Halfords Bicycle Computer Manual de usuario

wireless computer

owner’s manual

80mm x 110mm

Black

Contents

Package Contents .......................................3

Using Your Computer...................................

1.Main Unit Setup ........................................................4

1. Initiation of Main Unit

2. Basic Display Modes

2. Overview of Button Operation...............................5

1. In Data Setting Mode

2. In General Mode

3. In Altitude Calibration Mode

3. Wheel Circumference Measurement ..................8

4. Basic Setting & Operation ...................................10

5. General Display.....................................................14

6. Battery Replacement............................................15

7. General Mode Display ..........................................16

8. About Altitude Calibration ...................................17

9. Temperature Display ............................................18

10. Bike 1 /Bike 2 Selection......................................18

11. Data Reset............................................................19

12. EL Backlight.........................................................20

13. Sleep Mode ..........................................................20

Functions.....................................................21

Technical Specifications ............................27

General Specifications................................29

Precautions .................................................30

Trouble Shooting ........................................31

Package Contents

1. MAIN UNIT

Main unit

3V battery (CR2032)

2. BRACKET SET

Bracket for handlebar or stem

Bracket base

Cable ties

3. SPEED TRANSMITTER SET

Speed transmitter

3V battery (CR2032)

Transmitter rubber pad

Cable ties

Magnet set

O-ring

4. CADENCE TRANSMITTER SET

Cadence transmitter

3V battery (CR2032)

Transmitter rubber pad

Cable ties

Magnet set

O-ring

1.The installation of the accessories is on the separate sheet.

2.The accessories or parts are subject to change without prior

notice.

Using Your Computer

1.Main Unit Setup

1. Initiation of Main Unit:

1. Before normal operation, initiate the main unit and select units

as stated below:

1-1. Push buttons A, B, C simultaneously for 3 seconds, and

you'll see the auto-testing display.

1-2. Press any button to quit auto-testing display, and then

select units of temperature, altitude and distance.

1-3. Press the C button to quit unit selection and enter

General Mode.

2. Timing to initiate the main unit and select units is as listed

below:

2-1. The first time when you use the computer

2-2. When the display becomes irregular due to improper use

2-3. Whenever you change the battery

2. Basic Display Modes:

After initiating the computer, selecting units, you should enter

Data Setting Mode to set some basic data like wheel

circumference and clock time etc. Then go to General Mode for

normal operation.

Before riding, you should enter Altitude Calibration Mode to

calibrate the current altitude value.

The following is the General Mode Display during riding for

reference:

2. Overview of Button Operation

This computer includes three major display modes as shown below:

Data Setting Mode, General Mode, and Altitude Calibration Mode.

In this section, you'll learn the function of each button in each mode.

The following text lets you know how to use the buttons to operate

the computer step by step.

1. In Data Setting Mode:

Tips: 1. The buttons you'll use in Data Setting Mode: A, B, C.

2. Button for entering or quitting Data Setting Mode: C

3. Button for changing the value of a flickering digit: A

4. Button for switching to the next digit or setting: B

Button A:

1. Press the A button to change the value of a

flickering digit in a loop.

2. If you keep pushing the A button, the digit value will

automatically increase.

3.Release the A button when the required value of a

digit is displayed.

Button B:

1. Press the B button to move to the next digit in a

loop.

2. Push the B button for 1 second to move to the next

setting.

Button C: 1. In General Mode, press the C button to enter Data

Setting Mode.

2.In Data Setting Mode, press the C button to exit and

return to General Mode.

Button D: No function.

How do you enter Data Setting Mode after initiating the computer?

After initiating the computer by pressing the A, B, C buttons at the same

time for 3 seconds, press any button to quit auto-testing display, and

then select units. After unit selection, press the B button for 2 seconds

to enter Data Setting Mode.

2. In General Mode:

Tips:

1. The buttons you'll use in General Mode: A, B, C, D

2. Button for changing the function display: A

3. Button for resetting the trip data: A (3's)

4. Button for entering Data Setting Mode: C

5. Buttons for entering Altitude Calibration Mode: A+B (3's)

Button A:

1. Press the A button to move to the next function

display.

2. Press the A button for 3 seconds, and you will

reset the following data:

AVG SPD, MAX SPD, DST, RTM, ALT, MAX ALT,

AVG RPM, MAX RPM.

Button B: 1. Press the B button to turn on the EL backlight.

2. Press the B button for 1 second, and the

temperature will be displayed.

Button C:

Press the C button, and you'll enter Data Setting

Mode.

Buttons A+B: Push both buttons for 3 seconds, and you'll enter

Altitude Calibration Mode.

Button D:

Press the D button to switch to Bike 1 or Bike 2.

3. In Altitude Calibration Mode:

Tips:

1.The buttons you'll use in Altitude Calibration Mode: A, B.

2.Buttons for entering or quitting Altitude Calibration Mode: A+B (3's)

Buttons for quickly resetting the current altitude to zero: A+B (1's)

Buttons A+B:

1. In General Mode, push A and B buttons for 3

seconds to enter Altitude Calibration Mode.

2. In this mode, press A and B buttons at the same

time briefly, and the current altitude value will

return to zero. It's convenient for quick setting.

3. Push A and B buttons for 3 seconds to quit this

mode and return to General Mode.

Button A:

1. Press the A button to change the plus sign to

minus, or change the minus sign to plus.

2. Press the A button to change the value of a

flickering digit during setting.

Button B: Press the B button to move to the next digit in a

loop during setting.

About Altitude Calibration:

1. If you are aware of your home altitude or basis altitude before riding,you can

directly adjust the current altitude data after you enterthis mode.

2. If you do not know your basis altitude before riding or if you do not care

about the altitude of the starting point, you may return the current

altitude value to zero in the calibration mode by pressing both A and B

buttons at the same time briefly. In this way, the rider will still enjoy the

fun of learning the accumulated altitude gains during each ride.

3. Wheel Circumference

Measurement

To set the wheel circumference before riding, you should

measure the wheel circumference by yourself or just refer to the

Wheel Circumference Table as shown below:

How do you measure the wheel circumference

yourself?

Roll the wheel until the valve stem is closest to the ground and mark

the corresponding spot on the floor as the first point. Next, roll the

wheelforward until the valve stem is closest to the ground once again.

Mark the corresponding spot on the floor as the second point.

Then measure the distance between both points, using the unit of

millimeter. The distance equals your wheel circumference.

1.The default value of wheel circumference for Bike 1 is 2155mm;

that for Bike 2 is 2050mm. Enter the correct wheel

circumference into the computer in Data Setting Mode.

2.Refer to pages 10 and 11 about basic setting to set your wheel

circumference.

4. Basic Setting & Operation

Tip for Data Setting :

1. Press the A button to change the value of a flickering digit.

Press the B button to move to the next digit in a loop.

2. Press and hold the B buttonfor 1 second to move to the next setting

when the current setting is finished.

3. If the computer is idle during Data Setting Mode for 20

seconds, it'll automatically return to General Mode.

Tabla de contenidos

Otros manuales de Accesorios para bicicletas de Halfords

Halfords

Halfords 151624 Manual de usuario

Halfords

Halfords Bike Rack Manual de usuario

Halfords

Halfords Bicycle Accessories Manual de usuario

Halfords

Halfords Deluxe Roof Mount Carrier Manual de usuario

Halfords

Halfords Low 2 Bike Carrier Manual de usuario

Halfords

Halfords 151640 Manual de usuario

Halfords

Halfords Low 2 Manual de usuario

Halfords

Halfords Bike Trailer Manual de usuario

Manuales populares de Accesorios para bicicletas de otras marcas

Sigma

Sigma BC 16.16 Manual de usuario

Playcore

Playcore Dero Setbacks Manual de usuario

VDO Cyclecomputing

VDO Cyclecomputing x3dw Manual de usuario

Cateye

Cateye RAPID X2 Manual de usuario

buratti meccanica

buratti meccanica Clorofilla Trail Manual de usuario

Shimano

Shimano SG-8R20 Instrucciones de funcionamiento

BOB

BOB YAK Manual de usuario

APLIC

APLIC 303303/20190717TW012 Manual de usuario

SRAM

SRAM AXS BlipBox Manual de usuario

Garmin

Garmin EDGE 500 Manual de usuario

Shimano

Shimano FD-RX810 Manual de usuario

Cateye

Cateye V2C - Manual de instrucciones

KMART

KMART 43115907 Manual de usuario

SIGMA SPORT

SIGMA SPORT Buster 2000 Manual de usuario

NVO Components

NVO Components STEM Manual de usuario

DAXYS

DAXYS BP188 Manual de usuario

XLC

XLC BV-W17 Manual de usuario

Deda Elementi

Deda Elementi SUPERBOX Manual de usuario