HAMPTON BAY BROOKHURST YG268-WH Manual de usuario

Item #756-450

USE AND CARE GUIDE

Questions, problems, missing parts? Before returning to the store call

Hampton Bay Customer Service

8 a.m. - 6 p.m., EST, Monday-Friday

1-877-527-0313

HAMPTONBAY.COM

BROOKHURST 52 INCH CEILING FAN

Model #YG268-WH

THANK YOU

Table of Contents ..........................................................

Safety Information .........................................................

Warranty .........................................................................

Pre-installation ..............................................................

Speciﬁcations ..........................................................................

Tools Required .........................................................................

Hardware Included ..................................................................

Package Contents ...................................................................

Dual Mounting Instruction .......................................................

Installation .....................................................................

Assembly .......................................................................

Standard Ceiling Mounting ......................................................

Close-to-Ceiling Mounting .....................................................

Hanging the Fan ....................................................................

Attaching the Fan Blades ......................................................

Installing the Light Kit ...........................................................

Operation ......................................................................

Remote Control Operating Instructions ..................................

Installing the Remote Control Holder .....................................

Reverse Switch Operating Instructions ..................................

Care and Cleaning .......................................................

Troubleshooting ..........................................................

Service Parts ...............................................................

Table of Contents

Safety Information

1. To reduce the risk of electric shock, ensure electricity has

been turned off at the circuit breaker or fuse box before

beginning.

2. All wiring must be in accordance with the National Electrical

Code “ANSI/NFPA 70-1999” and local electrical codes.

Electrical installation should be performed by a qualiﬁed

licensed electrician.

3. The outlet box and support structure must be securely

mounted and capable of reliably supporting a minimum of 35

lbs. Use only CUL Listed outlet boxes marked “FOR FAN

SUPPORT.”

4. The fan must be mounted with a minimum of 7 ft. clearance

from the trailing edge of the blades to the ﬂoor.

5. Avoid placing objects in the path of the blades.

6. To avoid personal injury or damage to the fan and other

items, be cautious when working around or cleaning the fan.

7. Do not use water or detergents when cleaning the fan or fan

blades. A dry dust cloth or lightly dampened cloth will be

suitable for most cleaning.

8. After making electrical connections, spliced conductors

should be turned upward and pushed carefully up into the

outlet box. The wires should be spread apart with the

grounded conductor and the equipment-grounding conductor

on one side of the outlet box and ungrounded conductor on

the other side of the outlet box.

9. All setscrews must be checked and retightened where

necessary before installation.

3 HAMPTONBAY.COM

Please contact 1-877-527-0313 for further assistance.

WARNING: To reduce the risk of electrical shock or ﬁre, do

not use this fan with any solid-state fan speed control device.

It will permanently damage the electronic circuitry.

WARNING: To reduce the risk of personal injury, do not

bend the blade arms (also referred to as ﬂanges), when

installing the brackets, balancing the blades or cleaning the

fan.

WARNING: Do not insert foreign objects in-between

rotating fan blades.

WARNING: To reduce the risk of ﬁre, electric shock or

personal injury, mount the fan to the outlet box marked

acceptable for fan support with the screws provided with the

outlet box.

NOTE: Canada's Ofﬁce of Energy Efﬁciency requires this fan to be

equipped with a 190 watt limiting device. If lamping exceeds 190

watts, the ceiling fan's light kit will shut off automatically.

CAUTION: To reduce the risk of personal injury, use only

the screws provided with the outlet box.

52 in

Low

Medium

High

120

0.32

0.40

0.49

15.72

28.04

57.27

122

179

1960.35

2852.68

4326.29

Fan size

Watts

RPM

CFM

Speed

Volts

Amps

7.74 kgs

(17.07 lbs.)

8.49 kgs

(18.73 lbs.) 1.70 cuft

N.W.

G.W.

C.F.

