Hensel POrty L600 Manual de usuario
CHARGE
CHECK
23
24
25
2627
28 30
31
32
33
34
1 2 3 4
5
6
22
7
8
20
21
19 18 17 16 15 14 13 12 11 10 9
29
F1 F2 F3 F4
F5
F6
F7
Strobe Wizard Plus / freemask
P1 P2 P3 P4
P5
P6
P7
P9 P8
P1 P2 P3 P4
Profoto Air Remote Profoto Air Sync
P12
P10
P11
P13
P14
User Manual Porty L
4
HENSEL-VISIT GmbH & Co. KG
HENSEL-VISIT GmbH & Co. KG
Robert-Bunsen-Str. 3
D-97076 Würzburg-Lengfeld
GERMANY
Phone: +49 931 27881-0
Fax: +49 931 27881-50
E-mail: [email protected]
Internet: http://www.hensel.de
© HENSEL-VISIT GmbH & Co. KG, 2012
Distribution and reproduction of this documentation is not
permitted unless specifically authorized. In case of violation,
payment of damages will be due. All rights reserved, including
rights created by patent grant, or registration of a utility model
or design (ISO 16016).
Subject to technical changes. Errors and omissions excepted.
The listed data are standard values and not to be regarded as
guaranteed values in a legal sense. Values can deviate depen-
ding on component tolerance.
980009.00
Effective date: 02/2012
User Manual Porty L
5
HENSEL-VISIT GmbH & Co. KG
1 Preface
Dear photographer,
By purchasing the battery flash generator Porty L, you have
selected a high-quality and high performance product.
Below, we want to give you some details and hints on how to
use this unit. These will ensure successful and productive work
with it in the coming years.
Observing this necessary information entitles you to warranty
adjustments, prevents damages, and extends the operational
life of the unit.
Hensel-Visit took great care and observed all pertinent regula-
tions on order to manufacture a safe product of highest quality.
Stringent quality checks ensure our high quality standard even
in large-scale production.
Please add your part and handle the equipment with the neces-
sary care.
If you have any questions regarding the use of this equipment,
feel free to call us any time.
We wish you great success and „good light.”
HENSEL-VISIT GmbH & Co. KG
User Manual Porty L
6
HENSEL-VISIT GmbH & Co. KG
2 Content
1 Preface............................................................................4
2 Content...........................................................................5
3 Safety instructions ............................................................7
4 General ........................................................................10
Description...............................................................10
Scope of delivery ......................................................10
5 Technical data ...............................................................11
6 Summary of control elements .........................................13
7 Initial use.......................................................................14
Acclimatization .........................................................14
Set-up .....................................................................14
Battery operation ......................................................16
The charger Porty Lithium..........................................16
Battery charge status indicator...................................19
Mains operation with AC Porty mains drawer..............21
Flash head connection ..............................................22
8 Operation .....................................................................25
ON/OFF switch ........................................................25
Synchronization ........................................................25
Modeling light ..........................................................28
Power adjustment .....................................................29
Test flash ..................................................................31
Audio.......................................................................31
Flash readiness.........................................................31
Daily flash counter....................................................32
User Manual Porty L
7
HENSEL-VISIT GmbH & Co. KG
USB Interface ...........................................................32
9 Operation with Strobe Wizard Plus..................................33
Summary of control elements ....................................33
Setting transmitter.....................................................33
Setting receiver .........................................................34
Output adjustment....................................................34
Switching the modeling light......................................35
10 Operation with freemask................................................36
Settings for freemask method ....................................36
11 Operation with Profoto Air..............................................38
Basic functions..........................................................38
Summary of control elements ....................................39
Preparing transmitter ................................................39
Remote trigger..........................................................40
12 Maintenance .................................................................43
Regular maintenance................................................43
Replacing fuse ..........................................................43
Error messages.........................................................44
Warranty..................................................................45
Disposal...................................................................45
13 Customer service points .................................................46
Manufacturer’s service ..............................................46
Service points listed in the Internet .............................46
14 Accessories....................................................................47
15 Subject index .................................................................48
16 Declaration of Confirmity ...............................................49
User Manual Porty L
8
HENSEL-VISIT GmbH & Co. KG
3 Safety instructions
In addition to the general rules for handling electrical equip-
ment, the following safety precautions must be observed.
