HIK VISION HiLook Manual de usuario

Network PTZ Camera·Quick Start Gui de

Multi-Sensor

Network PTZ Camera

Quick Start Guide

Network PTZ Camera·Quick Start Gui de

Quick Start Guide

Any and all information, including, among others, wordings, pictures,

gra phs are the properties of Hangzhou Hikvision Digital Technology

Co., Ltd. orits s ubsidiaries (hereinafter referred to be “Hikvision”).

Thi s user manual(hereinafter referred to be “the Manual”) cannot

be reproduced, changed, translated,or d istributed, partially or

wholly, by any means, without the prior written permission of

Hikvision. Unlessotherwise stipulated, Hikvision doesnot make any

warra nties, guaranteesor representations, express or implied,

regardingto the Manual.

About this Manual

Thi s Manual is applicable to Multi-Sensor Network PTZCamera.

The Manual i ncludes instructionsfor usingand managing the

product. Pi ctures, charts, images and all other i nformation

hereinafter are for description and explanation only. The

information contained in the Ma nual is subject to change, without

noti ce, due to firmware updates or other reasons. Please findthe

latest ve rsion in the company website

(http://overseas.hikvision.com/en/).

Pleaseuse thisuser manual under the guidance of professionals.

Trademarks Acknowledgement

and other Hikvision’s trademarks andlogosare the

properties ofHikvision in va rious jurisdictions. Other trademarks and

logos mentioned beloware the properties oftheir respective

owners.

Network PTZ Camera·Qui ck Sta rt Gui de

Legal Disclaimer

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE

PRODUCT DESCRIBED, WITH I TS HARDWARE,SOFTWARE AND

FIRMWARE, ISPROVIDED “AS IS”, WITH ALL FAULTS AND ERRORS,

AND HIKVISIONMAKES NO WARRANTIES, EXPRESSOR IMPLIED,

INCLUDING WITHOUT LIMITATION, MERCHANTABILITY,

SATI SFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND

NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WI LL HIKVISION,

ITS DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTSBE LIABLE TO

YOU FOR ANY SPECIAL,CONSEQUENTIAL, INCIDENTAL, OR INDIRECT

DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF

BUSINESSPROFITS, BUSINESSINTERRUPTION, OR LOSS OF DATA OR

DOCUMENTATION, INCONNECTION WITH THE USE OF THIS

PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE

POSSI BILITY OF SUCH DAMAGES.

REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF

PRODUCT SHALL BE WHOLLY AT YOUR OWN RISKS. HIKVISION SHALL

NOT TAKE ANY RESPONSIBILITES FOR ABNORMAL OPERATION,

PRI VACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER

ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET

SECURITY RISKS; HOWEVER, HIKVISIONWILL PROVIDE TIMELY

TECHNICAL SUPPORTIF REQUIRED.

SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL

RELEVANT LAWS IN YOUR JURISDICTION BEFORE USING THIS

PRODUCT INORDERTO ENSURE THAT YOURUSECONFORMS THE

APPLICABLE LAW. HIKVISION SHALL NOT BE LIABLE IN THEEVENT

THAT THISPRODUCT IS USED WITHILLEGITIMATE PURPOSES.

Network PTZ Camera·Qui ck Sta rt Gui de

iii

IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE

APPLICABLE LAW, THE LATER PREVAILS.

0504121080517

Network PTZ Camera·Qui ck Sta rt Gui de

Regulatory Information

FCC Information

Please take attention that changesor modification not expressly

approved by the party responsible for compliance could void the

user’s authority to operate the equipment.

FCC compliance: Thi s equipment has been tested and found to

comply with the limits for a Class B digital d evice, pursuant to part 15

of the FCCRules. These limits are designedto provide reasonable

protection against harmful interference i n a residentialinstallation.

Thi s equipment generates, uses and can radiate radio frequency

energy and, if notinstalled and used i n accordance with the

instructions, may cause harmful interference to radio

communications. However, there is noguarantee that interference

will not occur in a particular installation. If this equipmentdoes

cause harmful interference to radio or television reception, which

can be determinedbyturning the equipment off andon, the user is

encouraged to try to correct the interference by one or more of the

following measures:

—Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and receiver.

—Connect the equipment into an outlet on a circuit different from

tha t to which the receiver is connected.

