1SAFETY INSTRUCTIONS
• Before installing or using the product, ensure you have read and understood all of the warning and
safety messages supplied with your product.
• Our range of inverters should be installed by licensed professionals only.
• Before installing, cleaning, or inspecting the unit for maintenance, ensure that the inverter is
disconnected.
• Children, those without the proper training or experience, or those under the influence of drugs or
alcohol should not operate this unit.
• Before wiring up the inverter, make sure to inspect your leads to make sure they are free from faults
or frays. The cables used to connect the battery to the inverter need to be of a particular gauge.
Consult the wiring guide found in this manual for more information. Failure to use leads fit for
purpose may cause fire, shock, or damage to the unit.
• Reverse polarity will cause the inverter’s fuses to blow and may damage the inverter. Make sure to
pay close attention when hooking up the inverter, ensuring that the negative and positive terminals
are clean and are connected to the correct corresponding battery terminals.
• It’s common for the inverter to arc when wiring up the final connection. Make sure to keep any
flammable materials away from the installation area.
• Do not store or operate the inverter in a location where it may be subject to water, temperatures
below -20°C or above 40°C, or in areas where it's at risk of contacting chemicals, fumes, or gases.
• The inverter contains sensitive electrical equipment which may be damaged if the unit is subjected to
pressure or impact. Ensure that the inverter is securely mounted to prevent it from falling.
• The inverter should be installed in a way that allows for proper ventilation around the unit. Ensure
that the fans and vents are not obstructed. We recommend having at least 100mm of clearance
around the unit to allow for adequate airflow.
• The inverter should only be used with appliances that are in safe working condition. Make sure to
inspect both the wattage of the appliance and its leads and wires before operating.
• The inverter generates AC 240V power which, in extreme situations, can cause severe injury or
death. Whilst the inverter has been engineered with advanced internal protections, caution should
be used when operating the unit. Metal objects (except for dedicated plugs) should be kept away
from the inverter’s ports.
• The inverter should not be opened or disassembled under any circumstance. Doing so will void the
warranty and may cause damage/injury to those in proximity.
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY
