Hitachi EC2-605 Manual de usuario

HITACHI MAINTENANCE CONSOLE

INSTRUCTION MANUAL







For Models: EC2-605/EC3-605/EC4-605



Issueyears August,2004

MaintenanceManualNo. ELM04-04R5

Classificationcode 11

Classificationname Displayoperationinstrument



Urban Planning & Development Systems Company

Hitachi Ltd.



2



About the contents of the Hitachi Maintenance Console Instruction Manual

1. The “Hitachi Maintenance Console Instruction Manual” describes the handling of “Hitachi Maintenance

Console (Models EC2-605/EC3-605/EC4-605).

2. “Hitachi Maintenance Console” is set up individually for each country it serves. It is not for international

use for which care should be taken.

3. “Hitachi Maintenance Console” is designed to indicate the conditions of an elevator, escalator and other,

and carry out their maintenance work. Hitachi Ltd. shall not be liable to any defect that may occur as

the result of operation other than stated in the manual, to which your understanding is requested in

advance.



3



CONTENTS



1.Outline of Hitachi Elevator Maintenance Console・・・・・・・・・・・・・・ 4

1.1 Applicable Models・・・・・・・・・・・・・・・・・・・・・・・・・・ 4

1.2 Accessories・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 5

1.3 Initialization ・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 6

1.4 Cautions ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 7

2.Name of the Sections and their Functions・・・・・・・・・・・・・・・・・・ 8

2.1 (1)Display ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 9

2.2 (2)Functional Selector Switch ・・・・・・・・・・・・・・・・・・・・ 9

2.3 (3) Power Button/(4) Operation Button ・・・・・・・・・・・・・・・・ 10

2.4 (5)BatteryBox ・・・・・・・・・・・・・・・・・・・・・・・・・・・ 10

2.5 (6) Connector ・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 11

3.Connection Method. How to Turn the Power ON-OFF・・・・・・・・・・・・ 12

4.Elevator / Escalator Mode ・・・・・・・・・・・・・・・・・・・・・・・・・ 16

4.1 Segment Indication of the Elevator・・・・・・・・・・・・・・・・・・・ 16

4.2 Dot Indication for the Elevator・・・・・・・・・・・・・・・・・・・・・ 17

4.3 Segment Indication of the Escalator・・・・・・・・・・・・・・・・・・・ 18

4.4 Dot Indication for the Escalator・・・・・・・・・・・・・・・・・・・・・ 19

4.5 Basic Method of Operation・・・・・・・・・・・・・・・・・・・・・・・ 20

4.6 Examples of Maintenance Work Function Operation・・・・・・・・・・・・ 21

5.Group/Door Mode (Only EC4-605)・・・・・・・・・・・・・・・・・・・・・ 22

5.1 Section Indication・・・・・・・・・・・・・・・・・・・・・・・・・・・ 22

5.2 Basic Method of Operation・・・・・・・・・・・・・・・・・・・・・・・ 23

Attachment・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 25

List of Mode Functions・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 25

List of Trouble Codes・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 26

List of Maintenance Console Error Codes・・・・・・・・・・・・・・・・・・・・ 27

Hardware Specifications・・・・・・・・・・・・・・・・・・・・・・・・・・・ 28



4

1. Outline of Hitachi Maintenance Console



This manual describes cautions and the method of using Hitachi Maintenance Console (hereinafter referred

to as Maintenance Console). Please read this manual carefully before actually carrying on elevator

maintenance work by using the maintenance console.



The Maintenance Console you have purchased is a dedicated maintenance terminal. It indicates the

following basic state of the elevator and implements adjustment:



●Operating state of the elevator/escalator

●State of trouble generated

●Adjustment function of the elevator/escalator (maintenance work function)



1.1 Applicable Models

The following types of the Maintenance Console are applicable to the following models of the elevators and

escalator and others.