—Consultthe dealer or an experienced radio/TV technician for help

FCC Conditions

Thi s device complies with part 15 of the FCC Rules. Operation is

s ubject to the followingtwo conditions:

Network PTZ Camera·Qui ck Sta rt Gui de

1. This device may not cause harmful interference.

2. This device must accept any i nterference received, including

interference that may cause undesired operation.

EU Conformity Statement

Thi s product and - i fapplicable- the supplied

accessories too are marked with "CE" and comply

therefore with the applicable harmonizedEuropean

s tandards listed under the EMC Directive

2014/30/EU, the RoHS Directive 2011/65/EU.

2012/19/EU (WEEEdirective): Products marked

with this symbolcannot be disposed ofas unsorted

municipal waste i n the European Union. For proper

recycling, return this product to your local supplier

upon the purchase of equivalent new equipment,

or dispose of it at designated collection points. For more information,

pleasesee: www.recyclethis.info.

2006/66/EC (battery directive): This product

contains a batterythat cannot be disposed of as

uns orted municipal waste in the European Union.

See the product documentation for specific battery

information. The battery is marked with this symbol,

whi ch may include lettering to i ndicate cadmium(Cd), lead (Pb), or

me rcury (Hg). For proper recycling, return the battery to your

supplier or to a designated collection point. For more information,

pleasesee: www.recyclethis.info.

Industry Canada ICES-003 Compliance

Network PTZ Camera·Qui ck Sta rt Gui de

Thi s device meets the CAN ICES-3 (B)/NMB-3(B) standards

requirements.

Safety Instruction

These instructions are intended to ensure that user can use the

product correctly to avoid danger or property loss.

The precaution measure is divided into “Warnings” and “Cautions”

Warnings: Se rious injury or death may occur i fany of the warnings

are neglected.

Cautions: Injury or equipment damage may occur if any of the

cautions are neglected.

Warnings

Input voltage should meet both the SELV (Safety Extra Low Voltage)

and the Limited Power Source with 12 VDC according to the

IEC60950-1 standard. Refer to technical specifications for detailed

information.

Warnings Followthese

safeguards to prevent

s erious injury or death.

Cautions Followthese

precautions to prevent

pote ntial injury or material

damage.

Network PTZ Camera·Qui ck Sta rt Gui de

vii

Do not connect several devicesto onepoweradapter as adapter

overload maycause over-heatingor a fire hazard.

Make sure that the plug is firmly connected to the power socket.

Make sure that the power has been disconnected before you wire,

install or dismantle the PTZ camera.

When the camera is mounted on wall or ceiling, the device shall

be fi rmly fixed.

If s moke, odor or noise rise from the device, turnoff the power at

once and unplug the power cable, and then contact the service

center.

If the camera does notwork properly, contactyour dealer or the

nearest service center. Never attempt todisassemble the camera

yourself. (We shallnot assume anyresponsibility for problems

caused by unauthorized repair or maintenance.)

Cautions

If the camera failsto synchronize l ocal time with that of the

network, you need to set up camera time manually. V isit the

camera (via webbrowser or client s oftware)and enter system

settings interface fortime settings.

Make sure the power supplyvoltage is correct before using the

camera.

Do not drop the camera or subject it to physical shock, and do not

exposeit to high electromagnetism radiation. Avoid installation on

vibrations surface or places subject toshock (ignorance can cause

device damage).

Network PTZ Camera·Qui ck Sta rt Gui de

viii

Do not touch senor moduleswith fingers. If cleaning is necessary,

use clean cloth with a bit of ethanol andwipe it gently. Ifthe

camera will not be used for an extendedperiod,replace the lens

cap to protect the sensor fromdirt.

Do not aim the camera at the sunor extra bright places. Blooming

or s mearingmay occur otherwise (which is not a malfunction),

and affect the endurance of sensor at the same time.

The s ensor may be burned out by a laser beam, so when a ny laser

equipment is in using, make sure that the surface of sensorwill

not be exposed to the laser beam.

Do not place the camera in extremely hot, cold, dustyor damp

locations,and do not expose it to high electromagnetic radiation.

To a void heat accumulation, good ventilation is required for

operating environment.

Keep the camera away from liquid while in use.

While in delivery, the camera shall be packedin its ori ginal packing,

or packing ofthe same texture.

