Hatteland HT 404P4 STD Manual de usuario
User Manual HT 404P4 STD
Updated: 18 Dec 2008 Doc Id: INB100025-2 (Rev 8)
For models:
-A1
Slim
User Manual
USER MANUAL
HT 404P4 STD - Maritime Rack Computer
Hatteland Display AS, Åmsosen, N-5578 Nedre Vats, Norway
Tel: (+47) 5276 3700 - Fax: (+47) 5276 5444 - info@hatteland-display.com
Please visit our website for the latest electronic version of this manual.
Copyright © 2008 Hatteland Display AS
Aamsosen, N-5578 Nedre Vats, Norway
Information in this manual is copyrighted to the respective owners. All rights are reserved by
Hatteland Display AS. This information may not, in whole or in part, be copied, photocopied, reproduced,
translated or reduced to any electronic medium or machine-readable form without the prior written consent
of Hatteland Display AS.
The products described, or referenced, herein are copyrighted to the respective owners.
The products may not be copied or duplicated in any way. This documentation contains proprietary
information that is not to be disclosed to persons outside the user’s company without prior written consent
of Hatteland Display AS.
The copyright notice appearing above is included to provide statutory protection in the event of
unauthorized or unintentional public disclosure.
All other product names or trademarks are properties of their respective owners !
WARNING: This is a class A product. In a domestic environment this product may cause radio interference
in which case the user may be required to take adequate measures.
3
IND100206-11
INB100025-2 (Rev 8)
Contents.................................................................................... 3
Contents of package ..........................................................................4
General ...................................................................................... 5
About Hatteland Display.....................................................................6
About this manual...............................................................................6
Basic Construction .............................................................................7
Product Labels (Example)..................................................................8
Serial Number Label ......................................................................8
Warranty Label ...............................................................................8
Installation................................................................................. 9
Installation and mounting of computers............................................10
Cables ..............................................................................................10
Ferrites .............................................................................................10
Physical Connections - HT 404P4 STD ........................................... 11
Operation................................................................................. 13
User Controls - HT 404P4 STD........................................................14
Specications ......................................................................... 15
Specications - HT 404P4 STD........................................................16
Technical Drawings ................................................................ 17
Technical Drawings - HT 404P4 STD...............................................18
Appendixes ............................................................................. 19
Pin Assignments - Common Connectors..........................................20
Basic Trouble-shooting.....................................................................22
Declaration of Conformity.................................................................23
Return Of Goods Information ...........................................................24
Terms................................................................................................25
Notes ................................................................................................27
Revision History - HT 404P4 STD....................................................29
Contact Information ............................................................... 30
Contents
4
IND100207-3
INB100025-2 (Rev 8)
Item Description Illustration
Documentation/Drivers/Software CD(s) for factory installed
components like mainboard, IDE, network etc.
1 pcs of power cable European Type F “Schuko” to IEC.
Length 1.8m
Note: Power cable not included with the DC model.
EUR TYPE F
IEC
1 pcs of power cable US Type B plug to IEC.
Length 1.8m
Note: Power cable not included with the DC model.
US TYPE B IEC
1 pcs of User Manual (Slim version)
Note: The separate documentation for third party
components may be available on attached CD. The printed
manual only covers specific information for Hatteland
products, and not third party components.
1 pcs of configuration, test report and checklist sheets.
2 pcs of Würth 742 7111 Ferrite (for LAN cables)
4 pcs of Würth 742 712 21 Ferrite (for COM/LPT cables)
Must be mounted on cables to fully comply with
type approvals. See “Installation” chapter for instructions.
This product is shipped with:
Contents of package
5INB100025-2 (Rev 8)
General
6
Hatteland Display AS
IND100077-1
INB100025-2 (Rev 8)
General
About Hatteland Display
Hatteland Display is the leading technology provider of maritime display and computer products. We deliver high
quality, unique and customized solutions to the international maritime market.
The company represents innovation and quality to the system integrators world wide. Effective quality assurance and
investment in sophisticated in-house manufacturing methods and facilities enable us to deliver type approved and Mil
tested high quality products.
Our customer oriented approach, technical knowledge and dedication to R&D, makes us a trusted and preferred
supplier of approved solutions, which are backed up by a strong service network.
About this manual
The manual contains electrical, mechanical and input/output signal specications. All specications in this manual,
due to manufacturing, new revisions and approvals, are subject to change without notice. However, the last update
and revision of this manual are shown both on the frontpage and also in the “Revision History” chapter. Please use
that as a reference.
Furthermore, for third party datasheet and user manuals, please see dedicated interactive CD (where included) deliv-
ered with the product or contact our sales personnel for support. Please see the Contents Of Package chapter in the
beginning of this manual to determine if a dedicated manual CD are included.
