4.10.1 Installing an expansion board in slot 1
4.10.2 Installing an expansion board in slot 2
4.10.3 Installing an optional primary PCI riser board
4.10.4 Installing the NVMe M.2 riser option
4.10.5 Installing an accelerator or GPU in the primary riser cage
4.11 Secondary PCI riser options
4.11.1 Installing a secondary full-height PCI riser cage option
4.11.2 Installing a secondary low-profile PCIe slot riser cage option
4.11.3 Installing an expansion board in the secondary riser cage
4.11.4 Installing an accelerator or GPU in the secondary riser cage
4.12 Storage controller options
4.12.1 Installing a type-a Smart Array storage controller option
4.12.2 Installing a type-p storage controller option
4.13 Processor and heatsink options
4.13.1 Installing a processor heatsink assembly
4.13.2 Installing a high performance heatsink
4.14 Installing the Systems Insight Display power module
4.15 Installing an OCP 3.0 adapter card
4.16 Installing the serial cable option
4.17 Installing the Chassis Intrusion Detection switch option
4.18 Installing the Pensando DSP DSC-25 SFP28 card
4.19 Installing the HPE NS204i-p Gen10 Plus Boot Device option
4.20 HPE Trusted Platform Module 2.0 Gen10 option
4.20.1 Overview
4.20.2 HPE Trusted Platform Module 2.0 guidelines
4.20.3 Installing and enabling the HPE TPM 2.0 Gen10 option
4.20.3.1 Installing the Trusted Platform Module board
4.20.3.1.1 Preparing the server for installation
4.20.3.1.2 Installing the TPM board and cover
4.20.3.1.3 Preparing the server for operation
4.20.3.2 Enabling the Trusted Platform Module
4.20.3.2.1 Enabling the Trusted Platform Module as TPM 2.0
4.20.3.2.2 Enabling the Trusted Platform Module as TPM 1.2
4.20.3.3 Retaining the BitLocker recovery key/password
5 Cabling
5.1 Cabling guidelines
5.2 Front I/O cabling
5.3 Storage cabling
5.3.1 SFF cables
5.3.1.1 8SFF x1 Tri-Mode U.3 backplane + 2SFF NVMe backplane to type-p Tri-Mode controller
5.3.1.2 8SFF x4 + 2SFF backplanes to type-p controller
5.3.1.3 8SFF x4 + 2SFF backplanes to type-a and type-p controllers
5.3.1.4 2SFF x4 backplane to primary NVMe riser
5.3.1.5 8SFF x1 Tri-Mode U.3 backplane to type-p controller on slot 2
