Heatmiser PRT-EWTS Manual de usuario

Model: PRT-EWTS

Wireless Series

3-4

5-6

7-8

9-10

13-14

Product Image

Table of Contents

What is a Programmable Room

Thermostat?

Installation Procedure

LCD Display

Pairing the Thermostat

Setting the Clock

Temperature Display

Comfort Levels Explained

Clean Screen

Locking the Keypad

Temperature Control

21-22

27-28

Temperature Hold

Holiday Programming

Frost Protection

Heating ON/OFF

Optional Features Explained

Adjusting the Optional Settings

Optional Settings - Features Table

Re-calibrating the Thermostat

Factory Reset

Battery Recharging

Error Codes

Notes

Model: PRT-EWTS

Table Of Contents

Wireless Series Model: PRT-EWTS

What is a Programmable Room Thermostat?

The way to set and use your programmable room thermostat is to nd the lowest

temperature settings that you are comfortable with at the dierent times you have

chosen, and then leave it alone to do its job.

The best way to do this is to set the room thermostat to a low temperature

– say 18°C , and then turn it up by 1°C each day until you are comfortable with the

temperature. You won’t have to adjust the thermostat further. Any adjustment above

this setting will waste energy and cost you more money.

You are able to temporarily adjust the heating program by overriding or using the

temperature hold feature. These features are explained further on pages 15 and 16

of this manual.

Programmable room thermostats need a free ow of air to sense the temperature,

so they must not be covered by curtains or blocked by furniture. Nearby electric

res, televisions, wall or table lamps may also prevent the thermostat from working

properly.

A programmable room thermostat is both a programmer and a room thermostat.

A programmer allows you to set “On” and “O” periods to suit your own lifestyle.

A room thermostat works by sensing the air temperature, switching on the heating when

the air temperature falls below the thermostat setting, and switching it o once this set

temperature has been reached.

So a programmable room thermostat lets you choose what times you want the heating

to be on, and what temperature it should reach while it is on. It will allow you to select

dierent temperatures in your home at dierent times of the day (and days of the week)

to meet your particular needs and preferences.

Setting a programmable room thermostat to a higher temperature will not make the

room heat up any faster. How quickly the room heats up depends on the design and size

of the oor heating system.

Similarly reducing the temperature setting does not aect how quickly the room cools

down. Setting a programmable room thermostat to a lower temperature will result in the

room being controlled at a lower temperature, and saves energy.

1 2

A B

Installation Procedure

Wall Mounting:

Step 1

Fix the wall plate to the wall.

Step 2

Push the thermostat onto the wall plate.

Desk Stand:

Step A

Remove the thermostat from the wall plate.

Step B

Release the desk stand.

Mount the thermostat at eye level.

Read the instructions fully so you get the best from our product.

Don’t

Do not push hard on the LCD screen as this may cause irreparable damage.

Do not install near to a direct heat source as this will aect functionality.

If using the desk stand, ensure the thermostat is away from heat sources.

Wireless Series Model: PRT-EWTS

32 5

1. Day Indicator - Displays the day.

2. Holiday Indicator - Displayed when the programmer is in Holiday mode.

3. Temperature Hold - Displayed when the programmer is in Hold mode.

4. Clock - Displays time in normal operation, time left in hold or days left in

holiday mode.

5. Up/Down Keys - Increase or decrease values shown on top digit group.

6. Flame Icon - Displayed when the heating is ON and ashes when the

Optimum Start function is in operation.

7. Keypad Lock Icon - Displayed when the keypad is locked.

8. RF Icon - Flashes when the thermostat communicates with the receiver.

Frost Icon (Heating O) - Displayed when the heating is switched o and system

is protecting against frost only.

10. Floor Temp Achieved Icon - Displayed when the oor set temperature is reached.

11. Battery Icon - Indicates current battery charge level.

12. Room Temp - Indicates the current temperature sensor mode.

13. Set - Indicates when changes are being made to programs or temperature points.

14. Clean Screen - Freezes screen temporarily to enable cleaning.

15. Up/Down Keys - Increase of decrease values shown on bottom digit group.

16.

Power: Single press to enable/disable frost protection or press and hold to turn

o display. Cancel: used to exit setup/program operations.

17. Setup/Programming Keys - Used to navigate setup options.

18. View Floor Temperature Key - Used to change display to show oor temperature.

19. Current Temp - Indicates the current sensor temperature.

20. Units of Temperature - Degrees Celsius or Fahrenheit.

21. Comfort Level Selection Keys - Used in comfort level setup (see page 13-14).

LCD Display

Pair Successful

The Comms LED on the receiver should ash and then go out to indicate

the pair is successful. The thermostat will display the communication icon.

Pair Fail

If the Comms LED does not ash there is a problem with the RF signal and

you should reduce the distance between the thermostat and receiver.

Where possible ensure there are no metal objects blocking the signal.

The LED will automatically go out after 1 minute.

To pair the thermostat with the RC2-WTS receiver, follow these steps.

On the receiver;

Press the Pair button once.

The Communication LED will light up.

On the thermostat;

• Press PROG and then SETUP ...................................................................................

• At the top of the LCD, you will see 01.

• Use the Up key to select 05 and enter the pairing function .....................................

• In the centre of the LCD, you will see 01. This is the channel address.

The default setting of 01 can be used in most cases, but should be changed when

a conict is detected with other RF devices.

• Use the Up/Down keys to enter the address ......................................................

• Press SETUP to Pair the thermostat and receiver ........................................................

Note: You must nish pairing the thermostat before the communication LED goes out.

Pairing the Thermostat

Comms LED

109

Wireless Series Model: PRT-EWTS

Room Temperature SET Temperature

Temperature Display

This is the current room temperature. This is the temperature you are trying to

achieve in your home.

The temperature display information is driven by two dierent inputs; the sensor

measurement and the target temperature you have set.

When the thermostat is in air and oor sensing mode, the thermostat will display a

FLOOR button. Pressing this allows you to view the current oor temperature, the

thermostat automatically reverts back to ROOM TEMP after 5 seconds.

To set the clock, follow these steps.

• Press PROG ................................................................................................................

• Press CLOCK ..............................................................................................................

• Use the Down key to set the hours ..................................................................

• Use the Up key to set the minutes ...................................................................

• Use the Day key to set the day of the week ..................................................

• Press DONE to conrm and exit ........................................................................

Setting the Clock

Hours

Change Hours

Minutes

Day

Change Minutes

1211

Wireless Series Model: PRT-EWTS

1413

Wireless Series Model: PRT-EWTS

• Press PROG .......................................................................................................

• Select WAKE .....................................................................................................

• Use the Up/Down keys to set the time for WAKE period ...............

• Use the Up/Down keys to set the temperature .................................

• Repeat these steps for the LEAVE, RETURN & SLEEP periods ........

• Press DAY to select the next day to program and repeat ...............

• When complete, press DONE to conrm settings and exit ............

In 5/2 Day mode the thermostat will display

“Sat Sun” prompting you to program the

temperature levels for the weekend.

In 7 Day mode, the thermostat will

display Tue.

Comfort levels allow you to set dierent temperatures throughout the day. For example,

you may want the home warm in the morning when you are getting ready for work,

cooler during the day when the house is unoccupied and then warmer in the evening

when you are home relaxing.

The thermostat oers 2 programming options:

5/2 Day Programming - 4 levels for the weekdays and 4 dierent levels for the weekend.

7 Day Programming - 4 levels for each day.

See pages 23-24 for details on how to switch between these modes.

Tip! If you don’t want to use all of the comfort levels, just set the time to --.--

Default comfort levels are pre-programmed but you can change them easily.

Weekday Level Time Temp

Wake 07:00 21°C

Leave 09:00 16°C

Return 16:00 21°C

Sleep 22:00 16°C

Weekend Level Time Temp

Wake 09:00 21°C

Leave 22:00 16°C

Return --,-- --°C

Sleep --,-- --°C

Comfort Levels Explained

1615

Wireless Series Model: PRT-EWTS

Note: This new temperature is maintained only until the next programmed comfort level.

At this time, the thermostat will revert back to the programmed levels.

Keypad Lock Indicator

Set Temperature

Set Icon

Locking the Keypad

The thermostat has a keypad lock facility.

• To activate the lock press the bottom right corner of the display and hold for 10 secs.

• When activated, you will see the Keypad Lock symbol.

• To cancel, press the bottom right corner of the display again for 10 secs.

Clean Screen

Pressing will disable all keys, providing you 15 seconds to wipe the screen

clean before the keys are re-activated.

The keys under the temperature display allow you to adjust the

set temperature.

When you press either of these keys, you will see the temperature and

the word SET appear on screen.

Select the desired temperature and press to conrm and exit.

Temperature Control

1817

Wireless Series Model: PRT-EWTS

The temperature hold function allows you to manually override the current

operating program and set a dierent temperature for a desired period.

• Press HOLD .........................................................................................................................

• Use the top set of Up/Down keys set the hold period .......................................

• Use the center set of Up/Down keys to set the hold temperature ................

• Press DONE to conrm and exit .................................................................................

To cancel a temperature hold, follow the same steps but reduce the time to 00:00.

Temperature Hold

Hold Icon

Hold Time

Hold Temperature

The holiday function reduces the set temperature in your home to the frost protection

temperature setting (see page 21).

The thermostat will maintain this temperature for the duration of the holiday and will

then automatically return to the program mode on your return.

• Press HOLIDAY ..............................................................................................

• Enter the desired duration in days ........................................................

• Press DONE to conrm settings and exit ............................................

Note: A holiday period does not

start until 00:00 the next day.

For example, if you set a holiday

period on Friday for

2 days, Saturday will be counted

as the rst day and the

thermostat will revert back to

the programmed schedule at

00:00 on Monday.

To cancel a Holiday setting,

reduce the holiday time to

00 days.

Holiday

Holiday Icon

Holiday Days

Tabla de contenidos

Otros manuales de Termostato de Heatmiser

Heatmiser

Heatmiser Slimline-RF Manual de usuario

Heatmiser

Heatmiser PRT-W1 Manual de usuario

Heatmiser

Heatmiser TM1-TS WiFi RF Manual de usuario

Heatmiser

Heatmiser NetMonitor V3 Manual de operación

Heatmiser

Heatmiser Touchpad (TFT) Manual de usuario

Heatmiser

Heatmiser Touch-HWN Manual de usuario

Heatmiser

Heatmiser Touch Manual de usuario

Heatmiser

Heatmiser PRT-UWTS Manual de usuario

Heatmiser

Heatmiser NeoAir V2-M Manual de usuario

Heatmiser

Heatmiser TM4-TS Manual de usuario

Heatmiser

Heatmiser neoStat Manual de usuario

Heatmiser

Heatmiser PRT-E Manual de usuario

Heatmiser

Heatmiser smartstat Manual de usuario

Heatmiser

Heatmiser Touch Series Manual de usuario

Heatmiser

Heatmiser DT-ETS WiFi RF Manual de usuario

Heatmiser

Heatmiser PRT-EAU1 Manual de usuario

Heatmiser

Heatmiser DS1-EL Manual de usuario

Heatmiser

Heatmiser neoStat-hw V2 Manual de usuario

Heatmiser

Heatmiser DT Manual de usuario

Heatmiser

Heatmiser PRT-EN1 Slimline Series Manual de usuario

Heatmiser

Heatmiser PRT-B Manual de usuario

Heatmiser

Heatmiser Touch Series Manual de usuario

Heatmiser

Heatmiser PRT-WTS Manual de usuario

Heatmiser

Heatmiser neoAir Manual de usuario

Manuales populares de Termostato de otras marcas

EWELLY

EWELLY EW-181 Manual de usuario

Prolon

Prolon T1100 Instrucciones de instalación

Computherm

Computherm Q20 Manual de usuario

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA Manual de usuario

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Manual de usuario

Saswell

Saswell SAS920XWHB-7-S-RF Guía

Aircalo

Aircalo TFP1-ET85P2 Manual de usuario

Honeywell

Honeywell CM721 Manual de usuario

Carrier

Carrier DEBONAIR 33CS Manual de usuario

Lennox

Lennox iHarmony Zone Thermostat Instrucciones de montaje

Gemtech

Gemtech GT7000 Manual de instrucciones

Rollei

Rollei Smartes 45000 Manual de usuario

Sinope

Sinope TH1300RF Manual de usuario

Honeywell

Honeywell RLV4305 Manual de usuario

Honeywell

Honeywell Prestige 2.0 THX9421 Manual de usuario

NuTone

NuTone NTBZ48 Instrucciones de funcionamiento originales

Stelpro

Stelpro MAESTRO ASMT402AD Manual de usuario

Honeywell

Honeywell T6811 Manual de usuario