Improper use or replacement ofthe battery may result in hazard

of explosion. Replace with the same or equivalent type only.

Dispose of used batteries accordingto the instructions provided

by the battery manufacturer.

Thi s product is not forhousehold use.

Network PTZ Camera·Qui ck Sta rt Gui de

Table of Contents

1 Overview......................................................................................... 1

2 Installation...................................................................................... 3

2.1 Installing the Memory Ca rd ...................................................... 3

2.2 Ceiling Mounting ...................................................................... 4

2.3 Wall Mounting.......................................................................... 7

2.4 Pendant Mounting.................................................................... 9

3 Setting the PTZ Camera over the LAN........................................... 12

3.1 Wiring..................................................................................... 12

3.2 Activating the Camera ............................................................ 13

3.2.1 Activa tion via Web Browser............................................. 13

3.2.2 Activation via SADP Software........................................... 15

3.3 Modifying the IP Address........................................................ 17

4 Accessing viaWeb Browser........................................................... 20

Otros manuales para HiLook

Tabla de contenidos

Otros manuales de Cámara de seguridad de HIK VISION

HIK VISION

HIK VISION DS-2CD4112F-I Guía del usuario

HIK VISION

HIK VISION DS-2XC6745G0-IZHS Manual de usuario

HIK VISION

HIK VISION DS-2TD4136T-25 Manual de usuario

HIK VISION

HIK VISION TurboHD DS-2CE38D8T-PIR Manual de usuario

HIK VISION

HIK VISION DS-2CD5A46GO-IZS Manual de usuario

HIK VISION

HIK VISION DS-2DF5284-A Manual de usuario

HIK VISION

HIK VISION DeepinView DS-2CD6425G0/F Series Manual de usuario

HIK VISION

HIK VISION DS-2CD8153F-EWI Manual de usuario

HIK VISION

HIK VISION HiLook THC-B129-LPS Manual de usuario

HIK VISION

HIK VISION DS-2XC6646G0/P-IZHS Manual de usuario

HIK VISION

HIK VISION DS-2DE5232W-AE3 Manual de usuario

HIK VISION

HIK VISION Turbo HD D8T Series Manual de usuario

HIK VISION

HIK VISION iDS-TCH44P-B Manual de usuario

HIK VISION

HIK VISION DS-2DE7430IW-AE Manual de usuario

HIK VISION

HIK VISION DS-2CD5AC5G0-IZS Manual de usuario

HIK VISION

HIK VISION iDS-TCV907-BIR Manual de usuario

HIK VISION

HIK VISION DS-2CC1197P(N)-A(-C) Manual de usuario

HIK VISION

HIK VISION DS-2CD2012-I Manual de usuario

HIK VISION

HIK VISION D0T Manual de usuario

HIK VISION

HIK VISION TURBO HD F1T Series Manual de usuario

HIK VISION

HIK VISION DS-2CD2185FWD-IS Manual de usuario

HIK VISION

HIK VISION HiLook IK-4142B-MH/W Manual de usuario

HIK VISION

HIK VISION DS-2CD883F-EW series Manual de usuario

HIK VISION

HIK VISION PanoVu iDS-2PT9122IX-DE/S Guía rápida

Manuales populares de Cámara de seguridad de otras marcas

Okina USA

Okina USA SIR36-870VF650LP Manual de usuario

Divio

Divio NDR155PA Manual de usuario

Canon

Canon VB-C500D Manual de usuario

Easy Access

Easy Access EasyGuard Manual de usuario

Vivotek

Vivotek FD9389-EHV-v2 Manual de usuario

TUYA

TUYA COSMO W2 Manual de usuario

Eusso

Eusso UNC7500-IR Guía de configuración

urmet domus

urmet domus 1096/204 Manual de usuario

VC VC20 series Manual de usuario

Axis

Axis Q1614 Manual de usuario

ieGeek

ieGeek DD201 Manual de usuario

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manual de usuario

Vicon

Vicon V662-D-1 Instrucciones de funcionamiento

Grundig

Grundig GCH-K0274P Manual de usuario

Lorex

Lorex VANTAGE LBC7032 Manual de usuario

4xem

4xem WPT Manual de usuario

Samsung

Samsung SCV-3082 Manual de usuario

Vitek

Vitek VTC-C544 Manual de usuario