Harbor Freight Tools 56658 Instrucciones de montaje

Visit our website at: http://www.harborfreight.com

Email our technical support at: [email protected]

Owner’s Manual & Safety Instructions

Save This Manual Keep this manual for the safety warnings and precautions, assembly,

operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the

back of the manual near the assembly diagram (or month and year of purchase if product has no number).

Keep this manual and the receipt in a safe and dry place for future reference. 20c

When unpacking, make sure that the product is intact

and undamaged. If any parts are missing or broken,

please call 1-888-866-5797 as soon as possible.

No portion of this manual or any artwork contained herein may be reproduced in

any shape or form without the express written consent of Harbor Freight Tools.

Diagrams within this manual may not be drawn proportionally. Due to continuing

improvements, actual product may differ slightly from the product described herein.

Tools required for assembly an d se rv ic e may n ot b e in cl uded.

Read this material before using this product.

Failure to do so can result in serious injury.

SAVE THIS MANUAL.

Page 2 For technical questions, please call 1-888-866-5797. Item 56658

IMPORTANT SAFETY INFORMATION

1. Do not allow children younger than

age 8 to use this Drone. Children should

not operate without adult supervision.

2. Only fly outdoors during daylight hours in

an area with no obstructions, power lines,

vehicles, animals or people nearby.

3. Do not fly in wet or windy conditions.

4. Keep spectators and pets away. Spectators

should only watch from a safe distance.

5. Position remote control batteries in proper

polarity. Do not mix old and new batteries.

Do not mix alkaline, standard (carbon-zinc),

or rechargeable (nickel-cadmium) batteries.

Do not use swollen or leaking batteries.

6. Do not open the housing or

modify its design. Doing so may cause

damage and/or make it dangerous.

7. Do not use if parts are loose or damaged. If the

toy has been damaged, immediately stop using it.

8. People with pacemakers should consult their

physician(s) before use. Electromagnetic fields in

close proximity to heart pacemaker could cause

pacemaker interference or pacemaker failure.

9. The warnings, precautions, and instructions

discussed in this instruction manual cannot

cover all possible conditions and situations

that may occur. It must be understood by the

operator that common sense and caution are

factors which cannot be built into this product,

but must be supplied by the operator.

10. Maintain product labels and nameplates.

These carry important safety information.

If unreadable or missing, contact

Harbor Freight Tools for a replacement.

11. Contains Li-Ion battery. Battery must be

recycled or disposed of properly. Do not open,

crush, heat above 140°F or incinerate.

Lithium Battery Charging Safety

1. Do not leave Battery unattended while charging.

2. Battery charging should be done by adults only.

3. Use the supplied USB charging cable only.

4. Charge on non-flammable surface and

keep away from flammable items.

5. If battery-powered device has been damaged,

immediately stop use, unplug, and safely

move away from flammable materials.

6. Follow instructions for charging battery. DO

NOT charge longer than recommended.

7. Allow a clearance of at least 4″ on

all sides during charging.

Lithium Battery Safety Warnings

LITHIUM BATTERIES STORE

A LARGE AMOUNT OF ENERGY AND

WILL VENT FIRE OR EXPLODE IF MISTREATED:

1. Keep Battery Pack dry.

2. DO NOT DO ANY OF THE FOLLOWING

TO THE BATTERY PACK:

a. Open,

b. Drop,

c. Short-circuit,

d. Puncture,

e. Incinerate, or

f. Expose to temperatures greater than 265°F.

3. Charge Battery Pack only according

to its Charger’s instructions.

4. Inspect Battery Pack before every use;

do not use or charge if damaged.

Personal Safety

1. Operator and spectators must wear ANSI-

approved safety goggles during use.

2. Do not wear loose clothing or jewelry. Keep

hair and clothing, and away from moving

parts. Loose clothes, jewelry, or long

hair can be caught in moving parts.

3. Do not use the Drone while tired or

under the influence of drugs, alcohol, or

medications. A moment of interruption

can result in serious personal injury.

Page 3For technical questions, please call 1-888-866-5797.Item 56658

Set Up

Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document

including all text under subheadings therein before set up or use of this product.

TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION:

Switch the Remote Control OFF before performing any procedure in this section.

Charging Battery

CAUTION! Do not leave Drone unattended

while charging. Battery charging

should be done by adults only.

1. Make sure Drone and Remote Control are turned OFF.

2. Remove Battery from battery

compartment on back of Drone.

3. Plug Battery cable into the back of the USB Adapter.

USB

Adapter Battery

4. Plug the USB Adapter into a USB power source.

5. While Battery is charging, LED light on USB

Adapter is on. When fully charged, LED light

turns off. Charging takes approximately 1 hour.

6. When charging is complete, disconnect battery

from USB Adapter and power source.

Remote Control

1. Remove the screw securing the Battery Cover

on the back of the Remote Control.

Battery

Cover

2. Remove the Battery Cover and insert three AAA

batteries (sold separately) in the indicated polarity.

3. Replace Battery Cover and tighten screw securely.

CAUTION! Do not install old and new batteries

together. Do not install alkaline, carbon-

zinc or rechargeable batteries together.

Position batteries in proper polarity. Do

not use swollen or leaking batteries.

Specifications

Remote Control

Battery Type 3 – AAA (sold separately)

Drone Battery Type 3.7 V / 380 mAh rechargeable

Lithium-Polymer

Battery Charging Time 65 minutes

Flying Time Approximately 6 minutes

Range Up to 50 meters (about 150 feet)

Operating Frequency 2.4 GHz

Page 4 For technical questions, please call 1-888-866-5797. Item 56658

Controls

Stop

Button

Start

Button

Power

Button

Directional

Switch

FUNCTIONS

UP Press Directional Switch

down & tilt wrist upward

DOWN Press Directional Switch

down & tilt wrist downward

FORWARD Tilt wrist downward

BACKWARD Tilt wrist upward

TURN LEFT Pull Directional Switch

back & tilt wrist to the left

TURN RIGHT Pull Directional Switch

back & tilt wrist to the right

MOVE LEFT Tilt wrist to the left

MOVE RIGHT Tilt wrist to the right

FORWARD FLIP

See page 6

Push Directional Switch

up & tilt wrist downward

BACKFLIP

See page 6

Push Directional Switch

up & tilt wrist upward

LEFT FLIP

See page 6

Push Directional Switch

up & tilt wrist to the left

RIGHT FLIP

See page 6

Push Directional Switch

up & tilt wrist to the right

Page 5For technical questions, please call 1-888-866-5797.Item 56658

Operating Instructions

Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document

including all text under subheadings therein before set up or use of this product.

TO PREVENT SERIOUS INJURY: Operator below must wear ANSI-approved safety goggles

during use. Keep Drone within 328 feet of Remote Control. If Drone goes out of range, it will stop working

and fall.

WARNING! To prevent serious injury, avoid

sudden movements of controls while flying.

CAUTION! Only fly outdoors during daylight

hours in an area with no obstructions, power

lines, vehicles, animals or people nearby.

Pairing

1. Turn the Drone ON – the red and green LED lights

will flash. Place the Drone on a flat surface.

2. Turn Remote Control ON. Red Indicator

Light will flash twice then stay lit.

3. Drone LED lights will flash rapidly and then stay

lit, indicating the Drone and Remote are paired.

Speed Control

Drone speed is set to normal by default. To change to medium speed, push the Directional

Switch forward once. To change to high speed push the Directional Switch forward again .

To return to normal speed push the Directional Switch forward a third time.

Page 6 For technical questions, please call 1-888-866-5797. Item 56658

Maintenance

Procedures not specifically explained in this manual must be performed only by a qualified technician.

