Preset PEMF Programs
POWER ON/OFF
PHOTON Light ON/OFF
PEMF ON/OFF Decrease PEMF Settings
PEMF Mode change Increase PEMF Settings
HEAT ON/OFF Decrease HEAT Settings
HEAT Mode change Increase HEAT Settings
SLEEP Cycle
Advanced PEMF Programming
PHOTON SETTINGS
3
PEMF
FIR
188
188
188
88
1 8:8 8
SETPOINT TEMP
HOURS ON
NI
°F
°C
ACTUAL TEMP
PROGRAM
MIN/HR
Pulse
Sleep
WAVE
TYPE
PROGRAM
ABCD
PROGRAM
ABCD
PROGRAM
ABCD
PROGRAM
ABCD
FREQ
HERTZ
PULSE
DURATION UFM
%
HZ
A
C
BD
PHOTON PHOTON LIGHT
ON and OFF
Photon lights turn OFF automatically after 1 hour.
Photon lights can be turned ON again at any time.
Lights operate with or without heat.
Intensity of photon light is 2.5 mW/ cm2
Wavelength of photon light is 660 nm
Information
i
Program
Button
Program Type
Default Frequencies,
in ABCD, Hz
F1
Low Frequencies 1, 3, 4, 6
F2
Medium Low Frequencies 7, 8, 10,12
F3
Medium Frequencies 14, 15, 17, 18
F4
High Frequencies 19, 21, 23, 25
F5
Before Sleep 5, 4, 3, 2
F6
Pain Assist 15, 16, 19, 20
F7
Sports Injury & Strain Assist
24, 24, 25, 25
F8
General Regeneration 7.83, 7.83, 10, 10
F9
Earth Frequencies 7.83, 14, 21, 25
F10
Wake Up/Energy 7.83, 10, 11, 12
F11
Energize
Sequence
: F10, F8, F6
F12
Relaxation
Sequence
: F9, F8, F5
Table 1 - Factory preset PEMF functions description
INSPIRED BY NATURE, PERFECTED BY SCIENCE. 3
PEMF
Pulsed Electro-Magnetic Field
Each preprogrammed PEMF function F1-F10 consists
of 4 programs (ABCD). Each ABCD program is 5 min
long and has a unique combination of PEMF Wave
Type, Frequency, Pulse duration, and Intensity.
PEMF function can be changed at any time by pressing
dierent F-button. Active ABCD program will restart
according to the chosen Function.
Functions F1 - F10 can be customized or reset to the
factory settings at any time (see page 4).
Information
i
PREPROGRAMMED PEMF FUNCTIONS
5
Flashing arrow indicates active
programs A, B, C or D.
PROGRAM
A
C
BD
188
88
1 8:8 8
SETPOINT TEMP
HOURS ON
NI
°F
°C
ACTUAL TEMP
PROGRAM
Pulse
Sleep
PROGRAM
ABCD
PROGRAM
ABCD
PROGRAM
ABCD
UFM
HZ
A
C
BD
Negative Ion icon is lit when the heat
is on.
Pulse
Sleep
“Pulse” displayed when PEMF is active.
“Sleep” displayed when PEMF is
non-active during 100 min OFF time.
PEMF
PROGRAM F11
1 HR ENERGIZE
EASY PEMF MODE
Functions will run in sequence: F10 - F8 - F6 (see Table 1).
Controller will shut o after 1 hour. The program is not customizable.
1 HR RELAXATION
EASY PEMF MODE Controller will shut o after 1 hour. The program is not customizable.
Functions will run in sequence, F9 - F8 - F5 (see Table 1).
F12
PEMF
PROGRAM
PEMF
PROGRAM F10
F1 ... PEMF settings of the active program will be displayed on
the screen.
20 MIN PEMF
PICK from TABLE 1
