HD Flow3 Super mini Manual de usuario

ver 1.0

User Manual and Installation Guide

HDM-W300R

www.hdflow.co.kr

READY

Wireless Full HD Sender Receiver

CONTENTS

Safety Precautions

Introduction

Product Specifications

Installation And Operation

Compliance Statements

Warranty

Read Before Operating Equipment

Unit Care Recommendations

Features

Package Contents

Video Format Supported

Audio Format Supported

Wireless Connection

Transmitter Front

Transmitter Back

Receiver Front

Receiver Back

Remote Control

Remote Control Battery Installation And Replacement

Connecting Source Components To The Transmitter

IR Flasher Installation (Setting Up IR Remote Control Capabilities for Source Devices)

IR Extender Installation (Optional)

Connecting The Receiver To The Display Device

Powering-Up HD FLOW3 Super mini Wireless AV Multi Display System

Input And Output Selection

Multicast Mode - Pairing Additional Receiver(s) With The Transmitter

Tips

Indicator Lights Decoded

Factory Reset

How To Check The Firmware Version

Supported Video Formats

FCC Compliance

CE Compliance

IC Compliance

.................................................................................3

..........................................................................................3

..........................................................................................................................4

..........................................................................................................4

................................................................................................ 5

...................................................................................................... 5

.............................................................................................................6

..............................................................................................................6

.................................................................................................................7

..................................................................................................................7

................................................................................................................8

.................................................. 8

......................................................9

..............9

.................................................................................10

.........................................................10

.....................10

...........................................................................................10

..........................11

................................................................................................................................11

...............................................................................................11

................................................................................................................12

...........................................................................12

.............................................................................................12

...........................................................................................................13

..............................................................................................................13

...............................................................................................................13

..............................................................................................................3

.........................................................................................................................4

.......................................................................................................5

.................................................................................................9

...................................................................................................13

............................................................................................................................14

SAFETY PRECAUTIONS

Read Before Operating Equipment

Thank you for purchasing our product. Before using it, please read this user manual carefully

and follow the instructions correctly for safe operation. Please keep this manual handy for future

reference.

Unit Care Recommendations

•

Unit can be placed vertically (preferred) or horizontally.

To clean, use a soft, dry cloth only. Do not use water or other cleaning

products as they may cause electrical failure or damage the surface of the

product.

Keep the product out of reach of

children.

Keep the product away from

external heat sources such as

heaters or stoves.

Do not insert foreign objects into

the unit.

Do not place the unit on an

unstable surface or in a poorly

ventilated area.

Make sure to plug the AC power

adaptors firmly into wall outlets.

Do not use the unit near any

flammable substances or

combustible sprays.

If any part of the AC power

adaptor looks damaged, do not

use the product immediately.

Keep the product unplugged if

unused for an extended period

of time.

If there is any unusual sound,

smoke or odor coming from the

product, immediately unplug the

product.

Keep the battery of remote control

out of reach of children.

Do not attempt to open the

outer case of the Transmitter or

Receiver. Doing so will void the

product warranty.

Keep the remote control away

from humidity and/or liquids.

INTRODUCTION

* Works with passive 3D signals

Features

•

Low latency: ≤21ms.

Supports 3 HDMI video/audio.

Supports Wireless connection - IEEE 802.11n 5 GHz WiFi.

Two internal antennas (supporting MIMO).

HDCP v1.3 compliant.

Supports both DTV & VESA standards:

DTV: 1920x1080i60/p60, 1280x720p50/60,720x576i50/p50, 720x480i60/p60,

VESA : SXGA(1280x1024), WXGA(1280x800), XGA+(1152x864), XGA(1024x768),

SVGA(800x600), VGA(640x480),1280x960, 1360x768.

Supports passive 3D content.

Plug and play setup requires no software programming.

Package Contents

Ensure that the following items are present in the package.

ReceiverTransmitter

Battery

IR-Flasher Manual

Stand (2)

Manual Quick Start Guide

Remote Control

Quick Start Guide

AC Adaptor (2)

HD FLOW3 Super mini Wireless AV Multi Display System provides Full HD 1080p signal

transfer, including 3D signal*, without the hassle of running cables. Create brilliant HD quality

multimedia for signage, presentations, or entertainment in any location, completely un-tethered

to your source device!

By simply connecting the Transmitter to a multimedia device such as a computer, set-top box, or

Blu-ray™ player and connecting the Receiver to a display device, instant high definition digital

audio and video can be placed into in any commercial or residential setting. HD FLOW3 Super

mini Wireless AV Multi Display System transmits through walls and floors to allow the compo-

nents to be neatly tucked away in an AV rack or media cabinet, and is the ideal solution for quick

and easy installation where running cable is cost prohibitive or simply not an option.

PRODUCT SPECIFICATIONS

HDM-W300R

Video Input

(Transmitter) 3x HDMI up to 1080p60

1x HDMI pass-thru output (pass-thru port mirrors HDMI 1)

Video Output

(Receiver) 1x HDMI up to 1080p60

Encoding

Decoding

Wireless Connection

Audio

Video Resolution

Video Latency

Frequency

Range

Multicast

Security

HDCP Version

Antenna Type

IR Emitter

Control Remote

Power

H.264 Baseline Profile

H.264 Baseline, Main, High Profile

IEEE 802.11n

2 CH PCM, 48kHz, 16 Bit

480i/p, 720p, 1080i/p (24/30 fps)

21mS

5.15~5.25GHz / 5.725~5.825GHz

(Limited band may be preset based on the regional regulations.)

210 ft (64M)

Up to 6 receivers (Requires additional receiver units)

WPA2 Personal and AES

1.3

MIMO, 2x Internal

3 IR Emitters on a single wire

17 button IR remote

12 VDC at 2 Amps (both transmitter and receiver)

1. Video Format Supported

2. Audio Format Supported

3. Wireless Connection

4. WiFi Channel Frequencies

• Digital Video

- HDMI : Up to 1080p @ 24Hz, 25Hz, 30Hz, 50Hz, 60Hz

• Analog

• Digital

• Receiver outputs stereo audio

• Unicast (Peer-to-Peer) Wireless Mode

• Multicast Wireless Mode

• 5.15~5.25GHz / 5.725~5.825GHz

(Limited band may be preset based on the regional regulations.)

Transmitter Front

1. Power/Link Indicator Light

•

Blinking indicator light - Establishing link between the Transmitter and the Receiver.

Solid indicator light - Link between the Transmitter and Receiver

has been established and is ready for signal transmission.

The HDMI 1 indicator light will be illuminated when

the HDMI 1 port is selected for video input.

If there is no signal, and/or the cable is not connected,

the indicator light will blink.

The HDMI 2 indicator light will be illuminated when

the HDMI 2 port is selected for video input.

If there is no signal, and/or the cable is not connected,

the indicator light will blink.

The HDMI 3 indicator light will be illuminated when

the HDMI 3 port is selected for video input.

If there is no signal, and/or the cable is not connected,

the indicator light will blink.

•IR receiving window enables remote control of

the transmitter and the receivers.

When powered on: Press for one second to select

the video input source.

Each press of the button will cycle through t

he available video input "HDMI1→HDMI2 →

HDMI3 →HDMI1" in sequence.

Press and hold for 8 seconds until all indicator

lights blink synchronously, you are now in Scan/Pairing Mode.

• Connects IR Flasher to the Transmitter for

remote control of external devices which

are connected to the Transmitter

(i.e. Blu-Ray player, DVD, STB, etc).

2. HDMI 1

3. HDMI 2

4. HDMI 3

5. IR Window

6. Link/Source Selection Button

Transmitter Back

1. HDMI 1 IN

• HDMI1 input port.

2. HDMI Pass-Thru

• Outputs a duplicate of the source that is plugged into.

3. HDMI 2 IN

• HDMI2 input port.

4. HDMI 3 IN

• HDMI3 input port.

5. IR-OUT

6. DC

• 12V DC power input.

Receiver Front

1. Power/Link Indicator Light

• Blinking indicator light - Establishing

link between the Transmitter and

the Receiver.

• Solid indicator light - Link between

the Transmitter and Receiver has

been established and is ready for

signal transmission.

2. HDMI

• The HDMI indicator light will be

illuminated when the HDMI port

is selected for video output.

• If there is no signal, and/or the

cable is not connected, the indicator

light will blink.

