Hirschmann PRS 40 EZ Manual de funcionamiento

HIRSCHMANN

P/N 031-300-190-201 Revision A 03/16/2006

PRS 40 EZ

OPERATOR’S / SERVICE MANUAL

Operator’s Manual PRS 40 EZ

NOTICE

Hirschmann, Inc. makes no warranty of any kind with regard to this material, including, but not limited

to, the implied warranties of merchantability and/or its fitness for a particular purpose.

Hirschmann, Inc. will not be liable for errors contained in this manual or for incidental or consequential

damages in connection with the furnishing, performance, or use of this manual. This document

contains proprietary information, which is protected by copyright, and all rights are reserved.

No part of this document may be photocopied, reproduced, or translated to another language without

the prior written consent of Hirschmann, Inc.

Hirschmann, Inc. reserves proprietary rights to all drawings, photos and the data contained therein.

The drawings, photos and data are confidential and cannot be used or reproduced without the written

consent of Hirschmann, Inc. The drawings and/or photos are subject to technical modification without

prior notice.

All information in this document is subject to change without notice.

MANUAL REVISIONS

REV DATE NAME DESCRIPTION

- 02/09/06 SB 06-010

A 03/16/06 SB 06-055

TABLE OF CONTENTS

1GENERAL INFORMATION..............................................................................................................1

2WARNINGS .....................................................................................................................................1

3FEATURES ......................................................................................................................................2

4SYSTEM DESCRIPTION.................................................................................................................2

4.1 CONSOLE.......................................................................................................................................2

4.1.1 Liquid Crystal Display ...........................................................................................................................2

4.1.2 Control Identification .............................................................................................................................3

4.2 OPERATION....................................................................................................................................4

4.2.1 MENU STRUCTURE ............................................................................................................................5

4.2.2 Installation.............................................................................................................................................6

5ANGLE .............................................................................................................................................7

5.1.1 Operation ..............................................................................................................................................7

5.1.2 Limits.....................................................................................................................................................7

5.1.3 Installation / Calibration Hardwired.......................................................................................................8

5.1.4 Calibration.............................................................................................................................................9

5.2 ANGLE .........................................................................................................................................10

6A2B ................................................................................................................................................12

6.1.1 Operation ............................................................................................................................................12

6.1.2 A2B limit..............................................................................................................................................15

6.1.3 Installation...........................................................................................................................................15

6.1.4 A2B Setup...........................................................................................................................................17

7WIND..............................................................................................................................................19

7.1.1 Operation ............................................................................................................................................19

7.1.2 LIMITS ................................................................................................................................................20

7.1.3 Installation...........................................................................................................................................20

7.1.4 Wind Setup .........................................................................................................................................21

8LOADCELL ....................................................................................................................................23

8.1.1 Operation ............................................................................................................................................23

8.1.2 LIMITS ................................................................................................................................................24

8.1.3 Installation...........................................................................................................................................25

8.1.4 Loadcell Setup ....................................................................................................................................26

8.1.5 Loadcell Calibration ............................................................................................................................26

9LINE RIDER ...................................................................................................................................28

9.1.1 Operation ............................................................................................................................................28

9.1.2 LIMITS ................................................................................................................................................29

9.1.3 Installation...........................................................................................................................................29

9.1.4 Linerider setup ....................................................................................................................................33

9.1.5 Linerider Calibration............................................................................................................................33

10 RADIO MODULE ...........................................................................................................................34

10.1INSTALLATION...............................................................................................................................34

11 ADDING SENSORS.......................................................................................................................36

12 SERVICE / TROUBLE SHOOTING ...............................................................................................37

12.1SCREENS .....................................................................................................................................38

12.1.1 To test the outputs: .............................................................................................................................38

12.1.2 To test the inputs: ...............................................................................................................................38

12.1.3 Battery level: .......................................................................................................................................39

12.2TROUBLESHOOTING......................................................................................................................40

12.3TROUBLESHOOTING MOISTURE.....................................................................................................41

12.3.1 Water Ingress .....................................................................................................................................41

13 MAINTENANCE .............................................................................................................................42

Operator’s / Service Manual, PRS 40 EZ

13.1 BATTERY REPLACEMENT ........................................................................................................... 42

14 PART NUMBERS...........................................................................................................................43

14.1CONSOLE ..................................................................................................................................43

14.2A2B .............................................................................................................................................44

14.3 WIND .........................................................................................................................................46

14.4ANGLE..........................................................................................................................................47

14.5ANTENNA OPTIONS .......................................................................................................................48

14.6LINERIDER....................................................................................................................................49

14.7LOADCELL .................................................................................................................................50

General Information

1 GENERAL INFORMATION

The PRS 40 EZ System has been designed to provide indication from various types of sensors, i.e.

A2B, Load, Wind and Angle.

The A2B system will warn the crane operator of a two-blocking condition of the crane. If a two-blocking

condition is approached, the system will warn the operator by sounding an audible alarm, flashing the

backlit LCD and locking out those functions which may aggravate the crane's condition, whenever

applicable.

If the system is set up for load, angle or wind, limits can be set by the user. When these limits are

exceeded the system will warn the operator by sounding an audible alarm, flashing the backlit LCD

and de-energize the lockout relay.

The system relay can be connected to the cranes lockout system. If so, the system will lock out when

exceeding any of the user limits.

NOTE: The term "two-block" is a crane term that refers to a condition when the load handling device

comes in contact with the boom head. This condition, if not prevented, may cause the wire rope to

break, allowing the load to fall. Either raising the load into the boom head, or telescoping the boom out

without paying attention to the hoist line can cause a "two- block" condition.

