HELVIA HMMA PLAY Series Manual de usuario
HMMA PLAY Series
Mini Digital Mixer Amplier with USB/FM/BT
Manuale d’uso
en-ita
Please read this manual carefully and keep it for future reference
Leggete questo manuale e conservatelo per future consultazioni
User Manual
Gentile Cliente,
Prima di tutto, grazie per aver acquistato un prodotto HELVIA®. La nostra missio-
ne e di orire soluzioni basate sulle tecnologie più aggiornate a tutte le esigenze
di integrazione di sistemi nei settori privati, commerciali e corporate.
Speriamo che siate soddisfatti da questo prodotto e, qualora vogliate partecipare,
saremmo molto lieti di poter ricevere il vostro feedback sul funzionamento del
prodotto e su possibili miglioramenti da apportare in futuro. Potete andare sulla
sezione CONTATTACI del sito www.frenexport.com e inviare una e-mail con la vo-
stra opinione; questo ci aiuterebbe a realizzare apparecchiature sempre più vicine
alle reali esigenze dei Clienti.
Vi preghiamo, inne, di leggere attentamente questo manuale di istruzioni prima
di utilizzare il prodotto; un uso incorretto potrebbe causare danni a voi e al pro-
dotto stesso: pensateci!
Il team HELVIA
Dear value Customer,
First, thank you for purchasing a HELVIA® product. Our mission is to oer
solutions based on the most up-to-date technologies for all systems integration
needs in the private, commercial and corporate sectors.
We hope you are satised with this product and, if you wish to participate, we
would be very pleased to receive your feedback on the operation of this product
and possible improvements for the future. You can go to “CONTACT” section of
www.frenexport.com and send an e-mail with your opinion; this would help us
make equipment that are closer to the real needs of our customers.
Finally, please read this user manual carefully before using the product; incorrect
use could cause damages to you and the product. Take care!
The HELVIA team
TABLE OF CONTENTS
1. PRECAUTIONS .................................................................................. 3
1.1. Important Safety Symbols.................................................................................................3
1.2. Important Safety Instructions ......................................................................................... 4
2. GETTING STARTED........................................................................... 5
2.1. Unpacking..............................................................................................................................5
2.2. First Start-Up .........................................................................................................................6
3. PRODUCT OVERVIEW ..................................................................... 6
3.1. Features: .................................................................................................................................7
4. INSTRUCTION....................................................................................7
4.1. Front Panel.............................................................................................................................7
4.2. Rear panel ..............................................................................................................................9
4.3. Side Panel............................................................................................................................. 11
4.4. Remote Control:................................................................................................................. 11
5. SPECIFICATIONS..............................................................................13
6. WARRANTY AND SERVICE ...........................................................14
7. WARNING.........................................................................................14
1. PRECAUTIONS
1.1. Important Safety Symbols
The above warning is located on the rear of the unit
HMMA PLAY Series Mini Digital Mixer Amplifier with USB/FM/BT
4
The lightening ash with arrowhead symbol within an equi-
lateral triangle is intended to alert the user to the presence of
uninsulated “dangerous voltage” within the product’s enclosure
that may be of sucient magnitude to constitute a risk of elec-
tric shock to persons.
The exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompa-
nying the product.
1.2. Important Safety Instructions
yRead these instructions
yKeep these instructions
yHeed all warning
yFollow all instructions
Water and Moisture
The apparatus should be protected from moisture and rain and can not be used
near water; for example near a bathtub, a kitchen sink, a swimming pool, etc.
Heat
The apparatus should be located away from heat sources such as radiators, stoves
or other appliances that produce heat.
Ventilation
Do not block areas of ventilation opening. Failure to do could result in re. Always
install according to the manufacturer’s instructions.
Object and Liquid Entry
Objects do not fall into and liquids are not spilled into the inside of the apparatus
for safety.
Power Cord and Plug
In case of external power cord, protect it from being walked on or pinched partic-
ularly at plugs, convenience receptacles, and the point where they exit from the
apparatus. Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two poles; a grounding-type plug has two poles and a
third grounding terminal. The third prong is provided for your safety. If the pro-
HMMA PLAY Series
Mini Digital Mixer Amplifier with USB/FM/BT
5
vided plug does not t into your outlet, refer to an electrician for replacement.
Power Supply
In case of products with external power adapter, the unit should be connected to
power adapters only of the type as marked on the apparatus or described in the
manual. Failure to do could result in damage to the product and possibly the user.
Unplug this apparatus during lightning storms or when unused for long periods.
Fuse
In case of products with external fuse holder, in order to prevent the risk of re
and damaging the unit, please use only of the recommended fuse type as de-
scribed in the manual. Before replacing the fuse, make sure the unit turned o
and disconnected from the AC outlet.
Noise and Interferences
Do not use the device in the nearby of a TV, radio, stereo equipment, mobile
phone, or other electric devices. Otherwise, the device, TV, or radio may generate
noise.
Electrical Connection
Improper electrical wiring may invalidate the product warranty.
Cleaning
Clean only with a dry cloth. Do not use any solvents such as benzene or alcohol.
Servicing
Do not implement any servicing other than those means described in the manual.
Refer all servicing to qualied service personnel only. Only use accessories/attach-
ments or parts recommended by the manufacturer.
2. GETTING STARTED
2 .1 . Unpacking
Thank you for purchasing your HMMA PLAY Mini Mixer Amplier. All units have
been rigorously tested before leaving the factory, This product is widely used in
schools, shops, bars, pubs, parks, parking lots, villas, and other places: it is the
ideal choice for public broadcasting. In order to facilitate your installation, com-
missioning and use of this product, please read this manual before installation.
HMMA PLAY Series Mini Digital Mixer Amplifier with USB/FM/BT
6
Carefully unpack the carton and check the contents to ensure that all parts are
present and in good conditions:
y1 x HMMA PLAY mini mixer amplier
y3x Phoenix Connectors (2x 2pin; 1x 4pin)
y1x FM Tuner Antenna Cable
y1 x Power Cord (only HMMA-30/120 PLAY)
y1x Remote Control
yThis User manual
If anything damaged during transport, notify the shipper immediately and keep
packing material for inspection. Again, please save its carton and all packing
materials. If the unit must be returned to the manufacturer, it is important that
the unit is returned in the original manufacturer’s packing. Please do not take any
action without rst contacting us.
Our products are subject to a continuous process of further development. There-
fore modications to the technical features remain subject to change without
further notice.
2.2. First Start-Up
When starting up the stereo amplier for the rst time, please proceed as follows:
1. Turn down the master volume.
2. Turn down the volume of each source.
3. Connect the amplier to a microphone and/or other AUX source.
4. Turn on ON/OFF switch. The power indicator will light.
5. Adjust the master volume to the optimal level.
6. Adjust the Master Volume at half level, and gradually increase the input level
related to connected source (MIC1, MIC2/AUX2, AUX1) until you reach the de-
sired volume. If you need to change the wiring or installation, make sure to to
decrease master volume to minimum and disconnect power cord rst.
3. PRODUCT OVERVIEW
HMMA PLAY series is designed for all those PA applications where space is quite
zero. In half 19” Rack Unit there is a Class-D amplier with powers ranging from
35W to 120W (70-100V or 4-16ohm outputs), a USB/BT/FM Radio with Remote
Control, and a mixer for the control of the individual audio sources and the mas-
ter. It is also possible to connect these ampliers to your alarm system and power
a 24V in the event of a re prevention system. Really the perfect solution for small
business premises.
HMMA PLAY Series
Mini Digital Mixer Amplifier with USB/FM/BT
7
3.1 . Features:
yCompact design, Half 19” Rack Unit Size
y100V-70V & 4-16 ohm Speaker Output
yRated powers ranging from 35W to 120W
yBuilt-in USB Player, FM Radio & BT Streaming with remote controller
y2 MIC inputs (MIC1 with 6.3mm Jack; MIC2 with 2 XLR and Phantom)
y1 EMC input, 2 Line Inputs, 1 Line Output.
yHigh-Performance Class-D amplier with Switching Power Supply
yIndividual Volume control for Mic 1-2, Line 1-2, MP3/FM/BT
yBass/Treble and Master Volume Control
yDC24V Auxiliary Power Input
4. INSTRUCTION
4.1. Front Panel
MODE
MIC1
MIC1
Priority MIC2/AUX2 AUX1 TREBLE
BASS MASTER
ON
OFF
POWER
PROT
8
6
4
2
USB
USB/BT/TUNER DISPLAY
0 10 0 10 0 10 0 10
+10-10
0
+10-10
0
HMMA-120 PLAY
120W Mini Mixer Amplifier
1
8 9 10 11 12 13 14 15
2 3456
7
1. Display Screen
It shows all information about operative modes, tuner stations, BT, and USB play-
ing status.
2. USB Interface
Insert here your USB-Drive (FAT32 format –32GB Max) with your favorite MP3 play
lists.
3. Play / Pause (Station Storing in FM Mode)
In USB and BT mode, this button pauses & plays current song. In FM mode, it
searches radio stations automatically. Maximum preset number is 99, but nal
HMMA PLAY Series Mini Digital Mixer Amplifier with USB/FM/BT
8
result depends on stations active in your place.
4. Last Song (Last Station Recall in FM Mode)
In USB and BT mode, press this button to switch to last song in the directory. In
FM mode, press this key to switch to previous stored station in the list.
In FM/BT/USB mode, long press this button to turn down player volume. It ranges
from 32 to 0.
5. Next Song (Next Station Recall in FM Mode)
n USB and BT mode, press this button to switch to next song in the directory. In
FM mode, press this key to switch to next stored station in the list.
In FM/BT/USB mode, long press this button to turn up player volume. It ranges
from 0 to 32.
6. Mode Selection
Press this button to select AUX, BT, and Tuner mode.
