Harbor Freight Tools NITROUS 98475 Manual de usuario

INSTRUCTIONS AND PRECAUTIONS

Distributed exclusively by Harbor Freight Tools®.

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our website at: http://www.harborfreight.com

SAVE THESE INSTRUCTIONS. READ ALL

PRECAUTIONS AND INSTRUCTIONS.

herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools.

Diagrams within this document may not be drawn proportionally. Due to continuing improvements, actual product

may differ slightly from the product described herein.

For technical questions or replacement parts, please call 1-800-444-3353.

UNPACKING

When unpacking, check to make sure that

the item is intact and undamaged. If any parts are

missing or broken, please call Harbor Freight Tools

at the number shown on the cover of this document

as soon as possible.

IMPORTANT SAFETY

INFORMATION

Assembly Precautions

Assemble only according to these instruc-1.

tions. Improper assembly can create haz-

ards.

Wear ANSI-approved safety goggles and2.

heavy-duty work gloves during assembly.

Keep assembly area clean and well lit.3.

Keep bystanders out of the area during as-4.

sembly.

Do not assemble when tired or when under5.

the inuence of drugs or medication.

Use Precautions

This product is not a toy. Do not allow chil-1.

dren to play with it.

Use for intended purpose(s) only.2.

Inspect before use; do not use if loose or3.

damaged.

Only use in accordance with State, local,4.

Federal and D.O.T. laws and regulations.

Disconnect vehicle battery negative post5.

before installation.

Positive and negative connections can not6.

touch. If you are unsure of how to install this

product safely then have a qualied mechan-

ic install the gauge for you.

Insulate connections to prevent re.7.

Maintain product labels and nameplates.8.

These carry important safety information.

If unreadable or missing, contact Harbor

Freight Tools for a replacement.

OIL PRESSURE

GAUGE

98475

SKU 98475 For technical questions, please call 1-800-444-3353. Page 2

ASSEMBLY INSTRUCTIONS

Read the ENTIRE IMPORTANT

SAFETY INFORMATION section at the

beginning of this document including

all text under subheadings therein

before set up or use of this product.

Setup

A round 2-1/16” wide hole with at least 2-1/2”1.

clearance behind is needed to install this

gauge.

At least 18 AWG stranded copper wire must2.

be purchased for the installation of this

gauge.

Some vehicles with air bags or other systems3.

may require precautions before disconnect-

ing the battery. Consult your vehicle’s service

manual.

Route and secure wires as needed to attach4.

the Gauge and sender to the desired area;

avoid sharp edges and hot spots.

Installation

Disconnect negative (-) vehicle battery cable1.

according to manufacturer’s instructions.

Reconnect when installation completed.

Wire Oil Pressure Gauge according to dia-2.

gram shown below in Figure 1.

Note: If Sensor is wired differently, do not install

this Gauge. Do not disconnect wires if sensor

is already connected to other wiring. Consult

a mechanic.

Green wires goes to oil pressure sensor unit.3.

Connect oil pressure sensor unit via oil lter

block sandwich or other means of plumb-

ing. Use teon tape or sealant on threads to

prevent oil leakage.

Wiring:4.

RED• Wire: Connects to a switched 12V

power source that turns on and off with

vehicle’s ignition switch.

CAUTION: It is recommended that a inline fuse

(1Amp/3AG) be installed before connecting

to the 12V ignition system.

GREEN• Wire: Connects to oil pressure

sensor unit. WARNING! Do not touch this

wire to positive source.

ORANGE• and WHITE Wires: Connect to

the 12V dashboard lights or other switch.

BLACK• Wire: Connects to a clean, or with

good connection, engine ground (-).

Install the meter into the hole. Attach bracket5.

onto the back of the meter and tighten.

Reconnect the battery according to the ve-6.

hicle service manual. Verify that there are no

short circuits before reconnecting.

Ensure that the pressure line wiring has7.

no leaks and is not near any parts that will

get hot during operation. Check for loose

strands of wire and direct contact with

grounded components. Use a multimeter with

a continuity function to help verify that there

are no shorts to ground.

Start the vehicle and turn the dashboard8.

lights on. LED should light up. Be ready to

disconnect battery if arcing or sparking oc-

curs at the meter.

To change the color of the LED light, push9.

the button on the face of the gauge.

Record Serial Number Here:

Note: If product has no serial number, record month and year of purchase instead.

Note: No replacement parts are available.

Ignition

Dashboard Light

Figure 1

Otros manuales de Herramientas de Harbor Freight Tools

Harbor Freight Tools

Harbor Freight Tools 59789 Instrucciones de montaje

Harbor Freight Tools

Harbor Freight Tools 91510 Manual de usuario

Harbor Freight Tools

Harbor Freight Tools OneStopGardens 91089 Manual de usuario

Harbor Freight Tools

Harbor Freight Tools 90360 Manual de usuario

Harbor Freight Tools

Harbor Freight Tools PITTSBURGH AUTOMOTIVE 56411 Instrucciones de montaje

Harbor Freight Tools

Harbor Freight Tools ICON 56683 Instrucciones de montaje

Harbor Freight Tools

Harbor Freight Tools 97028 Manual de usuario

Harbor Freight Tools

Harbor Freight Tools 42606 Guía de referencia rápida

Harbor Freight Tools

Harbor Freight Tools HAULMASTER 59665 Instrucciones de montaje

Harbor Freight Tools

Harbor Freight Tools DOYLE CARPENTERS VISE Instrucciones de montaje

Harbor Freight Tools

Harbor Freight Tools Pittsburgh 95122 Manual de lista de piezas

Harbor Freight Tools

Harbor Freight Tools MADDOX 1721C-B Instrucciones de montaje

Harbor Freight Tools

Harbor Freight Tools CEN-TECH 2458 Manual de usuario

Harbor Freight Tools

Harbor Freight Tools Pittsburgh 44983 Guía de referencia rápida

Harbor Freight Tools

Harbor Freight Tools Tidy-Up Organizer 02453 Manual de usuario

Harbor Freight Tools

Harbor Freight Tools 91670 Manual de usuario

Harbor Freight Tools

Harbor Freight Tools 95654 Manual de lista de piezas

Harbor Freight Tools

Harbor Freight Tools Central Pneumatic 97728 Manual de instalación

Harbor Freight Tools

Harbor Freight Tools PITTSBURGH AUTOMOTIVE 63391 Instrucciones de montaje

Harbor Freight Tools

Harbor Freight Tools 46499 Manual de usuario

Harbor Freight Tools

Harbor Freight Tools DOYLE Instrucciones de montaje

Harbor Freight Tools

Harbor Freight Tools 95878 Manual de lista de piezas

Harbor Freight Tools

Harbor Freight Tools Pittsburgh 64983 Manual del operador

Harbor Freight Tools

Harbor Freight Tools 95916 Manual de lista de piezas

Manuales populares de Herramientas de otras marcas

Martor

Martor SECUNORM 175 Manual de usuario

ERKCO

ERKCO 1000 Manual de usuario

jbc

jbc N4473 Manual de usuario

FEINMETALL

FEINMETALL FZWZ-SET-001 Manual de usuario

Worx Professional

Worx Professional Sonicrafter WU676 Manual de usuario

Gage Bilt

Gage Bilt GB713SH Manual de usuario

Hilti

Hilti DX 9-ENP Manual de usuario

norbar

norbar NORTRONIC 34399 Manual de usuario

BGS technic

BGS technic 8578 Manual de usuario

Makita

Makita DHR241 Manual de usuario

Motor Guard

Motor Guard JMB-1250 Manual de usuario

Power Adhesives

Power Adhesives 805-12 Manual de usuario

Clemco

Clemco 24189 Manual de usuario

VVG

VVG VNG 903 Series Manual de usuario

Hilti

Hilti FX 3-A Manual de usuario

Grizzly

Grizzly H6472 Manual de usuario

axing

axing BWZ 5-02 Manual de usuario

Dh-Robotics

Dh-Robotics RGI-100 Cómo utilizar