Read and observe the below listed information before initial
operation of the equipment.
Supply a copy of the safety precautions when selling, leasing, or
otherwise distributing this equipment.
ATTENTION!
Improper handling of the device, non-compliance with the safety
hints below, or tampering with the safety features can cause
property damage, bodily injury, electric shock, or even death.
The rechargeable flash generator Porty L is intended for pro-
fessional use inside the studio. Its purpose is the supply of
electrical energy for specified types of flash heads. The flash
generator is to be used only with the accessories described in
this manual and approved by Hensel-Visit.
The Strobe Wizard Plus transmitter, the freemask transmitter
and Profoto Air are used for triggering flashes and adjusting
the flash output of Hensel-Visit flash units with built-in receiver
via radio signal.
The appliance may not be used for any other purpose than
described above, especially not for other electrical applications.
Set-up and initial operation
• Do not use flash units in explosive environments.
• Before connecting the AC mains drawer to the power sup-
ply, make sure that the mains voltage corresponds to the
specifications listed on the unit’s specification plate.
• The Porty with AC mains drawer must only be connected to
grounded power supply systems.
• Check the protective conductor function of the power supply
before initial use.
Normal Use
Abnormal use
User Manual Porty L
9
HENSEL-VISIT GmbH & Co. KG
• Only use plugs/connectors with flawless contacts. Burned or
corroded plug contacts can cause fires. Defective plugs can
cause substantial damage to the plug socket.
• Do not connect accessories from other manufacturers, even
when these look similar or alike.
• To prevent damages and tripping hazards, avoid laying
cables on the floor. If this is not possible, make sure that
the cables cannot be damaged by vehicles, ladders, etc.
• Damaged cables and housings need to be replaced imme-
diately by an authorized service department.
• Keep the minimum distance around the equipment unobst-
ructed to ensure proper ventilation.
• Do not place any objects on top of the equipment (coffee
cups, vases, containers filled with water, etc.).
• Choose safe locations for set-up and make sure that the
equipment cannot fall into pools or bodies of water.
• Keep proper distance from flammable materials like deco-
rative fabrics or paper to prevent the risk of fire.
• Secure the equipment with a back-up support when atta-
ching it to ceilings or pantographs. Use the device’s safety
features and secure the device additionally with a safety
rope. Suitable safety ropes can be purchased from Hensel-
Visit, see „14 Accessories“ on page 48.
User Manual Porty L
10
HENSEL-VISIT GmbH & Co. KG
Generators, compact flash units and flash heads
ATTENTION!
Defective flash tubes and false handling can pose a mortal
danger.
A damaged flash tube can mean mortal danger because you
could come in contact with the electrodes conducting high vol-
tage. Therefore, never touch exposed electrodes inside the flash
tube!
Before replacing flash tubes or modeling lights, the unit must
be switched off and disconnected from the power supply (when
using an AC mains drawer) or the generator. Even when the
unit is switched off and properly disconnected from the power
supply, the condensers could still be highly charged in case of a
malfunction. This means touching the device could pose a life-
threatening danger.
Halogen lamps and flash tubes may burst and must only be
operated with properly mounted Hensel safety dome.
ATTENTION!
Risk of death when coming in contact with the condenser volta-
ge.
Opening the housing and repairs of the unit must only be done
by an authorized customer service provider.
Working with the equipment
• Do not flash into eyes at short distances since this may lead
to eye damage.
• Do not look directly into the flash tube or the reflector. The
flash could be triggered accidentally.
• Regularly air closed rooms to prevent build-up of inadmissi-
ble ozone concentrations which can occur due to the use of
high-powered flash systems.
• Cover the equipment which is not in use with a proper dust
guard when working in a dusty environment.
Este manual sirve para los siguientes modelos
2
Tabla de contenidos
Otros manuales de Paquete de energía de Hensel
