HS-429 USER GUIDE
2 QM034 Issue 3
An instruction is indicated by "►":
Example: ►Check whether the unit operates correctly.
Important note
Non-compliance can result in malfunctions or interference
Information
Supplementary note
1. SAFEY INSTRUCTIONS
•Please read the product description prior to set-up of the unit Ensure that the product is
suitable for your application without any restrictions
•The unit conforms to the relevant regulations and EC directives.
•Improper or non-intended use may lead to malfunctions of the unit or to unwanted effects
in your application
•That is why installation, electrical connection, set-up, operation and maintenance of the
unit must only be carried out by qualified personnel authorised by the machine operator
2. FUNCTIONS AND FEATURES
The vibration sensor detects the vibration in the system (measured / evaluated physical unit =
vibration velocity) This is converted into an analogue signal at the current output The
switching output behaviour is determined using the two setting rings
3. INSTALLATION
►Mount only in a thick housing wall (e.g. transport thread).
►Ensure that the signal direction is correct
►Ensure a safe vibration transmission and allow no elastic intermediate layers
►Tighten the sensor with a tightening torque of 15 Nm
