HIK VISION ColorVu Manual de usuario

Configuration Guide of ColorVu

Camera LED Supplement Light

1 Brightness configuration of LED supplement light

Note:

1, When the camera is electrified, it is self-check at full power, and the supplement light is bright,

so avoid to stare at supplement light of camera;

2, LED supplement light will be locked in the light-on state for an hour after continuous switching

for 5 times in a short time due to manual test or ambient brightness change.

Path：【 Configuration】-【System】-【System Settings】-【External Device】

1.1 Enable supplement light

1.2 LED light brightness adjustment

LED light brightness can be set to Manual mode or Auto mode.

1.2.1 Manual mode

1. Select Manual mode in LED Light Brightness Adjustment;

2. Adjust LED light Brightness during level 1-100, 0 means no brightness;

3. Startup default is level 15 (sample model is 50, order model is 15)

1.2.2 Auto mode

1. Select LED Light Brightness Adjustment mode with Auto, camera will detect ambient brightness

automatically, adjusting the brightness of supplement light.

2. The level of LED light brightness can limit the maximum brightness of supplement light.

2 Mode configuration of LED Light On

Mode of LED Light On can be set to Timing or Auto.

2.1 Timing mode

1. Selecting Timing in LED Light On, camera will turn on/off the LED supplement light according to

Start/End Time;

2. Setting schedule time according to application requirements. Start time should be earlier than

End Time. Start Time can be on the previous day of End Time.

2.2 Auto mode

1. Camera will detect ambient brightness automatically with Auto mode, and turn on LED light

automatically. The mechanism is similar to the automatic adjustment of infrared supplement

lamplight;

2. Setting filtering time in the range of 0-120s;

When the ambient brightness exceeds the light limit and lasts for a period of time (as shown in the

picture below: 5 seconds), the camera begins to turn the light on and off. This setting prevents the

camera from continuing to turn on and off lights when the brightness changes rapidly;

3. Setting sensitivity in the range of 0-7;

The lower the sensitivity, the greater changing in ambient brightness is required before the camera

can turn on and off the light;

The higher the sensitivity, the lower the requirement of ambient brightness change;

4. Currently, the default mode is Auto. Adjusting the parameters or customizing the firmware if

need to turn off the light by default.

Tabla de contenidos

Otros manuales de Cámara de seguridad de HIK VISION

HIK VISION

HIK VISION Network Speed Dome Camera Manual de usuario

HIK VISION

HIK VISION DS-2CE11D0T-PIRL Manual de usuario

HIK VISION

HIK VISION UD04395B Manual de usuario

HIK VISION

HIK VISION DS-2CD2786G2T-IZS Manual de usuario

HIK VISION

HIK VISION DS-2CD2463G0-IW Manual de usuario

HIK VISION

HIK VISION DS-2CE16C2T-IR Manual de usuario

HIK VISION

HIK VISION DS-2TD2466-9X Manual de usuario

HIK VISION

HIK VISION DS-2CD51C5G0-IZS Manual de usuario

HIK VISION

HIK VISION Network Speed Dome Camera Manual de usuario

HIK VISION

HIK VISION DS-2CE7 H0T-IT Series Manual de usuario

HIK VISION

HIK VISION DS-2CD6D54G1-ZS Manual de usuario

HIK VISION

HIK VISION DS-2CD5A46G1-IZHS Manual de usuario

HIK VISION

HIK VISION DS-2TD4136T-9 Manual de usuario

HIK VISION

HIK VISION DS-2CD2412F-I Guía del usuario

HIK VISION

HIK VISION DS-2TD8167-190ZE2F/W Manual de usuario

HIK VISION

HIK VISION DS2CD726F-PT(W) Manual de usuario

HIK VISION

HIK VISION DS-2AE5223TI-A Manual de usuario

HIK VISION

HIK VISION I0M1000 Manual de usuario

HIK VISION

HIK VISION DS-2CC12D5S-IT3 Manual de usuario

HIK VISION

HIK VISION 2T series Manual de usuario

HIK VISION

HIK VISION DS-2CV2046G0-IDW Manual de usuario

HIK VISION

HIK VISION DS-2CE11D0T-PIRL Manual de usuario

HIK VISION

HIK VISION 4 Inch High Speed Dome Manual de usuario

HIK VISION

HIK VISION iDS-TCV907-BIR Manual de usuario

Manuales populares de Cámara de seguridad de otras marcas

Okina USA

Okina USA SIR36-870VF650LP Manual de usuario

Divio

Divio NDR155PA Manual de usuario

Canon

Canon VB-C500D Manual de usuario

Easy Access

Easy Access EasyGuard Manual de usuario

Vivotek

Vivotek FD9389-EHV-v2 Manual de usuario

TUYA

TUYA COSMO W2 Manual de usuario

Eusso

Eusso UNC7500-IR Guía de configuración

urmet domus

urmet domus 1096/204 Manual de usuario

VC

VC VC20 series Manual de usuario

Axis

Axis Q1614 Manual de usuario

ieGeek

ieGeek DD201 Manual de usuario

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manual de usuario

Vicon

Vicon V662-D-1 Instrucciones de funcionamiento

Grundig

Grundig GCH-K0274P Manual de usuario

Lorex

Lorex VANTAGE LBC7032 Manual de usuario

4xem

4xem WPT Manual de usuario

Samsung

Samsung SCV-3082 Manual de usuario

Vitek

Vitek VTC-C544 Manual de usuario