7. MIC1 Input
This 1/4” (6,3mm) input connector has priority on all other sources (MIC1, MIC2/
AUX2, AUX1, BT, USB, Tuner).
8. MIC1 Volume
This knob adjusts MIC1 volume.
9. MIC2/AUX2 Volume
It adjusts MIC2/AUX2 volume.
10. AUX1 Volume
It adjusts AUX1 volume.
11. Bass Level
Turn counter clockwise to decrease Bass tone level; turn clockwise to increase it.
12. Treble Level
Turn counter clockwise to decrease High tone level; turn clockwise to increase it.
13. Master Volume
This knob adjusts the level of all signals (except EMC).
HMMA PLAY Series
Mini Digital Mixer Amplifier with USB/FM/BT
9
14. Power Switch
Press “ON” to turn the unit on; press “OFF” to turn power o.
15. LED Bar
This bar combines three information:
yPOWER - Is lit when the unit on;
yPROT - When this LED is on, indicates that the amplier is in overload state;.
Please reduce Master volume or adjust single audio source levels in order to
keep this LED o.
yLEDs from 2 to 8 - These bar shows the audio output level.
4.2. Rear panel
AMPLIFIER OUT
24V/4A
- +
DC IN
AUX OUT AUX1 IN MIC2 IN
MIC2 PHANTOM
AUX2
+48V
VOL
-+
AUX2 IN
COM 100V70V
4-16Ω
EMC IN
VOL
-+
350mV
100V
FM ANT
-
+
~220V/50-60Hz/4A
MADE IN CHINA
1
8 9 10 11 12 13 14
2
3 4 5 6 7
1. Power input
Connect the IEC/Schuko power cord here (only for HMMA-30 PLAY and HMMA-
120 PLAY). Please be sure your mains is AC~110-240V 50/60Hz before connecting
this amplier.
2. Tuner Antenna
Connect here the radio antenna.
3. DC-24V Power Input
In case of EVAC or alarm systems, it could be requested to connect this amplier
to auxiliary DC 24V power. Pay attention to respect correct polarity.
4. Audio Power Output
Connect this 4-pin Phoenix connector to your speaker system. Use dierent
constant voltage levels, and low-impedance output according to your speaker
system. Follow this table for your reference (from left to right):
HMMA PLAY Series Mini Digital Mixer Amplifier with USB/FM/BT
10
PIN1 COM
PIN2 4ohm-16ohm
PIN3 70V
PIN4 100V
5. AUX Output
Use this stereo line RCA pair to connect your HMMA PLAY amplier to other au-
dio systems, mixers or recording equipment.
6. AUX1 Input
Use this stereo line RCA pair to connect other sources to your HMMA PLAY ampli-
er (e.g. CD-players, mixers, DVD-players, etc.)
7. AUX2 Input
Like AUX1, use this stereo line RCA pair to connect other sources (e.g. CD-players,
mixers, DVD-players, etc.)
8. AUX2/MIC2/Phantom Switch
This selector has 3 positions: AUX2, MIC2, PHANTOM. In AUX2 position, this
channel routes to MIC2/AUX2 knob the stereo signal from AUX2 input; when in
MIC2 position, it routes the signal from XLR connector MIC2 to the MIC2/AUX2
knob; when in PHANTOM position, it keeps MIC2 to MIC2/AUX2 knob and acti-
vates +48V phantom power. This is required in case of condenser microphones
with balanced cable (3-pin XLR connector).
9. Indicator of 48V phantom power
When on, this LED indicates that Phantom Power is active on MIC2 connector.
NOTE: Never use Phantom Power in case of dynamic microphones or
other audio sources that do not require phantom power.
10. MIC2 Balanced Input
This 3-pin XLR connector is used to connect dynamic or condenser microphones.
In case of condenser capsules, please remember to select PHANTOM mode on
switch n. 8.
11. AUX2/MIC2 Gain
This trimmer adjusts input gain. Before connecting an audio source to MIC2 XLR
outlet, please turn it anti-clockwise to minimum lever; then connect the source,
put MIC2/AUX2 to half level, and adjusts this gain trimmer at half - 3/4 level. Do
Este manual sirve para los siguientes modelos
3
Tabla de contenidos
Idiomas:
Otros manuales de Amplificador de HELVIA
HELVIA
HELVIA HWA-40 PLAY Manual de usuario
HELVIA
HELVIA ZEUS X Series Manual de usuario
HELVIA
HELVIA HPMA Series Manual de usuario
HELVIA
HELVIA ZEUS CA Series Manual de usuario
HELVIA
HELVIA HSMA PLAY Series Manual de usuario
HELVIA
HELVIA HTMA TOUCH Series Manual de usuario
HELVIA
HELVIA HCA-60 PLAY Manual de usuario
HELVIA
HELVIA HCA-40 PLAY Manual de usuario
HELVIA
HELVIA HRMA PLAY Series Manual de usuario
HELVIA
HELVIA HRMA-1206C Manual de usuario
