HIK VISION DS-K2802 Manual de usuario

DS-K2800 Series

Access Controller

Quick Start Guide

UD.6L0206D1184A01

DS-K2800 Serial Access Controller

User Manual

Any and all information, including, among others, wordings, pictures, graphs are

the properties of Hangzhou Hikvision Digital Technology Co., Ltd. or its subsidiaries

(hereinafter referred to be “Hikvision”). This user manual (hereinafter referred to

be “the Manual”) cannot be reproduced, changed, translated, or distributed,

partially or wholly, by any means, without the prior written permission of Hikvision.

Unless otherwise stipulated, Hikvision does not make any warranties, guarantees

or representations, express or implied, regarding to the Manual.

About this Manual

This Manual is applicable to Access Controller

Product Name

Serials

Access Controller

DS-K2801 Serials Access Controller

DS-K2802 Serials Access Controller

DS-K2804 Serials Access Controller

The Manual includes instructions for using and managing the product. Pictures,

charts, images and all other information hereinafter are for description and

explanation only. The information contained in the Manual is subject to change,

without notice, due to firmware updates or other reasons. Please find the latest

version in the company website (http://overseas.hikvision.com/en/).

Please use this user manual under the guidance of professionals.

Trademarks Acknowledgement

and other Hikvision’s trademarks and logos are the properties of

Hikvision in various jurisdictions. Other trademarks and logos mentioned below are

the properties of their respective owners.

Legal Disclaimer

DS-K2800 Serial Access Controller

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT

DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED “AS

IS”, WITH ALL FAULTS AND ERRORS, AND HIKVISION MAKES NO WARRANTIES,

EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY,

SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND

NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL HIKVISION, ITS

DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY

SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING,

AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS

INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH

THE USE OF THIS PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE

POSSIBILITY OF SUCH DAMAGES.

REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT

SHALL BE WHOLLY AT YOUR OWN RISKS. HIKVISION SHALL NOT TAKE ANY

RESPONSIBILITES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER

DAMAGES RESULTING FROM CYBER ATTACK, HACKER ATTACK, VIRUS INSPECTION,

OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY

TECHNICAL SUPPORT IF REQUIRED.

SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS

IN YOUR JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT

YOUR USE CONFORMS THE APPLICABLE LAW. HIKVISION SHALL NOT BE LIABLE IN

THE EVENT THAT THIS PRODUCT IS USED WITH ILLEGITIMATE PURPOSES.

IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE

LAW, THE LATER PREVAILS.

0100001060303

DS-K2800 Serial Access Controller

iii

Regulatory Information

FCC Information

FCC compliance: This equipment has been tested and found to comply with the

limits for a digital device, pursuant to part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference when the

equipment is operated in a commercial environment. This equipment generates,

uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely to cause

harmful interference in which case the user will be required to correct the

interference at his own expense.

FCC Conditions

This device complies with part 15 of the FCC Rules. Operation is subject to the

following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that

may cause undesired operation.

EU Conformity Statement

This product and - if applicable - the supplied accessories too are

marked with "CE" and comply therefore with the applicable

harmonized European standards listed under the EMC Directive

2004/108/EC, the RoHS Directive 2011/65/EU.

2012/19/EU (WEEE directive): Products marked with this

symbol cannot be disposed of as unsorted municipal waste in

the European Union. For proper recycling, return this product

to your local supplier upon the purchase of equivalent new

equipment, or dispose of it at designated collection points. For

more information see: www.recyclethis.info.

DS-K2800 Serial Access Controller

2006/66/EC (battery directive): This product contains a battery that cannot be

disposed of as unsorted municipal waste in the European Union. See the product

documentation for specific battery information. The battery is marked with this

symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or

mercury (Hg). For proper recycling, return the battery to your supplier or to a

designated collection point. For more information see: www.recyclethis.info.

Industry Canada ICES-003 Compliance

This device meets the CAN ICES-3 (A)/NMB-3(A) standards requirements.