3. IR Window

• IR receiving window enables

remote control o

f the transmitter

and/or source components.

4. Link/Output Selection Button

• When powered on: HDMI indicator lights blink.

• Press and hold for 8 seconds until

all indicator lights blink

synchronously, you are now in

Scan/Pairing Mode.

Receiver Back

1. HDMI-OUT

• HDMI output port

8. DC

• 12V DC Power Input

* For better IR reception range, use the IR input port with

IR extender (not included).

Remote Control

1. POWER ON Button- Turns the

Transmitter and Receiver power ON

2. POWER OFF Button- Turns the

Transmitter and Receiver power OFF

4. VIDEO OUT(Receiver) - Selects

the Audio/Video output port of the

Receiver.

• HDMI - Selects HDMI as the

Audio/Video output.

Note:Remote must be pointing directly at the Receiver to control its output settings. This may

also be accomplished without the use of the remote control by toggling between outputs via

the Link/Output Selection Button.

5. VIDEO IN(Transmitter) - Selects the Video input port of the Transmitter.

• HDMI1 - Selects HDMI1 as the Audio/Video input.

• HDMI2 - Selects HDMI2 as the Audio/Video input.

• HDMI3 - Selects HDMI3 as the Audio/Video input.

6. Scan- Selects Scan/Pairing mode. System will re-scan among 10 possible WiFi frequencies

and select the Optimum available channel.

The channel selected will be displayed when “Info” is pressed.

7. MENU and DOWN, RIGHT, LEFT Buttons

- Disabled - for future use.

8. UP Button- This will scroll through the possible IR frequencies. This device accommodates

most IR protocols in use today. To do so it will require selecting the one of four possible carrier

frequencies available for IR control. Press the UP arrow to scroll between 31 KHz, 38 KHz,

47 KHz and 57 KHz frequencies.

Select a frequency and try your source remote. If the control responds, then you have

selected the correct one. If the device does not respond, try another frequency. If no

frequencies seem to work, ensure the IR emitter is located in the correct location on the

source component.

POWER POWER

RECEIVER TRANSMITTER

FFONO

MENU SCAN

/ BACK

INFO

/ OK

HDMI HDMI1

COMPONENT PC HDMI2

AV AV HDMI3

Remote Control Battery Installation And Replacement

The battery clip is located on the bottom of the remote control.

Battery ClipTab

123 Push the tab, located on the left of the

battery clip, to the right and pull out the clip.

Place the battery into the clip, positive (+)

end facing up as shown.

Place the clip back into the remote to

complete the installation.

3. INFO/OK*- Displays the following

information on the screen:

• Transmitter - WiFi IP and Source

Resolution.

Note: The Transmitter unit’s

information will only be

displayed if the connection

between the Transmitter unit

and Receiver has been

established.

• Receiver - WiFi IP, WiFi Channel,

SSID, Display Resolution,

WiFi Reception Strength.

Displayed information will disappear

automatically after 30 seconds.

INSTALLATION AND OPERATION

• Connect HDMI cable from the Transmitter’s pass-thru

output port to the input of the display device to enjoy

the video coming through HDMI1 only.

A) Connecting Source Components To The Transmitter

a. HDMI Media Source

• Note : It is recommended that HDMI1 input port be used if only one HDMI source

component is present.

• Connect HDMI cable from the source components

output to the Transmitter's HDMI1 or HDMI2 or

HDMI3 input port.

B) IR Flasher Installation

(Setting Up IR Remote Control Capabilities for Source Devices)

IR-OUT Port

IR Flasher Eye

Before starting the installation, please ensure that all source components (Blu-ray player, cable

box, etc.) and the display equipment (TV, display, projector, etc.) are turned off.

For initial setup of your HD FLOW3 Super mini system complete steps A, B, C, D, E and F in

order.

IR Flashers are provided to allow for control of up to three source devices using the device’s

original remote control at the Receiver location.

Connect the provided IR Flasher to the IR-OUT port of the Transmitter.

Find the location of the IR window on your component and adhere the IR Flasher Eye directly

over the IR window of your component.

•

Note: One IR Flasher Eye is to be used for one component device.

Tips: Most often the IR window on the source device is easier to locate with direct light

shining on sections of the front panel of the device (a small flashlight or a camera phone

flashlight works well).

