Hilti NCV 10-22 Manual de usuario
1
2
3
4
5
6
7
8
9
*2370141* 2370141 English 1
Original operating instructions
1 Information about the operating instructions
1.1 About these operating instructions
• Read these operating instructions before the product is used or operated for the first time. This is a
prerequisite for safe, trouble-free handling and use of the product.
• Observe the safety instructions and warnings in these operating instructions and on the product.
• Always keep the operating instructions with the product and make sure that the product is accompanied
by these operating instructions only, when the product is given to other persons.
1.2 Explanation of symbols
1.2.1 Warnings
Warnings alert persons to hazards that occur when handling or using the product. The following signal words
are used:
DANGER
DANGER !
▶Draws attention to imminent danger that will lead to serious personal injury or fatality.
WARNING
WARNING !
▶Draws attention to a potential threat of danger that can lead to serious injury or fatality.
CAUTION
CAUTION !
▶Draws attention to a potentially dangerous situation that could lead to personal injury or damage to the
equipment or other property.
1.2.2 Symbols in the operating instructions
The following symbols are used in these operating instructions:
Comply with the operating instructions
Instructions for use and other useful information
Dealing with recyclable materials
Do not dispose of electric equipment and batteries as household waste
Hilti Liion battery
Hilti charger
1.2.3 Symbols in illustrations
The following symbols are used in illustrations:
These numbers refer to the illustrations at the beginning of these operating instructions.
The numbers in illustrations refer to important work steps or to components important for the
work steps. In the text, the corresponding numbers draw attention to these work steps or compo-
nents, e.g. (3).
Item reference numbers are used in the overview illustration and refer to the numbers used in
the key in the product overview section.
This symbol is intended to draw your special attention to certain points for handling the product.
2 English 2370141 *2370141*
1.3 Product-dependent symbols
1.3.1 Symbols on the product
The following symbols can be used on the product:
The product supports near-field communication (NFC) technology compatible with iOS and
Android platforms.
Li-ion battery
Never use the battery as a striking tool.
Do not drop the battery. Never use a battery that has suffered an impact or is damaged in any
other way.
Hilti Li-ion battery type series used. Observe the information given in the section headed In-
tended use.
If applied on the product, the product has been certified by this certification body for the US and
Canadian markets according to the applicable standards.
1.4 Product information
products are designed for professional users and only trained, authorized personnel are
permitted to operate, service and maintain the products. This personnel must be specifically informed about
the possible hazards. The product and its ancillary equipment can present hazards if used incorrectly by
untrained personnel or if used not in accordance with the intended use.
The type designation and serial number are printed on the rating plate.
▶Write down the serial number in the table below. You will be required to state the product details when
contacting Hilti Service or your local Hilti organization to inquire about the product.
Product information
Backpack NCV 1022
Generation 01
Serial no.
2 Safety
2.1 Safety precautions
WARNING Study all safety instructions and other instructions, images and technical data with
which this power tool is provided. Failure to observe the instructions below can result in electric shock,
fire and/or serious injury.
Keep all safety precautions and instructions for future reference.
▶Use the product and accessories only when they are in perfect working order.
▶Never tamper with or modify the product or accessories in any way.
▶Risk of injury by falling tools and/or accessories. Before starting work, check that the battery and installed
accessories are secure.
▶Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use
a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of
inattention while operating the power tool may result in serious personal injury.
▶Use product and accessories only in accordance with these instructions. Take the working conditions
and the work to be performed into account. Use of power tools for applications other than those intended
can result in hazardous situations.
▶Take good care of the power tool. Check that moving parts operate satisfactorily and do not jam, and
make sure that no parts are broken or damaged in such a way that the power tool might no longer
function correctly. Have damaged parts repaired before using the tool. Many accidents are caused by
poorly maintained power tools.
▶Do not lull yourself into a false sense of security and do not flout the safety rules for power tools,
even if you are familiar with the power tool after using it many times. Caress handling could cause
serious injury within fractions of a second.
▶Do not dip the product under water or into any other liquid.
*2370141* 2370141 English 3
Using and handling the cordless power tool
▶Recharge the batteries only with the chargers specified by the manufacturer. A charger that is
suitable for a certain type of battery may present a risk of fire when used with other types of battery.
▶Use only the specified batteries in power tools. Use of any other batteries may create a risk of injury
and fire.
