HEPER DOMINI 12 LED Instrucciones de instalación y funcionamiento

1/3 2022-1 / 27/01/2022

Installation & Maintenance

Instructions

HEPER USA LLC

W227 N546 Westmound Drive Waukesha, 53186

Wisconsin, United States

+1 262 888 0262

[email protected]

DOMINI 12 LED (LB6047.551-US)

12.7 lbss

https://heperlighting.com/us/lb6047.551-us/

2/3

3/3

English ( USA )

Safety

- This product must be installed in accordance with applicable

NEC standards by a qualified electrician familiar with the

installation of exterior lighting fixtures.

- This product must be operated under specified voltage at all

times.

- Do not install if parts are damaged.

- Power must be disconnected while installing or servicing to

avoid electrical shock.

- Failing to comply with warnings and installation steps in this document

might void warranty.

- Do not touch the light source.

- Make sure that temperature of the product is at a safe level before

touching.

- Do not allow cables to touch sharp edges of metal parts or other sharp

objects to avoid damage or abrasion.

- Check all of the cable connections including grounding before

powering the product.

- Check the proper grounding of the metal housing before powering the

product.

- Only use the product for its intended purposes.

- Do not use accessories not approved or recommended by HEPER.

Installation

- The surface on which the product will be mounted must be flat and

level

- Assemble the product base using the provided or appropriate

hardware.

- Place the base of the product centered onto the concrete base and

secure the bolts as shown on the visual.

- To assemble the product, use IP 68 rated connector.

Replacement of the control gear

- Disconnect the power coming into the product.

- To be able to remove the product, detach the cable connections and

ground connections.

- Disassemble the product head.

- Remove the plate to gain access to the driver location.

- Remove the driver holder.

- Detach the driver and place the new one.

- Diassemble the product from the bottom and take out the driver box.

(The location may differ depending on the type of driver.)

- Reinstall the product following the same steps.

- The completed product installation should be as shown on the visual.

Cleaning - Maintenance

- This product was designed and manufactured to operate for a long

period of time. To ensure maximum lifespan of the product, regular (i.e.

every six months) visual inspection and cleaning with a solvent-free

cleaner using a soft cloth is recommended.

- Do not clean or service while the product is power connected.

Disposal

- In accordance with EU Directive WEEE (Waste Electrical and

Electronic Equipment), luminaires must not be disposed of with

other household waste. At the end of their life, luminaires must

be taken to the appropriate local facility available for the

disposal or recycling of electronic products.

USA Wire Colour Codes

- Ground - GREEN

- Line - BLACK

- Neutral - WHITE

- Dim(+) - RED/PURPLE

- Dim (-) - ORANGE

Disclaimer

- HEPER reserve the right to make technical and design changes.

Este manual sirve para los siguientes modelos

Otros manuales de Equipo de iluminación de HEPER

HEPER

HEPER DOGO Instrucciones de instalación y funcionamiento

HEPER

HEPER LL2044.862-EN Instrucciones de instalación y funcionamiento

HEPER

HEPER D-LIGHT AFX 5 Instrucciones de instalación y funcionamiento

HEPER

HEPER DOMINO ML EVO 1 Duo Instrucciones de instalación y funcionamiento

HEPER

HEPER DRAGO Forward Duo Instrucciones de instalación y funcionamiento

HEPER

HEPER KREIS C Instrucciones de instalación y funcionamiento

HEPER

HEPER POLSO Instrucciones de instalación y funcionamiento

HEPER

HEPER TURA 3x16 LED Instrucciones de instalación y funcionamiento

HEPER

HEPER TERRA LP4024.539-EN Instrucciones de instalación y funcionamiento

HEPER

HEPER VEGA Instrucciones de instalación y funcionamiento

HEPER

HEPER LF8018.694-EN Instrucciones de instalación y funcionamiento

HEPER

HEPER GOLEDO-T 32 LED Instrucciones de instalación y funcionamiento

HEPER

HEPER PRIFMA AFX 2 Instrucciones de instalación y funcionamiento

HEPER

HEPER LB6048.575-EN Instrucciones de instalación y funcionamiento

HEPER

HEPER C-LIGHT Manual

HEPER

HEPER LL2044.861-EN Instrucciones de instalación y funcionamiento

HEPER

HEPER KREIS Instrucciones de instalación y funcionamiento

HEPER

HEPER PUNTO S Instrucciones de instalación y funcionamiento

HEPER

HEPER RHINO ML 1 Instrucciones de instalación y funcionamiento

HEPER

HEPER OLIVA Instrucciones de instalación y funcionamiento

HEPER

HEPER REGIO 3 Instrucciones de instalación y funcionamiento

HEPER

HEPER GOLEDO-T 16 Instrucciones de instalación y funcionamiento

HEPER

HEPER DRAGO Side Duo Instrucciones de instalación y funcionamiento

HEPER

HEPER TURA LL2036.753-US Instrucciones de instalación y funcionamiento

Manuales populares de Equipo de iluminación de otras marcas

Brizo

Brizo 8SP-MU-4 Manual de usuario

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Manual de usuario

IKEA

IKEA BJÖRKSPIREA Manual de usuario

Laserworld

Laserworld Evolution Series ES-400RGB Manual de usuario

Alien

Alien RG STAR Manual de usuario

EuroLite

EuroLite LED B-40 Manual de usuario

Qazqa

Qazqa Suplux SL 3 Black 103062 Manual de usuario

Commercial Electric

Commercial Electric 54568141 Manual de usuario

CREE LIGHTING

CREE LIGHTING 304 Series Manual de usuario

Goobay

Goobay 49867 Manual de usuario

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Manual de usuario

Alkalite

Alkalite Krypton KT-81 Manual de usuario

Clas Ohlson

Clas Ohlson GU10 Manual de usuario

DTS

DTS DELTA 10 F Manual de usuario

ring

ring Solar Steplight Manual de usuario

One Stop Gardens

One Stop Gardens 57696 Instrucciones de montaje

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Manual de usuario

SIREM

SIREM Swimeo A2 Manual de usuario