SPECIFICATIONS

TOOLS REQUIRED

Phillips

screwdriver

Electrical

Tape

Wire

stripper

Flat blade

screwdriver

Step

ladder

Pre-InstallationPre-Installation

NOTE: These are approximate measures. They do not

include amps and wattage used by the light kit.

Warranty

We warrant the fan motor to be free from defects in workmanship and material present at time of shipment from the factory for a period

of lifetime after the date of purchase by the original purchaser. We also warrant that all other fan parts, excluding any glass or acrylic

blades, to be free from defects in workmanship and material at the time of shipment from the factory for a period of one year after the

date of purchase by the original purchaser. We agree to correct such defects without charge or at our option replace with a comparable or

superior model if the product is returned. To obtain warranty service, you must present a copy of the receipt as proof of purchase. All

costs of removing and reinstalling the product are your responsibility. Damage to any part such as by accident, misuse, improper installa-

tion or by afﬁxing any accessories, is not covered by this warranty. Because of varying climatic conditions this warranty does not cover

any changes in brass ﬁnish, including rusting, pitting, corroding, tarnishing or peeling. Brass ﬁnishes of this type give their longest useful

life when protected from varying weather conditions. A certain amount of “wobble” is normal and should not be considered a defect.

Servicing performed by unauthorized persons shall render the warranty invalid. There is no other express warranty. We hereby disclaim

any and all warranties, including but not limited to those of merchantability and ﬁtness for a particular purpose to the extent permitted by

law. The duration of any implied warranty which cannot be disclaimed is limited to the time period as speciﬁed in the express warranty.

Some states do not allow limitation on how long an implied warranty lasts, so the above limitation may not apply to you. The retailer shall

not be liable for incidental, consequential, or special damages arising out of or in connection with product use or performance except as

may otherwise be accorded by law. Some states do not allow the exclusion of incidental or consequential damages, so the above

exclusion or limitation may not apply to you. This warranty gives speciﬁc legal rights, and you may also have other rights which vary from

state to state. This warranty supersedes all prior warranties. Shipping costs for any return of product as part of a claim on the warranty

must be paid by the customer.

Contact the Customer Service Team at 1-877-527-0313 or visit www.hamptonbay.com.

Mounting hardware

Blade attachment hardware

Blade arm screws

Plastic wire nut

Balance kit (not to scale)

Light holder thumbscrews (preassembled)

Receiver (not to scale)

Remote control (not to scale)

Remote control holder (not to scale)

Remote control holder mounting screws

Remote control holder plugs (preassembled)

Mounting bracket hardware (preassembled)

Clevis pin (preassembled)

Cotter pin (preassembled)

Collar setscrews (preassembled)

Collar mounting screws with lock washers (preassembled)

Light kit mounting screws (preassembled)

12V MN21/A23 battery (not to scale)

Part

Description

Quantity

5 HAMPTONBAY.COM

Please contact 1-877-527-0313 for further assistance.

Pre-Installation (continued)

HARDWARE INCLUDED

NOTE: Hardware shown to actual size unless noted

otherwise in the table below.

PACKAGE CONTENTS

Part

Description

Fan motor assembly

Blades

Blade arms

Light kit

Glass shades

Part

Quantity

Description

Mounting bracket (preassembled)

Canopy ring

Canopy

Canopy bottom cover

Hanger ball/downrod assembly

Pre-Installation (continued)

DUAL MOUNTING INSTRUCTIONS

7 HAMPTONBAY.COM

Please contact 1-877-527-0313 for further assistance.

This ceiling fan is supplied with two types of hanging assemblies: the

standard ceiling installation using the downrod with ball and socket

mounting, and the "close-to-ceiling" mounting. The "close-to-ceiling"

mounting is recommended in rooms with less than 8-foot ceilings or in

areas where additional space is desired from the ﬂoor to

the fan blades.

When using the standard downrod installation, the distance from the

ceiling to the bottom of the fan blades will be approximately 12 inches.

