HARTING MICA IO-Link Series Manual de usuario

User Guide

MICA IO-Link Gateway

MICA IO-Link Gateway - User Manual

2 HARTING IT Software Development

1st Edition 2020

No part of this manual may be reproduced in any form (print, photocopy, microfilm or any other

process), processed, duplicated or distributed by means of electronic systems without the

written permission of HARTING IT Software Development GmbH & Co. KG, Espelkamp.

Version 1.0. Subject to alterations without notice.

MICA IO-Link Gateway - User Manual 
Table of Contents –3 
Inhalt 
1Introduction ..........................................................................................................................4 
1.1 About the MICA IO-Link Gateway Container......................................................................4 
1.2 MICA IO-Link Gateway Limitations ....................................................................................4 
2General Overview.................................................................................................................5 
2.1 Operation Requirements and Conditions...........................................................................5 
3Installation, Initial Setup and Configuration......................................................................6 
3.1 Connecting the MICA IO-Link.............................................................................................6 
3.2 Installation of the IO-Link Gateway ....................................................................................6 
3.2.1 Default Installation.........................................................................................................................6 
4Basic Container Operations................................................................................................8 
5Using the IO-Link Gateway..................................................................................................9 
5.1 MICA IO-Link Master..........................................................................................................9 
5.1.1 Using IO-Link Ports as Digital I/O..................................................................................................9 
5.2 Devices.............................................................................................................................10 
5.3 IODD Store.......................................................................................................................10 
5.4 Executor............................................................................................................................11 
5.5 Reports.............................................................................................................................11 
5.6 Subscribers.......................................................................................................................12 
5.6.1 Creating a new Subscriber..........................................................................................................12 
5.6.2 Deleting a Subscriber..................................................................................................................13 
6Working with Logs.............................................................................................................14 
7REST API.............................................................................................................................15 
8Troubleshooting.................................................................................................................16 
 

MICA IO-Link Gateway - User Manual

4 HARTING IT Software Development

1 Introduction

1.1 About the MICA IO-Link Gateway Container

MICA IO-Link Gateway is a MICA container that lets you configure, and communicate with, IO-

Link devices connected to a HARTING MICA IO-Link or MICA Wireless IO-Link..

1.2 MICA IO-Link Gateway Limitations

The MICA IO-Link Gateway currently does not support external or third-party IO-Link masters.

MICA IO-Link Gateway - User Manual

2 General Overview

2.1 Operation Requirements and Conditions

MICA IO-Link Gateway requires a MICA IO-Link or MICA Wireless IO-Link.

MICA IO-Link M5

MICA IO-Link M8

MICA Wireless IO-Link M5

MICA Wireless IO-Link M8

MICA IO-Link Gateway - User Manual

6 HARTING IT Software Development

3 Installation, Initial Setup and Configuration

3.1 Connecting the MICA IO-Link

For connecting and logging into a MICA IO-Link or MICA Wireless IO-Link, see the MICA

Getting Started available at harting-mica.com. All MICA IO-Link variants have a supplemental

M8/24V input next to the IO-Link ports. This input is used to provide 24V power from the MICA

to IO-Link devices.

Depending on the model, you can connect either 3 or 4 IO-Link devices using M8 –M12 or M5

–M12 cables respectively. We recommend only using HARTING IO-Link cables.

MICA IO-Link M5

MICA IO-Link M8

MICA Wireless IO-Link M5

MICA Wireless IO-Link M8

3.2 Installation of the IO-Link Gateway

3.2.1 Default Installation

With this software package, you can install the MICA IO-Link Gateway on a MICA.

1. Log in to the MICA with admin rights.

2. Click Install.

3. Click Select File and select the installation archive.

4. Click Execute to start the installation.

5. The installer will display the readme file with information about the installation archive.

MICA IO-Link Gateway - User Manual

6. Wait until the installation is finished and click Close.

The installed containers IOLink and IODDstore are initially turned off. Right Click first on the

IODDstore container and then the IOLink and container and press Start App button to start the

container.

MICA IO-Link Gateway - User Manual

8 HARTING IT Software Development

4 Basic Container Operations

Right clicking the MICA IO-Link Gateway Container tile opens the container’s context menu.

Press Options to access the following functions:

•Start App / Stop App: Starts or stops the container.

