Hanshin Smart Thermal Detector Manual de usuario

Smart Thermal Detector

User Manual V1.5

Smart Thermal Detector User Manual V1.1

Smart Thermal Detector

User Manual

Smart Thermal Detector

User Manual V1.5

Smart Thermal Detector User Manual V1.1

Table of Contents

Table of Contents ...................................................................................................................... 2

Warning and Precaution............................................................................................................ 3

Packaging checklist.................................................................................................................... 3

Hardware Overview................................................................................................................... 4

User Interface Overview............................................................................................................ 5

Temperature Screening Procedure ........................................................................................... 6

Temperature Screening Hints.................................................................................................... 6

Thermal Detector Setting.......................................................................................................... 7

Android-related setting............................................................................................................. 9

CMS Cloud control system ...................................................................................................... 11

HANSHIN thermal: Mobile Application Notification ............................................................... 16

Local Record Exporting............................................................................................................ 19

Smart Thermal Detector

User Manual V1.5

Smart Thermal Detector User Manual V1.1

Warning and Precaution

○The operation temperature of Smart Thermal Detector is 10 - 40 ℃(50 –104 °F).

Using this machine in the extreme environment may cause damage to the machine

○When Smart Thermal Detector shows elevated temperature (Yellow or Red), adjust

the position to measure again / use another thermometer to measure the

temperature accurately. If you have other signs of illness, please consult your doctor

immediately

○Smart Thermal Detector is designed to be a rapid screening tool for temperature.

This product is not designed to diagnose any disease or as a substitute for the

consultation of the doctor

○Insert the power adapter fully into the main socket

○Do not touch the power adapter with wet hands

○Do not expose this machine to rain or excessive moisture. This machine must not be

exposed to dripping or splashing water

○Do not expose this machine to direct sunlight and other sources of heat

Packaging checklist

Smart Thermal Detector

Item

Description

Quantity

Smart Thermal Detector

DC12V Power Adapter

User manual

Smart Thermal Detector wall mount

Optional items

Smart Thermal Detector floor stands

Upon request

Smart Thermal Detector table stands

Upon request

Smart Thermal Detector

User Manual V1.5

Smart Thermal Detector User Manual V1.1

Hardware Overview

Front

Top and back side

Front

Back

Thermal Detector Sensor

DC Power Input

Distance Sensor

3.5 mm Audio Out

Environmental Thermometer

Micro-SD Card Slot

Optical Sensor

USB Port

10.2 inch LED display

USB Port

NFC Sensor

RJ45 LAN Port

Power on / off button

Smart Thermal Detector

User Manual V1.5

Smart Thermal Detector User Manual V1.1

User Interface Overview

Temperature Detection Standard

Temperature Detection Area

Local Exporting

Date & Time

NFC Card information

Setting

Smart Thermal Detector

User Manual V1.5

Smart Thermal Detector User Manual V1.1

Temperature Screening Procedure

1. Tap NFC card on the NFC Sensor if you would like to record detection with

your detection (if applicable)

2. Move your head towards the Smart Thermal Detector until your face covered

most area of the human-shaped frame of the detection area (around 50 cm

distances between the forehead and the machine). Detection area will show a

scanning animation when the distance is appropriated. If no scanning

animation is shown, move your head closer to the machine. The Screening

will start immediately once the animation is shown

3. Wait for 1 second until the display shows the screening result

4. The display shows below screening result regarding the use of body

temperature

Temperature Screening Hints

To ensure temperature screening result accurate, please avoid below environmental factors:

Factors

Effect

Room Temperature Too High / Low

Deviations will be found in

Measuring results

Obstruction found between the forehead and the

measuring machine

Measure unsuccessfully

Measuring too far

Inaccurate measuring results

32˚C - 37.3˚C

(89.6˚F - 99.1˚F)

Green

Normal Body Temperature

37.4˚C - 38˚C

(99.2˚F - 100.4˚F)

Yellow

Moderate Fever

38.1˚C - 42˚C

(100.5˚F - 107.6˚F)

Red

High Fever

Temperature a bit low

Recommend to take off glasses

and retry

Temperature too low

The measurement may be done

incorrectly / interference found

Please retry

Temperature too low

The measurement may be done

incorrectly / interference found

Please retry

Smart Thermal Detector

User Manual V1.5

Smart Thermal Detector User Manual V1.1

Users should avoid measuring temperature in the cases below, wait for 20 minutes before

measuring the temperature.