The "close-to-ceiling" installation reduces the distance from the ceiling

to the bottom of the fan blades to approximately 9 inches.

Once you have decided which ceiling installation you will use, refer to

the corresponding sections and procedures during the assembly period.

Where necessary, each section of the instructions will note the different

procedures to follow for the two types of installation. Standard Ceiling Mounting

Close-to-Ceiling Mounting

If your ceiling fan does not have an existing CUL-listed mounting

box, then install one using the following instructions:

□ Disconnect the power by removing the fuses or turning off

the circuit breakers.

□ Secure the outlet box (SS) (not included) directly to the

building structure. Use appropriate fasteners and materials

(not included). The outlet box and its bracing must be able

to fully support the weight of the moving fan (at least 35

lbs.). Do not use a plastic outlet box.

The illustrations below show three different ways to mount the

outlet box (SS) (not included).

WARNING: To reduce the risk of ﬁre, electric shock, or

personal injury, mount the fan to an outlet box marked

acceptable for fan support using the screws provided with the

outlet box. An outlet box commonly used for the support of

lighting ﬁxtures may not be acceptable for fan support and

may need to be replaced. If in doubt, consult a qualiﬁed

electrician.

Installation

MOUNTING OPTIONS

To hang your fan where there is an existing ﬁxture but no ceiling

joist, you may need an installation hanger bar (VV) (not included)

as shown above.

NOTE: You may need a longer downrod to maintain proper

blade clearance when installing on a steep, sloped ceiling.

The maximum angle allowable is 18° away from horizontal. If

the canopy touches the downrod, then remove the decorative

canopy bottom cover and turn the canopy 180° before

attaching the canopy to the mounting plate.

Assembly — Standard Ceiling Mounting

9 HAMPTONBAY.COM

Please contact 1-877-527-0313 for further assistance.

1Preparing the canopy 2Preparing the motor

□Remove the canopy ring (B) from the canopy (C).

□Remove the two non-slotted screws (LL) from the

canopy (C), and loosen the slotted screws (LL) on the

canopy (C).

□Remove the canopy (C) from the mounting bracket

(A) by turning the canopy (C) counterclockwise.

3Assembling the fan

□Route the wires exiting from the top of the fan motor

assembly (F) through the canopy ring (B). Ensure the

slot openings are on top.

□Route the wires through the canopy (C) and then

through the hanger ball/downrod assembly (E).

□Align the holes at the bottom of the hanger

ball/downrod assembly (E) with the holes in the collar

on top of the fan motor assembly (F). Carefully insert

the clevis pin (MM) through the holes in the collar

and the hanger ball/downrod assembly (E). Be careful

not to jam the clevis pin (MM) against the wiring

inside the hanger ball/downrod assembly (E).

WARNING: Failure to properly install the cotter pin (NN)

could result in the fan becoming loose and possibly falling.

NOTE: If a longer downrod is needed (not included), take

out the screw located in the hanger ball, lower the hanger

ball and remove the pin. Remove all three pieces from the

downrod and assemble them onto the new longer downrod

before proceeding step 3.

□Remove the clevis pin (MM) and cotter pin (NN), and

loosen the two collar setscrews (OO) from the motor

collar.

□Insert the cotter pin (NN) through the hole near the

end of the clevis pin (MM) until it snaps into the

locked position.

□Tighten the two collar setscrews (OO) on top of the

fan motor assembly (F) ﬁrmly.

MM F

Assembly — Close-to-Ceiling Mounting

3Assembling the fan

Preparing the motorPreparing the canopy

□Remove the canopy ring (B) from the canopy (C).

□Remove the two non-slotted screws (LL) from the

canopy (C), and loosen the slotted screws (LL) on the

canopy (C).

□Remove the canopy bottom cover (D) from the

canopy (C) by turning the canopy bottom cover (D)

counterclockwise.

□Remove three of the six collar mounting screws with

lock washers (PP) (every other one) from the collar on

top of the fan motor assembly (F).

WARNING: Failure to completely tighten the three collar

mounting screws (PP) could result in the fan becoming loose

and possibly falling.

□Route the wires exiting from the top of the fan motor

assembly (F) through the canopy ring (B).

□Make sure the slot openings are on top, and then

proceed to place the canopy over the collar at the top

of the fan motor assembly.

□Align the mounting holes in the bottom of the canopy

bly (F), and fasten using the three collar mounting

screws with lock washers (PP) previously removed.

□Tighten the collar mounting screws (PP) securely.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Admirador de HAMPTON BAY

HAMPTON BAY

HAMPTON BAY Redington 740-125 Manual de usuario

HAMPTON BAY

HAMPTON BAY AG524I-ORB Manual de usuario

HAMPTON BAY

HAMPTON BAY Carrison 499 461 Manual de usuario

HAMPTON BAY

HAMPTON BAY Umber Manual de usuario

HAMPTON BAY

HAMPTON BAY DANETREE N243A-BN Manual de usuario

HAMPTON BAY

HAMPTON BAY CLARET Manual de usuario

HAMPTON BAY

HAMPTON BAY METARIE II 24 Manual de usuario

HAMPTON BAY

HAMPTON BAY 803-548 Manual de usuario

HAMPTON BAY

HAMPTON BAY WELLSTON EF200B-44 Manual de usuario

HAMPTON BAY

HAMPTON BAY Wellston Manual de usuario

HAMPTON BAY

HAMPTON BAY Savona Tiffany Manual de usuario

HAMPTON BAY

HAMPTON BAY GAZEBO III YG988-BN Manual de usuario

HAMPTON BAY

HAMPTON BAY Minuet III AG806C-EB Manual de usuario

HAMPTON BAY

HAMPTON BAY GLENDALE III AK338-MBK Manual de usuario

HAMPTON BAY

HAMPTON BAY SUSSEX II AL694LED-BN Manual de usuario

HAMPTON BAY

HAMPTON BAY CORWIN 56050 Manual de usuario

HAMPTON BAY

HAMPTON BAY STONERIDGE 51973 Manual de usuario

HAMPTON BAY

HAMPTON BAY 9100 Manual de usuario

HAMPTON BAY

HAMPTON BAY 420-420 Manual de usuario

HAMPTON BAY

HAMPTON BAY YG419-WH Manual de usuario

HAMPTON BAY

HAMPTON BAY Farmington Manual de usuario

HAMPTON BAY

HAMPTON BAY 55370 Manual de usuario

HAMPTON BAY

HAMPTON BAY Lyndhurst Manual de usuario

HAMPTON BAY

HAMPTON BAY SINCLAIR Manual de usuario

Manuales populares de Admirador de otras marcas

ELTA FANS

ELTA FANS H03VV-F Manual de usuario

Hunter

Hunter 20714 Manual de instrucciones

Emerson

Emerson CARRERA VERANDA CF542ORB00 Manual de usuario

Hunter

Hunter Caraway Manual de instrucciones

Panasonic

Panasonic FV-15NLFS1 Manual de usuario

Kompernass

Kompernass KH 1150 Manual de usuario

VES

VES FALA100/12V/TR Manual de usuario

Vertiv

Vertiv Liebert DCD Manual de usuario

Westinghouse

Westinghouse GFP Series Manual de usuario

Venmar

Venmar KUBIX HRV PLUS Series Manual de usuario

Maico

Maico ECR 31 Manual de usuario

Sonnenkonig

Sonnenkonig Dinky Manual de usuario

S&P

S&P ECOWATT HXBR Manual de usuario

Wider

Wider IMP03369BH Manual de usuario

Panasonic

Panasonic F-60DHN Manual de usuario

Hinkley

Hinkley HIGHLAND Manual de usuario

Broan

Broan 766BN Manual de usuario

Premium

Premium PFS16022 Instrucciones de montaje