HD29596 PoE is designed specifically for the device implemented
advanced MCU control technology and it has efficient protection of each port.
It is used with wireless access points (AP’s), IP cameras, VoIP, and other
devices that require network and power supplies.
1. The LCD display and control panel display the total power, power of each
port, the device temperature, etc. (only for 8-port PoE).
2. The PoE and UPLNK port support automatic MDI/MDI-X function.
3. Supplies four PoE power ports and one UPLINK port.
4. 10/100Mbps, full/half duplex automatic adapt.
5. Compliant with IEEE802.3af, IEEE802.3 at standard, 25W Max per port.
6. Backplane switching capacity of 1.0Gpbs.
7. 2K MAC address list.
8. Do not exceed more than 100 meters (328ft) of cable from the unit.
9. Offers effective short circuit, overload and total protection.
10. Each port offers an indicator light and device alarm light.
11. Wall mounting hole.