7
IND100209-1
INB100025-2 (Rev 8)
General
Basic Construction Rack Computers
Chassis
Basic Construction
Mainboard
Fans
Harddrive
Removable Harddrive
Peripheral PCI/AGP cards
Memory
CD-ROM & Floppy
8
IND100240-1
INB100025-2 (Rev 8)
General
Product Information
Manufacturer: Product: Product type:
Hatteland Display Computer HT 202P4 STD-A1
Serial Number
NORWAY HT 202P4 STD-A1-121
Product Labels (Example)
Serial Number Label
Product Type & Serial Number
HT XXAXX AAA-AX-XXX NOMENCLATURE
HT 202P4 STD-A1-121 Example
Serial Number
Hardware Sub Version (AC-Odd / DC-Even number)
Standard Term ID or Customized Term ID
Processor/CPU Type ID
Mechanical Chassis/Cabinet ID
Rack Size ID (2=2U - 4=4U - B=Black Box)
Manufacturer ID/Product Series ID
Manufacturer & Country Product Type & Serial Number
Description
Warranty Label
This label may be present on the product (hardware dependent). If you are to perform service
on a unit still under warranty, the warranty will be void if this label is attempted removed, re-
glued or removed completely. This label is usually located on the back of the product and
covers an mechanical gap/edge or protects a key screw. This is to enable service departments
determine if there has been any unauthorized service on a product still under warranty.
9INB100025-2 (Rev 8)
Installation
10
IND100210-1
INB100025-2 (Rev 8)
Installation
Installation and mounting of computers
1. Units may be intended for various methods of installation or mounting (rack mounting, panel mounting,
bracket mounting, ceiling/wall mounting); for details, please see the relevant mechanical drawings.
2. Adequate ventilation is a necessary prerequisite for the life of the unit. The air inlet and outlet openings must
denitely be kept clear; coverings which restrict ventilation are not permissible. The product might be without
any ventilation aperatures which means pt.2 does not apply.
3. Exposure to direct sunlight can cause a considerable increase in the temperature of the unit, and might under
certain circumstances lead to overtemperature. This point should already be taken into consideration when
the bridge equipment is being planned (sun shades, distance from the windows, ventilation, etc.)
4. Space necessary for ventilation, for cable inlets, for the operating procedures and for maintenance, must be
provided.
5. To further improve the cooling of the unit we recommend installing Cooling Fans underneath blowing upwards
into the unit air inlet. This may be required in high temperature applications and also when there is reason to
expect temperature problems due to non-optimal way of mounting.
General mounting instructions
1. The useful life of the components of all Electronics Units generally decreases with increasing ambient
temperature; it is therefore advisable to install such units in air-conditioned rooms. If there are no such
facilities, these rooms must at least be dry, adequately ventilated and kept at a suitable temperature in order
to prevent the formation of condensation inside the unit.
2. With most Electronic Units, cooling takes place via the surface of the casing. The cooling must not be
impaired by partial covering of the unit or by installation of the unit in a conned cabinet.
3. In the area of the wheel house, the distance of each electronics unit from the magnetic standard compass or
the magnetic steering compass must not be less than the permitted magnetic protection distance. This
distance is measured from the centre of the magnetic system of the compass to the nearest point on the
corresponding unit concerned. The exact distance is often mentioned in the specic product specications.
4. Transportation damage, even if apparently insignicant at rst glance, must immediately be examined and be
reported to the freight carrier. The moment of setting-to-work of the equipment is too late, not only for
reporting the damage but also for the supply of replacements.
Cables
Use only high quality shielded signal cables. For RGB/DVI cables use only cables with separate coax for Red, Green
and Blue.
Ferrites
On selected products, the ferrites prevent high frequency electrical noise (radio frequency interference) from exiting
or entering the equipment. To verify if your product require this, please see the “Physical Overview” chapter in this
manual. The ferrites are part of the contents of the package also specied in the “Contents Of Package” chapter early
in this manual. The ferrites must be mounted on specic cables to fully comply with the Type Approvals!
The ferrites should be mounted (clipped in place on the cable as shown in illustration) as close as possible to
the cable connector on the rear side of the computer product. Open up the ferrite, place the cable inside
as shown in FIG1, and then gently close it until a click can be heard (FIG2).
General Installation Recommendations
FIG1 FIG2
To computer To computer
Tabla de contenidos
Otros manuales de De oficina de Hatteland
Hatteland
Hatteland JH 15T17 MMC series Manual de usuario
Hatteland
Hatteland HT 403XE STD Manual de usuario
Hatteland
Hatteland HT 205P4 STD Manual de usuario
Hatteland
Hatteland HT 403P4 STD Manual de usuario
Hatteland
Hatteland 1 Series Manual de usuario
Hatteland
Hatteland HT 405P4 STD Manual de usuario
Hatteland
Hatteland HT B17 Series Manual de usuario
Hatteland
Hatteland HT B17 Series Manual de usuario
Hatteland
Hatteland JH I2TOI MMC Manual de usuario
Hatteland
Hatteland X Series Manual de usuario