▶When the battery is not in use, keep it away from paper clips, coins, keys, nails, screws and other
small metal objects that could cause bridging between the terminals. A short circuit between the
battery terminals may cause burns or a fire.
▶Liquid may leak from the battery if used incorrectly. Avoid contact with the liquid. If contact
accidentally occurs, flush with water. If the liquid contacts the eyes, also seek medical attention.
Liquid escaping from the battery can cause skin irritation or burns.
▶Do not use damaged or modified batteries. Damaged or modified batteries may behave unpredictably
and lead to fires, explosions or risk of injury.
▶Do not expose batteries to fire or excessive temperatures. Fires or temperatures over 130 °C (265
°F) may cause an explosion.
▶Follow all instructions on battery charging and never charge the battery or the battery-powered
tool outside the temperature range stated in the operating instructions. Incorrect charging or
charging outside the approved temperature range may destroy the battery and increase the risk of fire.
2.2 Careful handling and use of batteries
▶Comply with the following safety instructions for the safe handling and use of Li-ion batteries.
Failure to comply can lead to skin irritation, severe corrosive injury, chemical burns, fire and/or explosion.
▶Use only batteries that are in perfect working order.
▶Treat batteries with care in order to avoid damage and prevent leakage of fluids that are extremely
harmful to health!
▶Do not under any circumstances modify or tamper with batteries!
▶Do not disassemble, crush or incinerate batteries and do not subject them to temperatures over 80 °C
(176 °F).
▶Never use or charge a battery that has suffered an impact or been damaged in any other way. Check
your batteries regularly for signs of damage.
▶Never use recycled or repaired batteries.
▶Never use the battery or a battery-operated power tool as a striking tool.
▶Never expose batteries to the direct rays of the sun, elevated temperature, sparking, or open flame. This
can lead to explosions.
▶Do not touch the battery poles with your fingers, tools, jewelry, or other electrically conductive objects.
This can damage the battery and also cause material damage and personal injury.
▶Keep batteries away from rain, moisture and liquids. Penetrating moisture can cause short circuits,
electric shock, burns, fire and explosions.
▶Use only chargers and power tools approved for the specific battery type. Read and follow the relevant
operating instructions.
▶Do not use or store the battery in explosive environments.
▶If the battery is too hot to touch, it may be defective. Put the battery in a place where it is clearly visible
and where there is no risk of fire, at an adequate distance from flammable materials. Allow the battery to
cool down. If it is still too hot to touch after an hour, the battery is faulty. Consult Hilti Service or read the
document entitled "Instructions on safety and use for Hilti Li-ion batteries".
Observe the special guidelines applicable to the transport, storage and use of lithium-ion batteries.
→ page 8
Read the instructions on safety and use of Hilti Li-ion batteries that you can access by scanning
the QR code at the end of these operating instructions.
4 English 2370141 *2370141*
3 Description
3.1 Product overview 1
@Power outlet
;Catch, battery compartment
=Grip
%Air vents
&Lid, battery compartment
(Shoulder straps
)Battery
+Internal vibrator
§Waist strap
/Operating switch
3.2 Intended use
The product described is a backpack-type portable power supply. The power supply is designed to
accommodate Hilti Nuron Liion batteries of the B 22 series as the source of energy. The power supply is
intended solely for operation of an internal vibrator with built-in electric motor.
• For this product, use only Hilti Nuron lithium-ion batteries of the B 22 series. For optimum performance,
Hilti recommends the batteries stated in the table at the end of these operating instructions for this
product.
• For these batteries, use only Hilti chargers of the type series stated in the table at the end of these
operating instructions.
3.3 Items supplied
Portable power supply, operating instructions
Other system products approved for use with this product can be found at your local Hilti Store or at:
www.hilti.group
3.4 Status indicators of the Liion battery
Hilti Nuron Li-ion batteries can indicate state of charge, fault messages and the battery's state of health.
3.4.1 Indicators for state of charge and fault messages
WARNING
Risk of injury by a falling battery!
▶If the release button is pressed with a battery inserted in the product, subsequently check that the battery
is correctly re-engaged and secure.
Short-press the release button of the battery to get whichever of the following status indications is applicable
at the time.
State of charge and, if applicable, faults are indicated constantly as long as the connected product is
switched on.
Otros manuales para NCV 10-22
1
Tabla de contenidos
Idiomas:
Otros manuales de Herramientas para remaches de Hilti