Situation

Effect

After intense exercise

Measure result will be high

After hot bath

Measure result will be high

After long time exposure to directly sunlight

Measure result will be high

Wearing too many clothes / not enough clothes

Measure result will be high/low

Thermal Detector Setting

Connect USB Mouse to the Smart Thermal Detector for detail settings of the software.

Consult your ITAdministrator before the setting

Click the setting icon by moving the mouse

cursor with your connected mouse.

The configuration page will be shown

immediately.

Basic Setting

1. Capture photo when body temperature

detected exceed 37.3˚C/ 99.1˚F

By enabling this function, a photo will be

captured when abnormal body temperature is

detected (e.g. Yellow and Red)

2. Capture photo when body temperature

detected successfully

By enabling this function, a photo will be

captured after the detection no matter what

the result is

3. Enable smart camera detection

By enabling this function, smart camera can

detect human faces

4. Enable fast detection

1 second fast detection is enabling

5. Enable body temperature measurement after

tagged NFC card

By enabling this function, the measurement

will only start after users tap their NFC card

Smart Thermal Detector

User Manual V1.5

Smart Thermal Detector User Manual V1.1

6. Display 24H

Change display of 12H into 24H

7. Display MM/DD/YYYY

Change display of DD/MM/YYYY into

MM/DD/YYYY

8. Display in ˚F(Degree Fahrenheit)

Change display of ˚C into ˚F

Advanced Setting

It is not necessary to set the advanced

configuration in normal usage. Please contact

your local supplier before making any of the

advanced settings.

1. Kiosk –Machine ID

Enter the Machine ID provided by your local

supplier. Make sure the machine is connected

to the internet before activating.

2. Cloud Server Address

Enter the CMS web address to connect to

the cloud platform. This value is usually

pre-configured and not necessary to

configure.

Smart Thermal Detector

User Manual V1.5

Smart Thermal Detector User Manual V1.1

Android-related setting

Smart Thermal Detector is running in Android platform. Besides those settings in the smart

thermal detector software, there are some basic settings to be set in Android.

Connecting to Wi-Fi network

Smart Thermal Detector supports connecting to the internet with both Wi-Fi and LAN. Before

using the Smart Thermal Detector, it is required to set the internet settings in the Android

system.

Connect the mouse to Smart Thermal Detector,

right-click the mouse to exit the Smart Thermal

Detector software to go to the Home screen of the

Android system.

Click on the setting to enter the Android settings.

Enter Wi-Fi settings.

Select and enter the required information to

connect to the Wi-Fi network.

Smart Thermal Detector

User Manual V1.5

Smart Thermal Detector User Manual V1.1

Adjust the Sound volume

InAndroid settings, go into the Volume settings.

Adjust the sound volume of the machine. It is not

recommended to adjust to higher than 90%

volume.

Tabla de contenidos

Manuales populares de Controladores de temperatura de otras marcas

Swegon

Swegon LUNAd MB Manual de usuario

Lucky Reptile

Lucky Reptile Thermo Control II Manual de usuario

SENSORMETRIX

SENSORMETRIX Argon 100 Manual de usuario

Fuji Electric

Fuji Electric PXE4 Manual de usuario

Yuyao gongyi

Yuyao gongyi XMT-808 series Manual de usuario

Selec

Selec TC544C Manual de usuario

P.W. KEY

P.W. KEY rt-208gt Manual de usuario

Future Design

Future Design FDC-9200 Manual de usuario

BH Thermal

BH Thermal BriskONE Manual de usuario

Omron

Omron E5EX-H Manual de usuario

West Control Solutions

West Control Solutions KS 45 Guía de inicio rápido

MCS

MCS RITC-15B Manual de usuario

SMC Networks

SMC Networks Thermo-con INR-244-639 Manual de usuario

eltherm

eltherm Ex-TC It Series Manual de usuario

Omron

Omron C200H-TV Series Manual de usuario

industrie technik

industrie technik CA1 Manual de usuario

KRAL

KRAL EET 32 Manual de usuario

dixell

dixell XR420C Diagrama de cableado