H&S 6116 Manual de usuario
Revision#00
6116 Ser. #510001
Manufactured By
H&S MANUFACTURING CO.,INC.
P.O. BOX 768 (715) 387-3414 FAX (715) 384-5463
MARSHFIELD, WISCONSIN 54449
HSMFG0615 Part #70196
WARNING
READ AND UNDERSTAND THIS MANUAL
BEFORE OPERATING THIS EQUIPMENT.
UNSAFE OPERATION OR MAINTENANCE OF
THIS EQUIPMENT CAN RESULT IN SERIOUS
INJURY OR DEATH.
6116
OPERATOR’S MANUAL
FLEX-FRAME
RAKE
CONTENTS
Warranty & Warranty Registration Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
ManufacturersStatement.. .. .. .. .. .. .. . . . .. .. .. .. .. .. .. .. . . . .. .. .. .. .. .. .. ... .. .. .. . . 2
DealerPre-Delivery Checklist. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. 3
DealerDelivery Checklist. .. .. .. .. .. .. .. .. . . . .. .. .. .. .. .. .. .. .. .. .. .. .. . . . . . . .. . . . .. .. 5
SafetyInformation -BeAlertSymbol. .. .. .. .. . . . . . .. .. .. .. .. .. .. .. .. .. . . . . . .. .. ... .. .. .7
SafetyInformation - Explanationof SafetySigns. ... ... ... ... .. . .. . .. ... ... ... ... ... ... .. . 8
Safety Decals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
SafetyInformation-Warning-Owner Must ReadandUnderstand......... .......... ........10
CapScrewTorqueValues .. . .. .. .. ... .. .. .. . .. .. .. .. . .. .. .. ... .. .. .. . .. .. .. ... .. .. . .. 11
Set-up&Assembly. .. . .. .. .. . .. .. .. . .. .. ... .. .. ... .. .. . .. .. .. . .. .. ... .. .. . .. .. .. . .. .12
Transporting. .. . .. ... .. ... .. . .. .. . .. ... .. ... .. ... .. . .. .. . .. ... .. ... ... .. ... .. ... .. . .13
Preparingfor Operation. . .. .. ... .. .. . .. .. . .. .. ... .. .. . .. .. ... .. ... .. .. . .. ... .. .. . .. .. 14
Operation& Adjustments. .. . .. .. .. .. .. . .. .. .. .. .. .. . .. .. .. .. .. . .. .. .. .. .. . ... .. .. 15-16
OptionalEquipment .. .. . .. .. .. .. . .. .. .. .. . .. .. .. .. . .. .. .. .. . .. .. .. ... .. .. .. ... .. .. .. 17
LubricationGuide .. .. . .. .. .. .. . .. .. .. .. . .. .. .. .. . .. .. .. .. . .. .. .. ... .. .. .. .. .. .. .. 18-19
DecalLocation .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. . . . . . . . . 20-25
TroubleShooting .. . .. ... .. ... .. . .. .. . .. ... .. ... .. ... .. . .. .. . .. ... .. ... .. . .. ... .. ... .26
Service Notes . . .. . . . . . . .. . . . . . . .. . . .. . . . . . . . .. . . . . . . .. . . . . . . . .. . . . . . . . .. . . . . . . .. 27-28
-3-
(Remove Dealers File Copy At Perforation)
DEALER PRE-DELIVERYCHECK LIST
AFTER COMPLETION, DEALER SHOULD REMOVEAND RETAIN FOR RECORDS
After the rake has been completely set-up, check to be certain it is in correct operating order before
delivering to the customer. The following is a list of points to inspect. Check off each item as you
have made the proper adjustments and found the item operating satisfactorily.
Rake was not damaged in shipment. Check for dents and loose or missing parts.
Report damage immediately to H&S Manufacturing Co., Inc.
Rake has been correctly assembled according to instructions in this manual. Wheel
nuts and all other fasteners are tightly secured.
All bolts and fasteners are tight.
All grease fittings have been lubricated. See Lubrication Chapter of this manual for
details.
Hoses and fittings are properly attached and there are no visible leaks.
All mechanisms are operating trouble free.
Rake wheels touch ground in unison when lowered into position. (Rake setting level)
Wheels are properly mounted.
Tires are inflated to correct pressure.
Decals are in place and legible.
ModelNumber
Serial Number
Dealer’s Name
Inspection Date
Signature of Pre-Delivery Inspector
IntentionallyLeftBlank
-4-
DEALER DELIVERYCHECK LIST
AFTER COMPLETION, DEALER SHOULD REMOVEAND RETAIN FOR RECORDS
This check list that follows is an important reminder of valuable information that should be passed
on to the customer at the time this Rake is delivered.
Check off each item as you explain it to the customer.
This delivery check list, when properly filled out and signed assures the customer that the
Pre-deliveryservice was satisfactorily performed.
Explaintothecustomerthatthepre-delivery inspection was made.
Explainto thecustomerall thesafety precautions theymust exercise whenoperating
thisunit.
Explainraking and windrow width adjustments.
Explain to customer that regular lubrication is required for proper operation and long life of
machine.
Show customer the lubrication section of Owner’s Manual.
Give the customer Owner’s Manual and make sure they read and understand all operating
andservice instructions.
Have the customer sign a completed “Warranty Registration”, and mail it.
Date Delivered
Dealer’s Name
By
Signature of Original Buyer
Note: Warranty is not valid until warranty card is completed and returned to H&S Mfg. Co., Inc.
-5-
(Remove Dealers File Copy At Perforation)
IntentionallyLeftBlank
-6-
-7-
SAFETY INFORMATION
BE
ALERT! YOURSAFETY
ISINVOLVED.
THIS SYMBOL IS USED THROUGHOUT THIS BOOK WHENEVER YOUR PERSONAL SAFETY
IS INVOLVED. TAKE TIME TO BE CAREFUL. REMEMBER: THE CAREFUL OPERATOR IS THE
BEST OPERATOR. MOST ACCIDENTS ARE CAUSED BY HUMAN ERROR. CERTAIN
PRECAUTIONS MUST BE OBSERVED TO PREVENT THE POSSIBILITY OF INJURY OR
DAMAGE.
H&S MANUFACTURING CO., INC.
RECOGNIZE SAFETY INFORMATION
This is the safety-alert symbol. When you see this symbol
on your machine or in this manual, be alert to the potential
for personal injury.
Follow recommended precautions and safe operating
practices.
UNDERSTAND SIGNAL WORDS
Asignalword; DANGER, WARNING, or CAUTION-is used
with the safety-alert symbol. DANGER identifies the most
serious hazards.
Safety signs with signal word DANGER or WARNING are
typically near specific hazards.
General precautions are listed on CAUTION safety signs.
FOLLOW SAFETY INSTRUCTIONS
Carefully read all safety messages in this manual, and all safety signs on your machine. Follow all
recommended precautions and safe operating procedures.
Keep signs in good condition. Immediately replace any missing or damaged signs.
-8-
SAFETYINFORMATION
OBSERVE MAXIMUM TRANSPORT SPEED
The maximum transport speed for this implement is 32 km/h (20 m.p.h.).
Some tractors are capable of operating at speeds that exceed the maximum
transport speed of this implement. Regardless of the maximum speed capability
of the tractor being used to tow this implement, do not exceed the implement’s
maximum transport speed.
Exceeding the implements maximum transport speed can result in:
* Loss of control of the tractor/implement combination
* Reduced or no ability to stop during braking
* Implement tire failure
* Damage to the implement structure or its components
Use additional caution and reduce speed when towing under adverse surface
conditions, when turning, and when on inclines.
Do not attempt transport if the fully loaded implement weighs more than 1.5 times
the weight of the tractor.
Tabla de contenidos
Otros manuales de Maquinaria agrícola de H&S
H&S
H&S H D 7+4 FEEDER BOX Instrucciones de instalación y mantenimiento
H&S
H&S BW1000 LINEWRAP BW1000 LINEWRAP Manual de usuario
H&S
H&S HT8 Manual de usuario
H&S
H&S HDNR 7+4 Manual de usuario
H&S
H&S GM 170 Instrucciones de instalación y mantenimiento
H&S
H&S WIDE BODY Instrucciones de instalación y mantenimiento
H&S
H&S FF6118 Manual de usuario
H&S
H&S LW1100 Manual de usuario
H&S
H&S GM 170 Instrucciones de instalación y mantenimiento
H&S
H&S HI-DUMP 9215 Manual de usuario
Manuales populares de Maquinaria agrícola de otras marcas
GSi
GSi PNEG-2314 Manual de usuario
Checchi & Magli
Checchi & Magli TEXDRIVE Manual de usuario
Amazone
Amazone Cenius 4003-2TX Manual de usuario
MASSEY FERGUSON
MASSEY FERGUSON MF 9313S Manual de usuario
Cima
Cima BLITZ Instrucciones de funcionamiento y mantenimiento
Amazone
Amazone CombiDisc 3000 Instrucciones de instalación