Type Application Applicable machine models

EC2-605 For maintenance 1 Elevator B95 or later models

EC3-605

For maintenance 2 Elevator B95 or later models

EC4-605 For quality assurance Elevator B95 or later models/Escalator E98 or later

models/Groups/doors



5



1.2 Accessories

Check that the following 4 items illustrated are included in the accessory package:

(1) Main unit, Hitachi Maintenance Console

(2 ) Special connecting cable to the elevator

(3 ) Four (4) UM3 dry batteries (including 2 spare batteries)

(4 ) Instruction manual (this manual)



RESET

SET

MODE

A/D

INC

DEC

ﾄﾞｱ止(DOOR)

START

３

２

１

０

７

６

５

４

Ｂ

Ａ

９

８

Ｆ

Ｅ

Ｄ

Ｃ

OFF ON

12345678

MAINTENANCECONSOLE

日立保守コンソール取扱い説明書

(株)日立製作所

都市開発システムグループ

1) Main unit, Hitachi Maintenance Console

2) Special connecting cable to the elevator

3) UM3 batteries x 4

4) Instruction manual

1. Outline of Hitachi Maintenance Console

HITACHI MAINTENANCE CONSOLE

INSTRUCTION MANUAL

Urban Planning & Development Systems Company

HitachiLtd.HITACHI



6



1.3 Initialization

●Enter the name of the service country, etc. to the name plate on the back of the console.



Diagram: Rear of the Maintenance Console



Individual company is free to use

this name plate for the purpose of

control.

･Pleaseavoidhightemperature,highhumidityor

directrays.

･Pleasedonotimmerseinwaterordismantle

theconsole

･Pleaseavoidstrongimpactssuchasfall,etc.

･Whenconnectingacable,pleasetakenote

ofthedirectionoftheconnector

ELE/ESCONSOLE

TYPEEC2-601

MFG.No.

DATE

Hitachi,Ltd.TokyoJapan

S in gapor eN o. 1

1. Outline of Hitachi Maintenance Console



7



1.4 Cautions

Care should be taken for the following matters:

●Avoid using the Maintenance Console under extremely high-or low-temperature environment, in the

direct rays of the sun or near any heat-emitting devices.



●Keep the main unit of the console and the connecting cable dry. Avoid giving impact to them by falling,

etc. or it may cause a failure.

●When not using for an extended period of time, remove batteries from the battery box. Remove low

batteries from the battery box promptly or leakage, etc. may cause a failure.

●Never disassemble or modify the console. Hitachi Ltd. is not liable to a failure caused by the

disassembly by user.



●Avoid irregular, unnecessary operation during the use.

Do not change the functional switch selection or press two buttons or more simultaneously while in use, or

it may cause a failure or abnormal elevator operation.

●When connecting the cable, be careful for the direction of the connector on both the Maintenance Console

and the elevator. To give a longer life to the special connecting cable, user is recommended to keep the

cable connected to the Maintenance Console during storage.

●Please use the console, keeping as far away from noise source such as motor and machine base, as

possible, because it causes console malfunction or emergency stop of an elevator.



●Please turn off the console when the malfunction or the emergency stop occurs during use of console.

Remove the cable from elevator side, and refer to Installation and Maintenance Manual (the trouble

shooting for each devices).



●It will cause the failure and break if the polarity of a dry cell is mistaken.

Please set a battery to a console according to the polar display of a battery holder.



●Please keep it security at a set place after use, because the dust may cause the trouble.



●Warranty period：A Warranty period is for one year after product delivery.



●Guarantee range：The failure caused by you is not included in the warranty.

1. Outline of Hitachi Maintenance Console



8



2. Name of the Sections and their Functions



The diagram below shows the configuration of the Maintenance Console. This Section describes the

names of the sections and their main functions.



