LPR Quick Reference Guide | 6
3CONFIGURING YOUR CAMERA
3.1 Field of View
The below steps you will perform in the Wisenet camera conguration webpage
1Congure camera so left and right are correct, not mirrored.
2Set camera zoom to capture license plate at about 20% of the width of the image
3Adjust camera view angle so plate passes through the middle of the image.
NOTE: The area indicated is not stored. If you need to perform
a new Simple Focus, please draw a new area on-screen.
NOTE: The default username and password to access the camera settings are: 1) User Name: admin 2) Password: Same as the
MAC Address of the unit (numbers and uppercase letters only)3) Please change the default password at the first instance when you
access the camera settings. 4) Make sure to set correct date and time for the camera before going in to any additional settings.
3.2 Simple Focus on Plate Read Area
A unique feature of this camera allows you to select the
plate area and hit a button to perform a “Simple Focus” on
this plate area.
From the Video & Audio menu, select Focus Setup.
Click and drag to draw an area of focus where the
license plate is displayed.
6Click the Simple Focus button to initiate a focus
operation on the user-specied area.
Focus setup
