HIK VISION IVMS-4200 Manual de usuario

Wireless Bridge (Client)

User Manual

Wireless Bridge (Client) User Manual

Legal Information

About this Manual

The Manual includes instructions for using and managing the Product. Pictures, charts, images and

all other information hereinafter are for description and explanation only. The information

contained in the Manual is subject to change, without notice, due to firmware updates or other

reasons. Please find the latest version of this Manual at the Hikvision website

(https://www.hikvision.com/).

Please use this Manual with the guidance and assistance of professionals trained in supporting the

Product.

Trademarks

and other Hikvision's trademarks and logos are the properties of

Hikvision in various jurisdictions.

Other trademarks and logos mentioned are the properties of their respective owners.

Disclaimer

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT

DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED "AS IS" AND

"WITH ALL FAULTS AND ERRORS". HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED,

INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR

A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT

WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT

DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS

INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION,

WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT

LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION

HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.

YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT SECURITY

RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION,

PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK,

VIRUS INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE

TIMELY TECHNICAL SUPPORT IF REQUIRED.

YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE

SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW.

ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT

INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF

PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS.

YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE

DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR

Wireless Bridge (Client) User Manual

PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED

TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN

RIGHTS ABUSES.

IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER

PREVAILS.

Wireless Bridge (Client) User Manual

iii

Regulatory Information

FCC Information

Please take attention that changes or modification not expressly approved by the party

responsible for compliance could void the user's authority to operate the equipment.

FCC compliance: This equipment has been tested and found to comply with the limits for a Class A

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a

commercial environment. This equipment generates, uses, and can radiate radio frequency energy

and, if not installed and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a residential area is likely to

cause harmful interference in which case the user will be required to correct the interference at

his own expense.

FCC Conditions

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may cause

undesired operation.

EU Conformity Statement

This product and - if applicable - the supplied accessories too are

marked with "CE" and comply therefore with the applicable

harmonized European standards listed under the EMC Directive

2014/30/EU, the RoHS Directive 2011/65/EU.

2012/19/EU (WEEE directive): Products marked with this symbol

cannot be disposed of as unsorted municipal waste in the European

Union. For proper recycling, return this product to your local supplier

upon the purchase of equivalent new equipment, or dispose of it at

designated collection points. For more information see:

http://www.recyclethis.info.

2006/66/EC (battery directive): This product contains a battery that

cannot be disposed of as unsorted municipal waste in the European

Union. See the product documentation for specific battery

information. The battery is marked with this symbol, which may

include lettering to indicate cadmium (Cd), lead (Pb), or mercury

(Hg). For proper recycling, return the battery to your supplier or to a

designated collection point. For more information see:

http://www.recyclethis.info.

Wireless Bridge (Client) User Manual

Industry Canada ICES-003 Compliance

This device meets the CAN ICES-3 (A)/NMB-3(A) standards requirements.

Wireless Bridge (Client) User Manual

Preface

Applicable Models

This manual is applicable to iVMS-4200 client of the switch.

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol

Description

Danger

Indicates a hazardous situation which, if not avoided, will or could

result in death or serious injury.

Caution

Indicates a potentially hazardous situation which, if not avoided,

could result in equipment damage, data loss, performance

degradation, or unexpected results.

Note

Provides additional information to emphasize or supplement

important points of the main text.

Safety Instruction

Danger

●This is a class A product and may cause radio interference in which case the user may be

required to take adequate measures.

●No naked flame sources, such as lighted candles, should be placed on the equipment.

●The serial port of the equipment is used for debugging only.

●Install the equipment according to the instructions in this manual.

●To prevent injury, this equipment must be securely attached to the floor/wall in accordance

with the installation instructions.

●Keep vertical downward when moving or using the equipment.

Wireless Bridge (Client) User Manual

Caution

●In the use of the product, you must be in strict compliance with the electrical safety

regulations of the nation and region.

●The socket-outlet shall be installed near the equipment and shall be easily accessible.

●Do not connect several devices to one power adapter as adapter overload may cause

overheating or a fire hazard.

●Please make sure that the plug is firmly connected to the power socket.

Wireless Bridge (Client) User Manual 
vii 
Contents 
Chapter 1 Introduction ...............................................................................................................1 
Chapter 2 Device Management...................................................................................................2 
2.1 Activate the Device ...............................................................................................................2 
2.2 Add the Device ......................................................................................................................3 
Chapter 3 Device Status..............................................................................................................5 
Chapter 4 Network Configuration ...............................................................................................7 
Chapter 5 Wireless Network Configuration.................................................................................8 
Chapter 6 System Configuration ...............................................................................................10 
6.1 Device Information..............................................................................................................10 
6.2 User Management...............................................................................................................10 
6.3 Device Maintenance............................................................................................................11 
6.4 Log Management................................................................................................................. 11 
6.5 Security Configuration.........................................................................................................12 
Chapter 7 FAQ..........................................................................................................................13 
7.1 Why the device cannot start up?.........................................................................................13 
7.2 Why devices pairing failed? .................................................................................................13 
7.3 Why the wireless connection rate is relatively low? ...........................................................13 
7.4 Why the signal intensity is too low? ....................................................................................13 
7.5 Why the throughput is inadequate even with high signal quality?.....................................14 
7.6 Why there are excessive packet loss and time delay when PC Pings the device IP address?
............................................................................................................................................14 
Appendix A Communication Matrix .......................................................................................... 15 

Wireless Bridge (Client) User Manual

Chapter 1 Introduction

You can manage and configure the device through iVMS-4200, including device management,

network configuration, system configuration, etc.

