Hayward SelectaFlo Guía del administrador

SelectaFlo™Hi-Efficiency Valve

How To Guide

Table of Contents

How To:

Pg.

Product Overview

Function

of Valve Positions

Handle Installation

Assembly

Operating Instructions

Winterization Disassembly

Valve: Replacement Parts

Valve: Product Overview

•The SelectaFlo Hi-Efficiency valve is designed

for Hayward ProGrid DE series filters.

•The valve has built in unions to attach to the

filter.

•The Pump, Return, and Waste ports are 2” SKT

x 2 ½ Spigot (solvent weld) connections.

•The supplied elbow can be used on the waste

port to direct waste piping away from the

equipment pad.

•For connections to the TriStar and the EcoStar

pumps, use the supplied EcoFlo union fitting

from the pump outlet to the pump port on the

valve.

Valve: Function of Valve Positions

ALWAYS turn off pump before changing valve position.

VALVE

SETTING FLOW DIRECTION THROUGH VALVE

(1)

FILTER

PUMP

–THROUGH FILTER –RETURN

For normal filtration and vacuuming pool

through filter.

(2)

BACKWASH

PUMP

–THROUGH FILTER –WASTE

For cleaning filter.

(3)

RECIRCULATE

PUMP

–THROUGH VALVE –RETURN

For bypassing filter, but circulating

pool

water.

(4)

WASTE

PUMP

–THROUGH VALVE ONLY –

WASTE

For vacuuming directly to waste, lowering

pool level and/or

draining pool.

Use the steps provided to install the handle assembly.

Secure the handle to valve by aligning the thin

tooth on handle with the thin slot on valve

shaft.

Insert the screw into handle & tighten with a

3/8” socket & ratchet. Align and press handle

plug into slot to cover screw.

Completed assembly will look like picture

above.

Step 2

Step 3

Step 1

Valve: Installation: Handle

Use the steps provided to install the valve assembly.

Install waste port seal carrier by aligning the

locating features (arrows) on the carrier and

the bottom of the valve body

Lubricate inward facing seals with silicon lube

and install seal carriers by firmly pressing them

down into their slots.

Install Hub Assembly into valve body by

aligning the locating features (arrows).

Step 2

Step 1

Valve: Assembly

Fold handle down and install the cover by

aligning cover and hub locating features.

Step 4Step 3

Depress button on handle to release handle

latch.

With button depressed rotate handle to

desired valve position.

Step 2

Step 1

Valve: Operating Instructions

Release button on handle, allowing handle to

lock into position.

Step 3

Turn off pump before changing valve position.

Turn off pump before disassembling filter control valve.

Rotate lock ring counterclockwise for removal

of the cover assembly.

Remove cover assembly. If difficult to remove,

rock the base of the handle while pulling up.

Using handle, lift hub assembly out of the

body.

Step 2

Step 1

Valve: Winterization Disassembly

Remove seal carriers and check for wear.

Replace worn or damaged parts.

Step 4

X 2

Step 3

Este manual sirve para los siguientes modelos

Otros manuales de Unidad de control de Hayward

Hayward

Hayward SP0710XR50 Manual de usuario

Hayward

Hayward CAT 5000 Manual de usuario

Hayward

Hayward PVC Series Manual

Hayward

Hayward VariFlo SP0712 Manual de usuario

Hayward

Hayward AquaTrol Manual de usuario

Hayward

Hayward HCV30798 Manual de usuario

Hayward

Hayward SP0730 Manual de usuario

Hayward

Hayward H-Power HPOW230BDT50 Manual de usuario

Hayward

Hayward SelectaFlo SP0425 Manual de usuario

Hayward

Hayward HCV20715 Manual de usuario

Hayward

Hayward SP0735 Manual de usuario

Hayward

Hayward OmniPL HLBPRO4SW Manual de usuario

Hayward

Hayward VariFlo Multiport SP0710X62 Manual de usuario

Hayward

Hayward PSV series Manual de usuario

Hayward

Hayward BYCS Series Manual

Hayward

Hayward HCV375 Manual de usuario

Hayward

Hayward VariFlo Multiport SP0715ALL Manual de usuario

Hayward

Hayward OmniPL HLPRO4NSW Manual de usuario

Hayward

Hayward TC Series Manual

Hayward

Hayward PBV series Manual

Hayward

Hayward TB SERIES Manual

Hayward

Hayward SP0722 Manual de usuario

Hayward

Hayward GLX-PCB-PRO Instrucciones de funcionamiento y seguridad

Manuales populares de Unidad de control de otras marcas

Festo

Festo Compact Performance CP-FB6-E Manual de lista de piezas

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manual de usuario

JS Automation

JS Automation MPC3034A Manual de usuario

JAUDT

JAUDT SW GII 6406 Series Guía rápida

Spektrum

Spektrum Air Module System Manual de usuario

BOC Edwards

BOC Edwards Q Series Manual de usuario

KHADAS

KHADAS BT Magic Manual de usuario

Etherma

Etherma eNEXHO-IL Manual de usuario

PMFoundations

PMFoundations Attenuverter Manual de usuario

GEA

GEA VARIVENT Manual de usuario

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manual de usuario

Altronix

Altronix LINQ8PD Instrucciones de montaje

Eaton

Eaton Powerware Series Manual de usuario

WAGO

WAGO 750-407/040-000 Manual de usuario

Sony

Sony CCU-590 Manual de usuario

Graco

Graco 25D614 Manual de usuario

Task Force Tips

Task Force Tips YE-RF-900 Manual de programación

Shini

Shini SPV-U Series Manual de usuario