2 WARNINGS

The PRS 40 EZ System is an operational aid, which warns a crane operator of approaching two-block

conditions, which could cause damage to equipment and personal injury.

This device is not, and must not be a substitute for good, sound operator judgment, experience and

use of accepted safe crane operating procedures.

The responsibility for the safe operation of the crane remains with the crane operator who must ensure

that all warnings and instructions supplied are fully understood and observed.

Prior to operating the crane, the operator must carefully and thoroughly read and understand the

information in this manual to ensure that the operation and limitations of the system and the crane are

known.

The system can only work correctly, if all sensors/transmitters have been properly set. For

correct setup, the operator has to answer thoroughly and correctly all questions asked

during the setup procedure in accordance with the real rigging state of the crane. To prevent

material damage and serious or even fatal accidents, the correct adjustment of the system

has to be ensured before starting the crane operation.

Always refer to operational instructions and load charts provided by the crane manufacturer

for specific crane operation and load limits.

Operator’s / Service Manual, PRS 40 EZ

3 FEATURES

The PRS 40 EZ has the following features:

•Can be hardwired to most PAT sensors.

•Wireless operation option of multiple sensors.

•Easily and clearly shows the operator required information.

•Multi language. The system can be setup to display text in both English and Spanish.

•Multiple limits can be set.

•Minimum of 500 feet LOS.

•Can display in multiple units.

•Built in lockout relay. Rated at 5 amps

•Tare function.

•Low battery indication.

•Expandable

•Direct replacement for the EI33

4 SYSTEM DESCRIPTION

4.1 CONSOLE

The console has 2 functions:

•Accepts inputs from the crane operator (reeving, limits and setup)

•Displays important data and information from the sensors

The operator’s console should be mounted in the operator’s field of vision.

4.1.1 Liquid Crystal Display

The Liquid Crystal Display (LCD) used in the PRS 40 EZ console is a wide temperature-range graphic

display with transflective characteristics that give it a high visibility in sunlight and during backlit night

operation. Due to the nature of any LCD, it works on the principle of polarization of light. It should be

noted that dual polarizations that are at a certain angle to each other can reduce the amount of light

up to completely eliminating it if that angle becomes perpendicular. This can have significance if the

operator is wearing polarized sunglasses that happen to be perpendicularly polarized in relation to the

LCD’s polarization. In this rare case, the operator has to work without sunglasses or find different

sunglasses that do not have this characteristic, in order to avoid having the visibility of the display

impaired.

The LCD contains an automatic temperature compensation that will adjust the LCD’s contrast

according to the surrounding temperature.

System Description

4.1.2 Control Identification

Fig 2: Operator’s Console

Limit LED

LCD

Clear button

Select button

Up Button

Down Button

Button “SCROLL UP”

•Use this button to increase values or to scroll up.

•Changes which sensors are displayed and how each is displayed.

Button "SCROLL DOWN"

•Use this button to decrease values or to scroll down.

•Changes which sensors are displayed and how each is displayed

Button "SELECT"

•Use this button to enter the menu screen and to confirm selections.

Button "C"

•Generally used to back out of a selection and return to the previous

screen.

•Pushing this button for more than 1 second will bypass the control

lever lockout function of the system.

•Accesses the Tare function

Operator’s / Service Manual, PRS 40 EZ

Since button C can deactivate the lockout function of the system, the following instructions

must be obeyed:

•The by-pass function shall be used with discretion, as unwarranted use of it to override

the control lever lockout system can result in harm to the crane and danger to property

and persons.

•Never use the by-pass function to either overload or operate the crane in a non-

permissible range.

4.2 OPERATION

Upon switching on crane ignition switch, the system starts with an automatic test of the system, of

lamps and audible alarm. During the test, the LCD shows the console and system software version.

The PRS 40 EZ setup procedure allows the operator to input the sensors being used and the limits for

the sensors. The operator must complete the setup procedure for each sensor.

Tabla de contenidos

Otros manuales de Mezclador de música de Hirschmann

Hirschmann

Hirschmann PAT 050-350-061-351 Guía

Hirschmann

Hirschmann PAT IFLEX5 Manual de usuario

Hirschmann

Hirschmann PRS 35 EZ Manual de usuario

Hirschmann

Hirschmann Manitex vSCALE D3 Manual de usuario

Hirschmann

Hirschmann iSCOUT expert compact Manual de usuario

Manuales populares de Mezclador de música de otras marcas

Neve

Neve 8816 Manual de usuario

Mackie

Mackie Onyx Analogue Mixer Manual de usuario

Behringer

Behringer EUROPOWER PMP518M Manual de usuario

Peavey

Peavey S-32 Sanctuary Series Manual de usuario

Rane

Rane MP 4 Manual de usuario

True

True T9 Touchscreen Console Manual de usuario

Studiomaster

Studiomaster Air Pro 24 Manual de usuario

Pioneer

Pioneer SVM 1000 - Audio/Video Mixer Manual de usuario

Roland

Roland M-160 Manual de usuario

Yamaha

Yamaha MR1642 Manual de usuario

Ecler

Ecler MAC40v Manual de usuario

Pioneer

Pioneer DJM 909 - Battle Mixer W/Effects Manual de usuario

Veeder-Root

Veeder-Root TLS-350 Series Manual de usuario

Alto

Alto APM80.QUAD Manual de usuario

Omnitronic

Omnitronic PM-211 Manual de usuario

SoundCraft

SoundCraft B400 Manual de usuario

Roland

Roland SoundCanvas SC-8820 Manual de usuario

CARVIN

CARVIN RX 1200 Manual de usuario