Multi Area Arming – “Away mode”- All Areas
Areas, also known as partitions, are groups of zones that can be controlled independently. your system can be
configured with up to eight areas, the individual area condition is indicated at the bottom of your VoiceNav. The
authorization level assigned to a user governs which areas a user can control, which means when they enter their pin
code, only those areas assigned to that user will be selectable. To have trouble free multi area control, listen and follow
all the voice prompts carefully.
Step How to: Arm all areas in a multi area system in the “Away Mode”
1. Close all protected doors and windows, ensure everyone has left the premises.
1Ensure the status light is lit green
2. [?]-[?]-[?]-[?] Enter your 4 or 6 digit user pin code.
3. [AWAY] Touch [Away]
4. [MENU]Touch menu to exit (Optional)
5. Vacate the premises immediately
Multi Area Arming – “Away Mode”- Single Areas
Independent area control adds an enormous amount of flexibility to your security system and your VoiceNav makes it
simple to control. You may wish to arm one area in the away mode and disarm another area, whilst arming a third in the
stay mode. Just follow the voice prompts and make your selection.
Step How to: Arm area 1 and area 2 only, in a multi area system in the “Away Mode”.
1. Close all protected doors and windows, ensure everyone has left the areas you wish to arm.
1Ensure the area lights of the areas you wish to arm are lit solid green, indicating all zones in
those areas are secure, or flashing green indicating all zones are secure apart from forced
armed zones.
2. [?]-[?]-[?]-[?] Enter your 4 or 6 digit user pin code.
3. [1] Selects area 1
4. [AWAY] Arms area 1 in the away mode
5. [2] Selects area 2
6. [AWAY]Arms area 2 in the away mode
7. [MENU] Touch menu to exit (Optional)
8. Vacate the areas being armed immediately
Multi Area Disarming – “All Areas”
Make your way to the VoiceNav through one of the designated entry / exit doors. When you are detected entering, your
VoiceNav will repeat a warning message for the duration of the entry delay until a valid pin code is entered. Your sirens
and communicator will activate at the end of the entry delay time if a valid pin code is not entered. Away and Stay
modes can be configured with different entry delay times, ask your service provider for further details.
Note: Only the area where the delay entry time is running will be disarmed, all other armed areas will remain armed.
Step How to:
Disarm all areas in a multi area system
1.
Enter the premises through your designated entry door. If your security system has been designed to detect
your presence when making your way to the VoiceNav, a warning message reminding you to turn off your
security system will now commence. If your presence is not detected, no warning message is announced,
simply enter your 4 or 6 digit user pin code at your VoiceNav. The following example is for systems that are
designed to detect your presence on entry.
2. [?]-[?]-[?]-[?] Enter your 4 or 6 digit user pin code
1Your system is now disarmed from either the Away or Stay modes.
Hills – VoiceNav V0.4 -8-
