HDTV Supply Sewell Spider MX0402-321 Manual de usuario

Model No.: MX0402-321

Operating Instructions

Thanks for purchasing our product.

Please be sure to read this instruction manual

Carefully before using our product.

Introduction

The Sewell Spider is a 4-by-2 HDMI true matrix. It allows any source (Blue-Ray

player, HD DVD player, satellite receiver, game system, etc.) to be shown on

the any of the two displays simultaneously, no matter the source is HDCP or

not. Extra infrared receiver extension and IR emitter can control HDMI source

and HDMI MATRIX.

This unit has the ability of equalization and amplification to ensure HDMI

signal's transmission through long cable without quality loss.

The matrix offers solutions for digital entertainment center, HDTV retail and

show site, HDTV, STB, DVD and projector factory, noise, space and security

concerns, data center control, information distribution, conference room

presentation, school and corporate training environments.

Contents

HDMI Matrix.....................................................................................................1

Product Overview ............................................................................................1

Features...........................................................................................................1

Package Contents ...........................................................................................3

Specifications...................................................................................................3

Panel Descriptions...........................................................................................4

Front Panel......................................................................................................4

Rear Panel.......................................................................................................4

Side Panel .......................................................................................................5

Installation........................................................................................................5

Operation.........................................................................................................6

1 | P a g e

HDMI Matrix

■Product Overview

■Features

Easy to use: install in seconds, no need for setting.

Allows up to four HDMI source devices to be independently switched to

two HDMI monitors, HDTVs, or projectors.

The two outputs could show the same or different source at the same time

no matter the source is HDCP or not.

Support high definition resolutions 1080P, 1080i, 720P and standard video

format.

Three switching modes：panel buttons, local IR, IR extension.

With extra infrared receiver extension and IR emitter extension for IR call

back function to control the HDMI source or HDMI MATRIX from remote

rooms.

HDCP compliant.

HDMI 1.4.

2 | P a g e

Warning

To reduce the risk of fire, electric shock or product damage:

1. Do not expose this apparatus

to rain, moisture, dripping or

splashing and that no objects

filled with liquids, such as vases,

shall be placed on the apparatus.

6. Clean this apparatus

only with dry cloth.

2. Do not install or place this unit

in a bookcase, built-in cabinet or

in another confined space.

Ensure the unit is well ventilated.

3. To prevent risk of electric

shock or fire hazard due to

overheating, do not obstruct

the unit’s ventilation openings

with newspapers, tablecloths,

curtains, and similar items.

4. Do not install near any heat

sources such as radiators, heat

registers, stoves, or other

apparatus (including amplifiers)

that produce heat.

5. Do not place sources of naked

flames, such as lighted candles,

on the unit.

7. Unplug this apparatus

during lightning storms or

when unused for long

periods of time.

8. Protect the power cord

from being walked on or

pinched particularly at

plugs.

9. Only use attachments /

accessories specified by

the manufacturer.

10. Refer all servicing to

qualified service

personnel.

3 | P a g e

■Package Contents

①Main unit.

②5VDC Power Supply.

③1x Remote.

④2x IR_RX (IR receiver) extension cable.

⑤4x IR_TX (IR emitter) extension cable.

⑥2x IR_RX cable extender jack pair.

⑦Operating Instructions

⑧2x Mounting Ear.

■Specifications

Operating Temperature Range

-5 to +35°C(-41 to +95 °F)

Operating Humidity Range

5 to 90 % RH (no condensation)

Input Video Signal

0.5-1.0 volts p-p

Input DDC Signal

5 volts p-p (TTL)

Signaling Rate

2.25Gbit/s

Video Format Supported

DTV/HDTV:

1080P/1080i/720P/576P/480P/576i/480i

Output Video

HDMI1.2 and HDMI 1.4

Audio Format Supported

DTS-HD、Dolby trueHD

Maximum Transmission Distance

<15m (If needed, HDMI extender is

optional)

Power Consumption

10wtts (Max.)

Dimensions

204mmL×95mmW×29mmH/8.0''L×3.7''

W×1.1''H

Mass (Main Unit)

0.45kg

4 | P a g e

■Panel Descriptions

Front Panel

①IR receiver.

②Indicator of inputs (2 color LED, RED for Output1, BLUE for Output 2).

③Input select button for Output 1.

④Input select button for Output 2.

⑤IR extension transmitter sockets.

⑥Power switch.

Rear Panel

①Mini USB for firmware update.

②Power input.

③IR extension receiver sockets.

④HDMI output 1.

⑤HDMI inputs.

⑥HDMI output 2.

5 | P a g e

Side Panel

DIP switch for EDID setting.

■Installation

1) Connect the HDMI input sources ( such as HD-DVD, PS3, STB etc)

into the matrix.

2) Connect the HDMI outputs ( such as HD-LCD, HD-DLP) into the

matrix.

3) Power on the input source you want to show. ( Keep the unused input

power off, otherwise it may interfere the normal display.)

4) Connect the power supply into matrix and turn on the display you want to

watch.

5) Use remote or push the button to choose input source. Extra infrared

receiver extension and IR emitter are supplied for remote control.

6) IR call back from remote rooms to control the HDMI Matrix function.

Attention: Insert / Extract cables gently.

6 | P a g e

■Operation

1. Front panel control.

The MX0402-321 front panel to select inputs to the various outputs.

2. Local IR remote control.

User can control the HDMI route of the

matrix by using the IR remote.

There are two group key pads for two

output ports. For each output port source

selection, there are 4 number keys and two

arrow keys. Press number keys to select

specific input port. Left arrow button to

backward the input port, and right arrow to

forward input port.

Tabla de contenidos

Otros manuales de Cambiar de HDTV Supply

HDTV Supply

HDTV Supply HDTVMT0808140 Manual de usuario

HDTV Supply

HDTV Supply HDTVHDS941A Manual de usuario

HDTV Supply

HDTV Supply HDTVCV0702HDS Manual de usuario

HDTV Supply

HDTV Supply MT0404-NA2 Manual de usuario

HDTV Supply

HDTV Supply Colorado Manual de usuario

HDTV Supply

HDTV Supply HDMI Matrix Manual de usuario

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario