Operating Manual
VARIOhab measuring system
73503 - 73509
_^|MTPRMPKMM|bk
====^äÄÉêí=e~åÇíã~åå=^êã~íìêÉåÑ~Äêáâ=dãÄe=C=`çK=hd= 2011-07-15 5 / 12
Danger – endangerment caused by product-specific and process-specific
conditions!
If the process housing is opened or the
measuring sensor is disassembled without
relieving the piping system pressure first, it
may result in burns, scalding or chemical
burns.
If the measuring system in a piping system is
operated with acidic or alkaline media, your
hands and fingers may suffer chemical burns
during disassembly.
If the measuring system in a piping system is
operated with hot media, the surface
temperature of the process housing can also
reach this value.
oMake sure that the piping
system pressure has been
relieved.
oMake sure that the piping
system has been rinsed
and emptied.
oMake sure that the piping
system has cooled to a value
below 50 °C before carrying
out assembly tasks.
Caution – danger zone – Malfunction due to incorrect handling!
If the measuring system is not checked or
serviced at regular intervals, it may not work
properly.
Check and maintain the
measuring system regularly.
The measuring system may not work any longer
or malfunction considerably if faulty or non-
specified parts are installed on it.
Only use parts approved by the
manufacturer.
The range of application of the measuring
system
is intended for specific operating states
(pressure, temperature, media.
Make sure of
proper application.
3. Delivery and Performance, Storage
Check the information on the delivery note for correctness and check the delivery for completeness. Later
complaints will not be accepted.
Conduct a visual inspection for transport damage. The forwarding agent must be informed of any visible
damages immediately (comment on the waybill).
Claims due to transport damage not visible right away must be made to the forwarding agent within a week.
Store the delivery in dry rooms and, if possible, in the original packaging to protect it against external
factors.