Side



Upper Surface

RESET

SET

MODE

A/D

INC

DEC

DRSTOP

START

３

２

１

０

７

６

５

４

Ｂ

Ａ

９

８

Ｆ

Ｅ

Ｄ

Ｃ

OFF ON

1 2 3 4 5 6 7 8

MAINTENANCE CONSOLE

(1)Display

(

7-se

ment LED

)

(

)

Functional Selector

(

)

Power Button



(

each button for ON and OFF

)

(

)

Operation Button

(

)

Cell box

(

)

Connector

L W

(

Total of 24 ke

s includin

8 functional buttons and

16 hexadecimal ke

)

(

Use 2 UM3 alkaline batteries

)

(

D-sub9 pins

)

Bottom



9



2.1 (1) Display

A 9-digit display for the elevator state of operation and the address/data during implementation of various

adjustments

Example of display – Operating state of the elevator



2.2 Functional Selector Switch

Switches for selecting function. Set up functions according to the function to be used and the machine type

to be connected to before turning the power ON. The switches become invalid after the power is ON. For

the method of setting, read Sections 4 and 5.



No.1 No.2 No.3 No.4 No.5 No.6 No.7 No.8

Function 1 Function 2 Function 3 Speed 1 Speed 2 Spare Spare Spare



Note) About low battery detection (Dot 9)

Flashing Dot 9 indicates that the remaining capacity of the batteries (alkaline cells) has reached

below 10%. Replace them with new alkaline batteries as soon as possible.

(New batteries last about 7 hours in continuous operation mode.)

(7, 8 and 9th digits)

Trouble section

(6th digit)

Direction of

operation

(4th and 5th

digits)

Elevator car

position

(3rd digit)

Trouble

Section 2

(1st and 2nd

digits)

Trouble code

(Dot9) (Dot7)

Low batter

detection Ke

detection (Dot 1 to 6)

Position indicator lam

(

See Section 4 for details

)

12345678

2. Name of the Sections and their Functions



10



2.3 (3) Power Button/(4) Operation Button



Power ON-OFF button. Pressing ON button for about 1 second or longer turns the Maintenance Console

ON. Pressing OFF button while the power is ON, the console is turned OFF.



Functional buttons. Used for setting and resetting data, selecting function (Mode), increasing/decreasing

value (INC/DEC), stopping door, starting the elevator and so forth.



Hexadecimal buttons. Used for entering adjustment and other values and address.



2.4 (5) Battery Box



Slide the battery box cover downward to

open. Set 2 batteries attached in the

direction shown in the diagram. To close

the box, fully slide the cover upward until it

clicks.

OFF

RESET

SET

MODE

A/D

INC

DEC

DRSTOP

START

３

２１０７６５

ＢＡ９８ＦＥＤＣ

４

2. Name of the Sections and their Functions

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Instrumento de medición de Hitachi

Hitachi

Hitachi L44LA1 Manual de usuario

Hitachi

Hitachi UST-5299 Manual de usuario

Hitachi

Hitachi C22K Manual de usuario

Hitachi

Hitachi UG 50Y Manual de usuario

Hitachi

Hitachi LM-C300 Series Manual de usuario

Hitachi

Hitachi OE700 Series Manual de usuario

Hitachi

Hitachi U-5100 Manual de usuario

Hitachi

Hitachi UST-5550 Manual de usuario

Hitachi

Hitachi L-8900 Manual de usuario

Hitachi

Hitachi L51K Manual de usuario

Hitachi

Hitachi EUP-C514 Manual de usuario

Hitachi

Hitachi SML44 Manual de usuario

Hitachi

Hitachi UST-9133 Manual de usuario

Hitachi

Hitachi Relion 670 Series Guía de inicio rápido

Hitachi

Hitachi L44LA Manual de usuario

Hitachi

Hitachi Relion 670 Series Instrucciones de uso

Hitachi

Hitachi Hi8 VM-H70E Manual de usuario

Hitachi

Hitachi HT7700 Manual de usuario

Hitachi

Hitachi Relion 670 Series Instrucciones de uso

Hitachi

Hitachi HDM 40 Manual de usuario

Hitachi

Hitachi Relion 670 Series Manual de usuario

Hitachi

Hitachi C25P Manual de usuario

Hitachi

Hitachi TransPortal Instrucciones de funcionamiento

Hitachi

Hitachi C253 Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario