6
MHUB MAX
MHUB MAX
HD CONNECTIVITY L
TD, trading as HDANYWHERE registered in England and Wales. Company No: 06046737 Registered ofce: Unit 23 Link Business Centre, Link Way, Malvern, Worcestershire, WR14 1UQ. Contact:
[email protected] Tel: 00441684575324
BEFORE STARTING: Read and agree to the End User Licence Agreement (EULA) and Privacy
Statement
First Boot Step 1 – Check for MOS updates
This is where your MHUB requests available updates from HDA cloud so your unit will update to
the latest version. This is done before proceeding.
First Boot Step 2 – Name your MHUB
Here you can give your MHUB a personal name, this can also be used to differentiate multiple
installations by HDA Pro’s
First Boot Step 3 – Name your sources/inputs
On this page you can label your input devices, such as Sky, Apple or Tivo. These labels are used
in the uControl app and with voice control.
SETUP CONTINUED...
1. Power off all displays and all HDMI source devices.
2. Connect the unpowered HDMI sources to the HDMI inputs on the matrix hub using suitably
robust HDMI cabling options (i.e. guaranteed to support 18Gbps bandwidth).
3. Connect each display such as a HDTV or Projector to the HDMI output ports on the matrix
hub using suitably robust HDMI cabling options (i.e. guaranteed to support 18Gbps bandwidth).
4. Plug in the power for the matrix hub.
5. Power on each HDMI source device followed by each display.
6. At this point the four displays should show the video and audio of the HDMI source devices
connected to the matrix.
MHUB-OS FIRST BOOT PROCESS
Make sure MHUB is connected up correctly before starting the rst boot process on MHUB-OS
HDANYWHERE(HDA) recommends that every MHUB install goes through its rst boot process
to ensure that the MHUB is setup correctly. Please follow the quick start guide (inside MHUB
packaging) to make sure your MHUB is connected correctly to your source devices, displays and
has an active network connection before proceeding.
I don’t use MHUB-OS or go through the rst boot process, will it still work like a normal matrix?
Yes. You do not need to access MHUB-OS if you don’t want to. MHUB will work distributing video
as normal and will be controllable using the included remote controls. Please note that you will not
be able to access advanced features such as voice control, the uControl app or build Sequences.
Accessing MHUB-OS (MOS)
There are two ways to access MOS:
1. Download our app, uControl, from the iOS or Google Play Store and let it nd MHUB (and run
you through the rst boot) for you.
2. Go to your MHUB and press and hold the “MENU” button for 5 seconds to reveal its IP address.
(For example 192.168.1.200) Make a note of it then put that address into any web browser on
the same network. You will be forwarded to your MHUB-OS and prompted to complete the rst
boot process.
