HearingAble IRIS20 Manual de usuario
USER MANUAL
v1.10
Introduction
Features
Technical Specications
Preparation
- Conguration
- Ear Dome
- Battery
- How to Wear
Application Program
- How to install
- How to use
Precaution to Use
- Hearing Test
- Change the environment mode and
sound volume in the application program
- How to Adapt
Maintenance
- Maintenance method
- Cleaning method
- Battery management
- Operating condition
- Notices
- Troubleshooting guidelines
Warranty
- Warranty description
- Customer Service
Appendix
- Origin
- Certication
2
3
4
5
6
7
8
11
12
13
14
15
16
1
Contents
The technical specication of this
product can be changed without prior notice
2
Introduction
Thank you for purchasing our product, HearingAble IRIS20. IRIS20 is a personal sound amplier that
measures the hearing of the user and amplies the surrounding sound properly through automatic
tting by using the Bluetooth wireless technology of smartphone.
Purpose
This product is a hearing electronic device that amplies the surrounding sound, It helps the hearing
ability of user who lost his hearing.
Notice
For patients with middle ear infection, the use of this product can be limited . Please discuss with a
doctor before using. Regarding to the hearing of user, please consult with your specialist.
Scope
This user manual applies only to HearingAble IRIS20. *Some model names can be changed.
Introduction
3
Features
Speaker
Wax Filter
Battery Door
Tube
Mic.
Ear Dome
Bluetooth Version
Number of Channels
Max Output
Average Gain
Available Hearing Level
Battery Type
Battery Life
Weight
Color
Self Hearing Test (with App)
Mode (with App)
Volume (with App)
Power Control (with App)
Android Version
iOS Version
Ver. 4.1 Low Energy
20 ch (WDRC)
108 dB @ 300Hz
40 dB
Mild to Moderately Severe
IRIS20 Uses 312 Zinc Air Battery
90~130 hours
2.2 g
White / Gray
Yes
4 Types (Normal, Restaurant/Subway, Watching TV, Driving)
3 Steps (Low, Normal, High)
Yes
OS 4.4 or Later
OS 7.0 or Later / iPhone 4s or Later
4
Technical Specications
Conguration
Ear Dome
Battery
IRIS 20 1 each, Manual, Cleaning tool,
Ear Dome 2 each(Semi-closed),
2 each(Closed), Warranty card.
IRIS 20 uses 312 zinc air battry.
How to change the battery
1. Open the battery case and remove the used battery.
2. Remove the sticker of new battery and wait for about 1 minute.
3. After inserting new battery, check whether the positive (+) terminal has been inserted correctly.
4. Close the battery case.
Attached to the product
The ear dome protects the ear to avoid the strain when wearing the product
and prevents the weakening output due to the wax.
5
Preparation
6
How to Wear
Order of Wearing
*Note : Do not insert the product inside
the ear without attaching the ear dome.
Clean the ear of user before wearing and check if the battery case is closed.
Step 1: Insert the speaker of product to the most comfortable position gently.
Step 2: Span the other part of product inside the ear ap.
Step 3: Push the speaker inside the ear at maximum.
(The accurate function shall be guaranteed when the speaker is worn deep inside the ear.)
Preparation
How to install
7
Contents
1. Android Phone
Available for installation/use only for smartphones with OS Ver.4.4
or later. Search“hearingable”at the Google Play Store installed
in the smartphone.
2. iPhone
Available for installation for iPhones with iOS Ver.7.0 or later and
iPhone 4S or later. Search“hearingable”at the App Store
installed in the iPhone. Install according to the guideline.
8
Application Program
this is the preparation screen to register the product
on application program.
- Press [Yes] to register the product.
- If you press [No], only some of the functions will be
available for use.
this is the search screen to register the product on
application program.
- Use the following method to search the product.
1) Check if Bluetooth is ON.
2) Open the battery case and insert the battery, and
close it again.
3) Press [SCAN] to search the device.
9
The product registration has
been completed.
- Press [Yes] to register other direction
production additionally or press [No]
to go next step.
- After completion of product
registration, go to the hearing test.
Direction of product to conduct
the hearing test.
- Select (Left/Right) and press [START]
to conduct the hearing test.
Notices for hearing test
1) The hearing test should be
conducted in a silent place.
2) The required time for hearing test
is about 3 minutes.
Application Program
Tabla de contenidos