C) IR Extender Installation(Optional)

D) Connecting The Receiver To The Display Device

E) Powering-up HD FLOW3 Super mini Wireless AV Multi Display System

F) Input And Output Selection

Install the IR Extender by plugging in the IR Extender (not included) into the IR-IN port on the Receiver.

(IR Extender use is optional. Use the IR Extender when the Receiver is out of sight or to extend

the range of the Receiver's IR reception range.)

Connect the Receiver to the display device using the port with the highest capable resolution.

The HD FLOW3 Super mini is a video switch, and as such will upconvert all inputs with resolutions

of 480p, 720p, and 1080i/p through the HDMI Output.

Note :

Audi o and video sources will switch simultaneously whether using the remote or Selection Buttons.

Inputs on the Transmitter and Receiver can be switched by pointing the remote at the Transmitter or

Receiver ONLY if the connection between Transmitter and Receiver has been established, indicated

by a solid link light. If the connection between Transmitter and Receiver has not been established, the

inputs need to be selected at the location of each unit using either of the above input and output

selection methods.

Note :

Plug in the power adaptors for the Transmitter and the Receiver to available power outlets.

Plug in the other end of the power cables to the Transmitter and then to the Receiver. The units will

automatically turn on.

Turn on your display device (TV, monitor, projector, etc.).

While turning on the display device, the HD FLOW3 Super mini System will be going through the

start up process. The process takes approximately 45 seconds to complete. The

Power/Link Indicator Light on the Transmitter and Receiver should be flashing at first.

Flashing indicates that the units are establishing a secure connection. Wait until the

connection is successfully established, indicated by a solid Power/Link light on the

Receiver.

Select the output used to connect the Receiver to the display. There are two ways to choose output

sources on the HD FLOW3 Super mini Receiver:

a. Using the provided remote - Press the desired output while pointing the remote at the Receiver.

b. Using the Link/Output Selection Button on the Receiver - To toggle between outputs press the

Link/Output Selection Button for one second on the unit and release.

At this time the output Indicator Light will become solid and the HD FLOW3 Super mini logo will appear

on the display device if there is no source providing content. The HD FLOW3 Super mini logo is only

displayed when the receiver is working with the display, but no content is coming from the transmitter.

Turn on the desired media source device that is connected to the Transmitter.

Select the desired media source input on the Transmitter. There are two ways to select the source

input on the HD FLOW3 Super mini Transmitter:

Using the provided remote - Press the desired input while pointing the remote at the Transmitter.

b. Using the Link/Source Selection Button on the Transmitter - To toggle between Inputs press the

Link/Source Selection Button for one second on the unit and release.

Play the source device media content and enjoy up to a Full HD 1080p wireless entertainment

experience.

•

Connect the HDMI cable from the Receiver's HDMI output to the display device's HDMI

input.

HDMI Output to Display

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Receptor de HD Flow3

HD Flow3

HD Flow3 Super Mini HD-SM300 Manual de usuario

Manuales populares de Receptor de otras marcas

Garmin

Garmin GA 23 Manual de usuario

Aiphone

Aiphone PS-12F Manual de usuario

IMES

IMES TCS-01CA-PMI Manual de usuario

BWI Eagle

BWI Eagle AIR-EAGLE SR Manual

AMIMON

AMIMON AMN12310 WHDI Manual de usuario

Dual

Dual DMCPA79BT Instrucciones de funcionamiento

Sound Associates

Sound Associates SA652P Manual de usuario

Sherwood

Sherwood NewCastle R-772 Manual de usuario

Audio

Audio A10-RX Series Manual de usuario

AllSee

AllSee PushShare PSRV1.1 Manual de usuario

DEMAG

DEMAG DRC-DR D2 Manual de usuario

Teleco

Teleco TVRCL868A02 Manual de usuario

Bosch

Bosch RF3222E Manual de usuario

Kramer

Kramer 631R Manual de usuario

Xpress

Xpress xmc10 Manual de usuario

JVC

JVC KD-MR1BTS Manual de usuario

Omega Engineering

Omega Engineering UWTC-REC3 Manual de usuario

e-survey

e-survey E300 Pro Manual de usuario