-2-
INTRODUCTION
Thankyou for buying the PDC200 Reverse
Parking Sensor. This manual details the
installation and operation of your product.
Please read it carefully and keep to hand for
future reference
The PDC200 is an automatic reversing alert
system. It gives a safety warning which tells
the driver the distance between the rear of
the vehicle and any object in its path.
The sensor transmits an ultrasonic signal
when the car is reversing. When the signal
senses an object, it will be reected and
received by the PDC200 main unit. These
reected signals are analysed by the main
unit microprocessor to detect whether the
obstacle is in your path and at what distance.
Below are graphical representations of the
PDC200 detecting patterns:
FEATURES
The ideal assistant for reverse parking and•
driving.
Detects persons, objects etc. from ca.•
40cm up to ca. 1,50 meters behind the
vehicle.
Less risk for parking damage from unseen•
objects.
Distance between vehicle and object by•
clear sound and red, yellow or green lamp
indicators. Adjustable volume.
2 reverse sensors for optimal detection.•
Automatic activation when car is put in•
reverse mode.
Quick assembly with 2-wire installation and•
connectors.
A set consists of:
1 x main unit
2 x ultra sonic sensors
2 x cable (snap-on) connectors
4 x cable ties
4 x screws for sensors
1x power cable
and adhesive mounting tape
Read before use the instruction
manual.
Only suitable as reverse driving system•
Not suitable for vehicles with rear engines•
Do not use with a vehicle with reversing•
horn or alarm
Do not extend cables (might distort the•
sensors)
Do not paint or spray the sensor•
Install with car in horizontal position.•
A false response may be recorded if a DC•
to AC power converter is being used close
by.
80cm
190cm
