HEPER C-LIGHT Manual

8 1⁄ 2 "

5 1⁄ 2"

7 1 ⁄ 2"

Steel Rope

M10 Hexagon Bolt

33 lb ft

M10 Nut

33 lb ft

Fixing Screw

7,37 lb ft

1 1⁄4"

4 x M4

Allen Screw

1,84 lb ft

4 x M5

Allen Screw

4 lb ft

Control Gear

18 1 ⁄ 2"

8 1 ⁄ 4"

3 x M5

Cross-slotted bolts

4 lb ft

2 x M5

Cross-slotted bolts

4 lb ft

C-LIGHT

1⁄4"

Designates 1-10 V DIM connection.

(1-10V) +

Brown

(1-10V) -

White

4.2

4.1

Installation and Maintenance Manual

Control Gear

HEPER USA LLC

W227 N546 Westmound

Drive Waukesha

WI 53186 – USA

Tel: +1 917 244 20 32

[email protected]

www.heperlighting.com

By turning the movable hanging apparatus of the luminaire you can

adjust the rope direction. After the apparatus is locked on the rope,

screw the M8 setscrew to fix.

Pass the rope by loosening the M10 key head bolt that provides the

connection of the hanging apparatus. Complete the assembly by

screwing M10 nut.

Shows the electrical connections of the luminaire.

6. After the Control gear is pulled out, unscrew the M5 Cross-slotted bolts

from the Driver sheet.

SELV (Safety Extra-Low Voltage)

Luminaire: IP66

Safety Standard: Class I

Impact strenght: IK08

220-240 V AC 50-60 Hz

HEPER USA LLC

W227 N546 Westmound

Drive Waukesha

WI 53186 – USA

Tel: +1 917 244 20 32

[email protected]

www.heperlighting.com

C-LIGHT

Installation and Maintenance Manual

ASSEMBLY INSTRUCTIONS

English

4.To be able to change the module; please detach the electrical

connections of the product. After unscrew the 4xM4 bolts that provides

module connection, disconnect the socket that links electrical

connection.Given in figure 4.1. By doing so, the module is removed from

the housing. Get the the module that will be replaced and make sure its

electrical connections are done.See figure 4.2. Screw the bolts that fix

the module to housing.

5.To be able to change the LED Driver, firstly the electrical connection

must be turned off.Then unscrew the 4xM5 bolts.Pull out the control

gear.

WARNINGS AND REMARKS FOR

INSTALLATION AND MAINTENANCE

Safety Instructions

•The light source contained in this luminaire shall only be

replaced by the manufacturer or his service agent or a

similar qualified person. Always switch off the power prior

to installation, maintenance or repair activities.

•The manufacturer is then discharged from liability when

damage is caused by improper use or installation.

•If any luminaire is subsequently modified, the persons

responsible for the modification shall be considered as

manufacturer.

•To reduce the risk of death, personal injury or property

damage from fire, electric shock, falling parts, cuts,

abrasions and other hazards, please read all warnings and

instructions included with the luminaire, on the luminaire’s

packaging and affixed to the luminaire itself..

Installatio

•LEDs are high-quality electronic components!

Please avoid contacting the light output opening of

the LED directly during installation or relamping.

IMPORTANT

•To ensure secure connection, the luminaire housing

must be positioned precisely in relation to the

mounting plate.

Cleaning And Maintenance

•Clean luminaire regularly with solvent-free cleaners

from dirt. Please do not do not clean the luminaire

with using high-pressure liquids.

Este manual sirve para los siguientes modelos

Otros manuales de Equipo de iluminación de HEPER

HEPER

HEPER PUNTO L Instrucciones de instalación y funcionamiento

HEPER

HEPER DOMINI 12 LED Instrucciones de instalación y funcionamiento

HEPER

HEPER VERTEX 1 Instrucciones de instalación y funcionamiento

HEPER

HEPER TURA 3x16 LED Instrucciones de instalación y funcionamiento

HEPER

HEPER LB6048.575-EN Instrucciones de instalación y funcionamiento

HEPER

HEPER PINUS 360 2 Module Instrucciones de instalación y funcionamiento

HEPER

HEPER REGIO 3 Instrucciones de instalación y funcionamiento

HEPER

HEPER LW6048.575-EN Instrucciones de instalación y funcionamiento

HEPER

HEPER VEGA Instrucciones de instalación y funcionamiento

HEPER

HEPER TURA 1x16 LED Manual de usuario

HEPER

HEPER GOLEDO-T 32 LED Instrucciones de instalación y funcionamiento

HEPER

HEPER PRIFMA ML EVO 1 Duo Instrucciones de instalación y funcionamiento

HEPER

HEPER RHINO ML 1 Instrucciones de instalación y funcionamiento

HEPER

HEPER PINA W Instrucciones de instalación y funcionamiento

HEPER

HEPER DRAGO 8 LED LB6048.910-EN Manual de usuario

HEPER

HEPER AQSA 1 m Instrucciones de instalación y funcionamiento

HEPER

HEPER D-LIGHT AFX 2 Module Instrucciones de instalación y funcionamiento

HEPER

HEPER LL2036.752-US Instrucciones de instalación y funcionamiento

HEPER

HEPER TERRA LP4024.539-EN Instrucciones de instalación y funcionamiento

HEPER

HEPER POLSO Instrucciones de instalación y funcionamiento

HEPER

HEPER LT2037.882-US Instrucciones de instalación y funcionamiento

HEPER

HEPER DRAGO Forward Instrucciones de instalación y funcionamiento

HEPER

HEPER OLIVA Instrucciones de instalación y funcionamiento

HEPER

HEPER PUNTO S Instrucciones de instalación y funcionamiento

Manuales populares de Equipo de iluminación de otras marcas

Brizo

Brizo 8SP-MU-4 Manual de usuario

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Manual de usuario

IKEA

IKEA BJÖRKSPIREA Manual de usuario

Laserworld

Laserworld Evolution Series ES-400RGB Manual de usuario

Alien

Alien RG STAR Manual de usuario

EuroLite

EuroLite LED B-40 Manual de usuario

Qazqa

Qazqa Suplux SL 3 Black 103062 Manual de usuario

Commercial Electric

Commercial Electric 54568141 Manual de usuario

CREE LIGHTING

CREE LIGHTING 304 Series Manual de usuario

Goobay

Goobay 49867 Manual de usuario

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Manual de usuario

Alkalite

Alkalite Krypton KT-81 Manual de usuario

Clas Ohlson

Clas Ohlson GU10 Manual de usuario

DTS

DTS DELTA 10 F Manual de usuario

ring

ring Solar Steplight Manual de usuario

One Stop Gardens

One Stop Gardens 57696 Instrucciones de montaje

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Manual de usuario

SIREM

SIREM Swimeo A2 Manual de usuario