TO PREVENT SERIOUS INJURY FROM ELECTRICAL SHOCK:

Switch the Remote Control OFF and unplug the Battery from the Drone

before performing any procedure in this section.

1. BEFORE EACH USE, inspect the general

condition of the Drone. Check for:

• loose, misaligned body shell

• bent motor shafts

• cracked or broken rotors

• any other condition that may

affect its safe operation.

2. AFTER USE, use a mild detergent on a clean

cloth to remove any dirt from the Drone.

3. Remove batteries from Remote Control, then store

the Drone and accessories in a dry area away from

direct sunlight and out of the reach of children.

4. Li-Ion BATTERY MUST BE RECYCLED OR

DISPOSED OF PROPERLY.

Do not short, incinerate or open battery

PLEASE READ THE FOLLOWING CAREFULLY

THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST IN THIS DOCUMENT

AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY

REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO

MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS

OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES

THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND

LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY

ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS

THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.

Record Product’s Serial Number Here:

Note: If product has no serial number, record month and year of purchase instead.

Note: Some parts are listed and shown for illustration purposes only,

and are not available individually as replacement parts.

Page 7For technical questions, please call 1-888-866-5797.Item 56658

Parts List

Part Description Qty

1 Drone 1

2 Blade 2

3 Holder 4

4 USB Adapter 1

5 Remote Control 1

6 Screwdriver 1

7 Screw 4

8 Battery 1

26541 Agoura Road • Calabasas, CA 91302 • 1-888-866-5797

Limited 90 Day Warranty

Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards,

and warrants to the original purchaser that this product is free from defects in materials and workmanship for the

period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly,

to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper

installation, normal wear and tear, or to lack of maintenance. We shall in no event be liable for death, injuries

to persons or property, or for incidental, contingent, special or consequential damages arising from the use of

our product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the

above limitation of exclusion may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER

WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.

To take advantage of this warranty, the product or part must be returned to us with transportation charges

prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise.

If our inspection verifies the defect, we will either repair or replace the product at our election or we may

elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will

return repaired products at our expense, but if we determine there is no defect, or that the defect resulted

from causes not within the scope of our warranty, then you must bear the cost of returning the product.

This warranty gives you specific legal rights and you may also have other rights which vary from state to state.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause undesired operation.

Warning! Any changes or modifications not expressly approved by the party responsible for compliance could void

the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference

in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning the equipment

off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that

to which the receiver is connected.

• Consult Customer Service or an experienced radio/TV technician for help.

FCC ID:

2AK3Z-201906

The responsible party in the United States for compliance of the equipment is:

Harbor Freight Tools, 26541 Agoura Road, Calabasas, CA 91302

1-888-866-5797 • http://www.harborfreight.com

Tabla de contenidos

Otros manuales de Zumbido de Harbor Freight Tools

Harbor Freight Tools

Harbor Freight Tools 56814 Instrucciones de montaje

Manuales populares de Zumbido de otras marcas

Ryze

Ryze Tello Manual de usuario

PowerVision

PowerVision PowerRay Manual de usuario

Force1

Force1 rogue F72 Manual de usuario

Zerotech

Zerotech DOBBY Manual de usuario

Protocol

Protocol VIDEODRONE AP Manual de usuario

dji

dji Matrice M210 Manual de usuario

MAKE

MAKE Terry Kilby Manual de usuario

SYMA

SYMA X440 Manual de usuario

RUKO

RUKO F11 Manual de usuario

SYMA

SYMA X5UW(720P) Manual de usuario

Dynali

Dynali 25 H Guía

dji

dji PHANTOM 4 Manual de usuario

Atlas

Atlas AtlasPRO Manual de usuario

Twodots

Twodots TVVIN BOARD Manual de usuario

GDU

GDU SAGA Manual de usuario

Ares

Ares ETHOS QX 130 Manual de usuario

Walkera

Walkera ZHUN Manual de usuario

dji

dji WIND-4 Manual de usuario