DS-K2800 Serial Access Controller

Preventive and Cautionary Tips

Before connecting and operating your device, please be advised of the

following tips:

•Ensure unit is installed in a well-ventilated, dust-free environment.

•Keep all liquids away from the device.

•Ensure environmental conditions meet factory specifications.

•Ensure unit is properly secured to a rack or shelf. Major shocks or jolts to the unit as a

result of dropping it may cause damage to the sensitive electronics within the unit.

•Use the device in conjunction with an UPS if possible.

•Power down the unit before connecting and disconnecting accessories and peripherals.

•A factory recommended HDD should be used for this device.

•Improper use or replacement of the battery may result in hazard of explosion. Replace

with the same or equivalent type only. Dispose of used batteries according to the

instructions provided by the manufacturer.

Safety Information

Signs

Description

Warning

Follow these safeguards to prevent

serious injury or death.

Note

Follow these precautions to prevent

potential injury or material damage.

Tips

The additional information as a

complimentary of the contents.

Warnings:

Please adopt the power adapter from the legitimate factory which can meet the safety extra

low voltage (SELV) standard.

Do not install, wiring, or uninstall when the power is still on.

DS-K2800 Serial Access Controller

To reduce the risk of fire or electrical shock, do not expose this product to rain or moisture.

This installation should be made by a qualified service person and should conform to all the

local codes.

If the product does not work properly, please contact your dealer or the nearest service

center. Never attempt to disassemble the camera yourself. (We shall not assume any

responsibility for problems caused by unauthorized repair or maintenance.)

Note:

Please do not drop the objects on hard surface, and keep the equipment from the magnetic

field. Avoid install the equipment to the vibrated or vulnerable places.

Please do not install the device in the extreme temperature (higher than 65℃or lower than

-20℃)

Keep ventilation.

Do not operate in humid environment.

Do not operate in explosive environment.

Keep the device clean and dry.

Avoid bare electrical wire.

DS-K2800 Serial Access Controller

Table of Contents

CHAPTER 1 PRODUCT DESCRIPTION................................................................. 2

1.1 OVERVIEW .......................................................................................................2

1.2 PRODUCT FUNCTION ..........................................................................................2

CHAPTER 2 APPEARANCE................................................................................. 4

CHAPTER 3 TERMINAL CONNECTION ............................................................... 6

3.1 DS-K2801TERMINAL DESCRIPTION ......................................................................6

3.2 DS-K2802TERMINAL DESCRIPTION ......................................................................8

3.3 DS-K2804 TERMINAL DESCRIPTION ...................................................................11

CHAPTER 4 EXTERNAL DEVICE WIRING .......................................................... 15

4.1 CARD READER WIRING .....................................................................................15

4.2 INSTALLING DOOR LOCK ....................................................................................16

4.2.1 Installation of Cathode Lock ................................................................16

4.2.2 Installation of Anode Lock ...................................................................16

4.3 CONNECTING THE EXTERNAL ALARM DEVICE.........................................................17

4.4 DOOR BUTTON WIRING DIAGRAM......................................................................17

4.5 THE CONNECTION OF MAGNETICS DETECTION.......................................................18

4.6 CONNECTING POWER SUPPLY.............................................................................18

CHAPTER 5 SETTINGS..................................................................................... 19

5.1 INITIALIZING THE HARDWARE .............................................................................19

5.2 RELAY INPUT NO/NC.......................................................................................19

5.2.1 Lock Relay Output................................................................................19

5.2.2 Alarm Relay Output Status ..................................................................20

CHAPTER 6 ACTIVATING THE CONTROL PANEL ............................................... 23

6.1 ACTIVATION VIA SADP SOFTWARE ......................................................................23

6.2 ACTIVATION VIA CLIENT SOFTWARE .....................................................................25

DS-K2800 Serial Access Controller

Chapter 1 Product Description

1.1 Overview

DS-K2800 is a powerful and stable access controller, using the logical architecture design.

DS-K2800 is designed with TCP/IP network interface and its signal processed with special

encryption and can be run offline. Anti-tampering function is also supported.

1.2 Product Function

The access controller is equipped with 32-bit high-speed processor

Supports TCP/IP network communication, with self-adaptive network interface.

The communication data is specially encrypted to relieve the concern of privacy

leak

Supports recognition and storage of card number with maximum length of 20

The access controller can store 10 thousand legal cards and 50 thousand card

swiping records

Supports first card open function, super card and super password function, online

upgrade function and remote control of the doors

Supports Wiegand interface for accessing card reader. Wiegand interface supports

W26/W34, Private W26/W34 and is seamlessly compatible with third-party card

reader with Wiegand interface

Supports various card types as normal/ disabled/ blacklist/ patrol/ guest/ duress/

super card, etc.

Various indicators to show different status

Supports time synchronization via NTP, manual or automatic method

Supports record storage function when it is offline and insufficient storage space

storage alarm function

The access controller has watchdog design

DS-K2800 Serial Access Controller

Data can be permanently saved after the access controller is powered off.

Supports I/O linkage, and event linkage

Supports alarm of offline event exceeding 90%

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Controladores de acceso IP de HIK VISION

HIK VISION

HIK VISION DS-K1T804AMF Manual de usuario

HIK VISION

HIK VISION DS-K1T501 Manual de usuario

HIK VISION

HIK VISION 26 series Manual de usuario

HIK VISION

HIK VISION DS-K5671-3XF Series Manual de usuario

HIK VISION

HIK VISION DS-TME401-TPC Manual de usuario

HIK VISION

HIK VISION DS-K1T804EF Manual de usuario

HIK VISION

HIK VISION DS-K1T105 Series Manual de usuario

HIK VISION

HIK VISION DS-K1A802 Series Manual de usuario

HIK VISION

HIK VISION DS-K1T501SF Manual de usuario

HIK VISION

HIK VISION DS-K4E100 Manual de usuario

HIK VISION

HIK VISION DS-K1TA70MI-T Manual de usuario

HIK VISION

HIK VISION DS-K1T673-T Series Manual de usuario

HIK VISION

HIK VISION DS-K3B601 Manual de usuario

HIK VISION

HIK VISION DS-K5603-Z Manual de usuario

HIK VISION

HIK VISION DS-K1T6QT-F43 Series Manual de usuario

HIK VISION

HIK VISION MinMoe DS-K1T671TM-3XF Manual de usuario

HIK VISION

HIK VISION UD12126B-B Manual de usuario

HIK VISION

HIK VISION DS-K2600 Series Manual de usuario

HIK VISION

HIK VISION DS-K1T802 Manual de usuario

HIK VISION

HIK VISION DS-K5603-Z Manual de usuario

HIK VISION

HIK VISION DS-K1T803MF Manual de usuario

HIK VISION

HIK VISION DS-K3M200 Manual de usuario

HIK VISION

HIK VISION DS-K1T105M Guía de seguridad

HIK VISION

HIK VISION DS-K2600 Series Manual de usuario

Manuales populares de Controladores de acceso IP de otras marcas

ZKTeco

ZKTeco SpeedFace-V5L Manual de usuario

Jantar

Jantar REX A-1-9 Manual de usuario

2N Access Unit Hoja de instrucciones

Kedacom

Kedacom KSCA120 Series Manual de usuario

H3C

H3C WX2880X Manual de usuario

G4S

G4S S870-EX Guía

PRASTEL

PRASTEL M2000PE Manual de usuario

Allegion

Allegion interflex IF-281 Cylinder Manual de usuario

TECOM

TECOM TS1067E Manual de usuario

Fermax

Fermax Memokey 100C Guía del usuario

Fermax

Fermax CITYLINE MEMOKEY Manual de instrucciones

Software House

Software House iSTAR Pro 2U RM Manual de instrucciones

AKCP

AKCP SP+ Manual de usuario

Bpt

Bpt HNA/102 Manual de usuario

Civintec

Civintec CV9601T-T-1F Manual de usuario

BioMax

BioMax N-X90W Manual de usuario

ZKTeco

ZKTeco OP-200 Manual de usuario

FingerTec

FingerTec s-Kadex Manual de usuario