Note

The wireless bridges vary with different models. The actual device prevails.

Wireless Bridge (Client) User Manual

Chapter 2 Device Management

The device can be configured and managed through iVMS-4200 software, mainly including

network parameter configuration, wireless configuration, system maintenance, and so on.

Note

●This chapter will briefly introduce the device management through iVMS-4200 software. For

other functions, please refer to User Manual of iVMS-4200 Software.

●All pictures in this manual are for illustration only, and the specific interface is subject to the

actual device.

2.1 Activate the Device

For the inactive devices, you are required to create a password to activate them before they can

be added to the software and work properly.

Before You Start

Make sure the device to be activated is connected to the network and is in the same network

segment with the PC running the client.

Steps

Note

This function should be supported by the device.

1. Run iVMS-4200 software.

2. Go to Device Management → Device.

3. Click Online Device to show the online devices.

The searched online devices are displayed in the list.

4. Check the device status (shown on Security Level column) and select an inactive device.

Figure 2-1 Online Inactive Device

5. Click Activate.

6. Create a password in the password field, and confirm the password.

Otros manuales para iVMS-4200

Tabla de contenidos

Otros manuales de Hardware de red de HIK VISION

HIK VISION

HIK VISION DS-3WF03C Manual de usuario

HIK VISION

HIK VISION DS-7104NI-SL Manual de usuario

HIK VISION

HIK VISION DS-7600NI-K2/4G Series Manual de usuario

HIK VISION

HIK VISION DS-3WF Series Manual de usuario

HIK VISION

HIK VISION DS-9608NI-ST Series Manual de usuario

HIK VISION

HIK VISION DS-MP7608HN Series Manual de usuario

HIK VISION

HIK VISION DS-7604NI-Q1 Manual de usuario

HIK VISION

HIK VISION DS-9508NIST Guía del usuario

HIK VISION

HIK VISION DS-3WF02C-5N/O Manual de usuario

HIK VISION

HIK VISION DS-E04NI-Q1 Manual de usuario

HIK VISION

HIK VISION DS-9608NI-I8 Manual de usuario

HIK VISION

HIK VISION HiLook NVR-216MH-C/16P Manual de usuario

HIK VISION

HIK VISION iDS-96000NXI-I16B Series Manual de usuario

HIK VISION

HIK VISION 7604NI-K1B Manual de usuario

HIK VISION

HIK VISION DS-9600 Series Manual de usuario

HIK VISION

HIK VISION DS-7608NI-M2 Series Manual de usuario

HIK VISION

HIK VISION DS-9608NI-I8 Manual de usuario

HIK VISION

HIK VISION DS-7600NI-K1 Manual de usuario

HIK VISION

HIK VISION DS-7716NI-I4/16P Manual de usuario

HIK VISION

HIK VISION DS-96128NI-E16 Manual de usuario

HIK VISION

HIK VISION DS-7716NI-I4/16P Manual de usuario

HIK VISION

HIK VISION DS-7716NXI-I4/16P/4S Manual de usuario

HIK VISION

HIK VISION DS-9616NI-I8 Manual de usuario

HIK VISION

HIK VISION iDS-9600NXI-I8/8FB Series Manual de usuario

Manuales populares de Hardware de red de otras marcas

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manual de usuario

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manual de usuario

Yudor

Yudor YDS-16 Manual de usuario

D-Link

D-Link ShareCenter DNS-320L Manual de usuario

Samsung

Samsung ES1642dc Instrucciones de uso

Honeywell Home

Honeywell Home LTEM-PV Instrucciones de montaje

evertz

evertz 7700 Series Manual de usuario

D-Link

D-Link ShareCenter DNS-343 Manual de usuario

Asante

Asante AsanteBridge 1012 Manual de usuario

FireBrick

FireBrick FB2700 Manual de usuario

Audiovox Electronics

Audiovox Electronics ARWH2T Manual de usuario

ADC

ADC DSX-1 Manual

NetComm

NetComm NF2 Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 5620 Manual de usuario

Dell EMC

Dell EMC XC6420 Series Manual de usuario

Lanner

Lanner NCA-1020A Manual de usuario

Allied Telesis

Allied Telesis AT-TN121-A Manual de usuario

Arista

Arista CCA-ETM-Q12 Manual de usuario

HIK VISION iVMS-4200 Manual de usuario

Manuales populares de Hardware de red de otras marcas