•Options: Expands or hides the basic container functions.

•Settings: Shows the container information and lets you configure

the IPv4 / IPv6 settings, an Additional Network Interface and the

Single Sign On Mode.

•Duplicate: Duplicates the container on your MICA.

•Export: Exports the container to your PC or a network drive. All

configurations you set will be kept.

•Merge: Overwrites the reset point of the Container with its current

configuration.

•Reset: Resets the configuration of the MICA IO-Link Gateway to the

last reset point (factory default if no merge was executed before).

•Delete: Deletes the Container including all its configuration and

user data.

MICA IO-Link Gateway - User Manual

5 Using the IO-Link Gateway

After starting the container, you can open the user interface by clicking the MICA IO-Link

Gateway Container tile.

The user interface consists of six sections. To make changes to a section, click on the section

title or the button with the chevron left of the section title.

5.1 MICA IO-Link Master

The MICA IO-Link Master section lets you view and configure the settings of the IO-Link master,

ports, and devices. It is also lets you upgrade the firmware of the integrated IO-Link master.

To configure an IO-Link device, connect the device to a port on the front panel, open the

associated port section, enter the Vendor ID and Device ID, the cycle time in milliseconds, the

Validation setting, and the IO-Link Mode.

Before a device can be activated, the correct IODD file must have been stored in the IODD

Store (see section 5.3).

If the container shipped with a newer version of the IO-Link master firmware than the one

installed on the master, it will display an Install button at the end of the section. Click this button

to update the firmware on the master to the latest version.

5.1.1 Using IO-Link Ports as Digital I/O

The IO-Link Gateway also supports the standard IO-Link digital input and digital output modes:

MICA IO-Link Gateway - User Manual

10 HARTING IT Software Development

•In DIGITAL_INPUT/“DI” mode, the port functions as a digital input.

•In DIGITAL_OUTPUT/“DQ” mode, the port functions as a digital output.

5.2 Devices

The Devices section lists all currently connected devices, their operation modes and their

statuses. You can mouse over the icons to get additional information.

To see the device properties, assign labels to devices, or to inspect or add labels to individual

fields, click on the device name to open the device information window.

You can give any IO Link device a label to make it easier to identify and remember.

To see the fields and field properties of the device, open the Fields section and click on any field

name to inspect the field properties.

For digital IO devices, the port and the IO pin (normally pin 4) are listed in the device

information window.

5.3 IODD Store

Before you can use an IO-Link device, you must add its VendorID, DeviceID and IODD file to

the IODD Store. To enter the VendorID and DeviceID, click on the field and enter a value using

your keyboard or the up and down arrows. To upload an IODD file, click in the IODD File field

to open a file browser and select the correct IODD file.

As a convenience, links to an online Vendor ID lookup table and IODD finder are included below

the table.

To delete an IODD entry, click the (x) in the right column. Only one IODD file per device can be

uploaded to the IODD Store.

Note: For the IODD Store functionality to work, the IODDstore container must be installed and

running.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Puerta de HARTING

HARTING

HARTING OPC-UA Manual de usuario

HARTING

HARTING OPC-UA Manual de usuario

Manuales populares de Puerta de otras marcas

LST

LST M500RFE-AS Manual de usuario

Kinnex

Kinnex Media Gateway Manual de usuario

2N Telekomunikace

2N Telekomunikace 2N StarGate Manual de usuario

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Manual de usuario

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Manual de usuario

Telsey

Telsey CPVA 500 - SIP Manual de usuario

RTA

RTA 460A-NNA4 Hoja de especificaciones

Shaw

Shaw Gateway HDPVR Manual de usuario

ABB

ABB VSN900 Guía de inicio rápido

Commander

Commander Pulse Manual de usuario

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Manual de usuario

NETGEAR

NETGEAR C6300BD Manual de usuario

Amit

Amit CDW531AM Manual de usuario

HMS

HMS Netbiter EasyConnect EC150 Manual de usuario

Huawei

Huawei EchoLife HG620 Manual de usuario

AT&T

AT&T U-verse 3801 Manual de uso y cuidado

Logic IO

Logic IO RTCU MX2 turbo Manual de usuario

Suttle

Suttle MediaMAX MXM-521 Manual de usuario