H3C WA2620i-AGN Manual de usuario
H3C WA2620i-AGN Access Point
Installation Guide
Hangzhou H3C Technologies Co., Ltd.
http://www.h3c.com
Document version: 6PW102-20130712
Copyright © 2011-2013, Hangzhou H3C Technologies Co., Ltd. and its
licensors
All rights reserved
No part of this manual may be reproduced or transmitted in any form or by
any means without prior written consent of Hangzhou H3C Technologies Co.,
Ltd.
Trademarks
H3C, , H3CS, H3CIE, H3CNE, Aolynk, , H3Care, ,
IRF, NetPilot, Netflow, SecEngine, SecPath, SecCenter, SecBlade, Comware,
ITCMM and HUASAN are trademarks of Hangzhou H3C Technologies Co.,
Ltd.
All other trademarks that may be mentioned in this manual are the property of
their respective owners
Notice
The information in this document is subject to change without notice. Every
effort has been made in the preparation of this document to ensure accuracy
of the contents, but all statements, information, and recommendations in this
document do not constitute the warranty of any kind, express or implied.
Environmental protection
This product has been designed to comply with the environmental protection
requirements. The storage, use, and disposal of this product must meet the
applicable national laws and regulations.
Preface
The H3C WA2620i-AGN AP Installation Guide describes the hardware
specifications, preparations before installation, installation procedure,
cabling and grounding, and login procedure of the WA2620i-AGN AP.
This preface includes:
•Audience
•Conventions
•Obtaining documentation
•Technical support
•Documentation feedback
Audience
This documentation is intended for:
•Network planners
•Field technical support and servicing engineers
•Network administrators working with the WA2620i-AGN APs
Conventions
This section describes the conventions used in this documentation set.
GUI conventions
Convention Descri
p
tion
Boldface Window names, button names, field names, and menu items are in
Boldface. For example, the New User window appears; click OK.
> Multi-level menus are separated by angle brackets. For example,
File > Create > Folder.
Symbols
Convention Descri
p
tion
WARNING An alert that calls attention to important information that if not
understood or followed can result in personal injury.
CAUTION
An alert that calls attention to important information that if not
understood or followed can result in data loss, data
corruption, or damage to hardware or software.
NOTE An alert that contains additional or supplementary
information.
Obtaining documentation
You can access the most up-to-date H3C product documentation on the World
Wide Web at http://www.h3c.com.
Click the links on the top navigation bar to obtain different categories of
product documentation:
[Technical Support & Documents > Technical Documents] – Provides
hardware installation, software upgrading, and software feature
configuration and maintenance documentation.
[Products & Solutions] – Provides information about products and technologies,
as well as solutions.
[Technical Support & Documents > Software Download] – Provides the
documentation released with the software version.
Technical support
servi[email protected]
http://www.h3c.com
Documentation feedback
You can e-mail your comments about product documentation to
We appreciate your comments.
i
Contents
Product overview ······························································································1
Preparing for installation··················································································3
Safety recommendations ················································································· 3
Accessories provided with the AP·································································· 3
User-supplied installation tools and equipment············································· 4
Installing the AP ································································································6
Check before installation················································································· 7
Determining the installation position······························································ 7
Installing the AP································································································ 8
Mounting the AP on a table ··································································· 8
Mounting the AP on a wall ···································································· 9
Mounting the AP on a ceiling ······························································12
Connecting the power supply·······································································14
Check before power-on ········································································14
Local power supply ···············································································15
PoE power supply··················································································16
Check after power-on ···········································································16
Connecting the AP to the network································································16
Checking the network connection for the fit AP·································17
Checking the network connection for the fat AP································17
Logging in to the fat AP················································································· 18
Logging in through the console port ····························································18
Setting up the configuration environment ···········································19
Setting terminal parameters ·································································19
Logging in through the console port····················································23
Logging in through Telnet or web ································································23
Appendix LEDs and ports·············································································· 25
LEDs ·················································································································25
Ports·················································································································26
Index··············································································································· 29
1
Product overview
The H3C WA2620i-AGN Access Point has integrated antennas, and also
supports external antennas. The WA2620i-AGN can serve as a fit AP to
cooperate with wireless switches or access controllers to provide wireless
access for WLAN users. All configuration tasks are configured on the wireless
switches or access controllers. The WA2620i-AGN can also operate as a fat
AP to provide wireless access for WLAN users.
Figure 1 Deployment of the AP on hotspots (fit AP)
Core equipment room
RADIUS
server
Wireless
NMS
Switch
Switch
Switch
Switch
Switch
Auditorium
Restaurant or
tea house
Hall or
information desk
Parking lot
PC
PC
PC
PC
AC
WA2620i-AGN
WA2620i-AGN
WA2620i-AGN
WA2620i-AGN
2
Figure 2 Deployment of the AP on hotspots (fat AP)
Table 1 Basic configuration
Dimensions
(H × W × D) Weight Max.
p
ower
Enclosure Protocol
Power
su
pp
l
y
188.6 ×
188.6 × 51
mm (7.43 ×
7.43 × 2.01
in)
640.5 g
(22.59
oz)
12.95 W
Cast
aluminum +
plastic
802.11a
/b/g/n
Local power
supply +
802.3af
Core equipment room
RADIUS
server
Wireless
NMS
Switch
Switch
Switch
Switch
Switch
Auditorium
Restaurant or
tea house
Hall or
information desk
Parking lot
PC
PC
PC
PC
WA2620i-AGN
WA2620i-AGN
WA2620i-AGN
WA2620i-AGN
3
Preparing for installation
Safety recommendations
W
ARNING!
Only qualified personnel can install and remove a WA2620i-AGN and
its accessories. You must read all safety instructions supplied with the
access points before installation and operation.
To avoid possible bodily injury and equipment damage, read the following
safety recommendations before you install a WA2620i-AGN. Note that the
recommendations do not cover every possible hazardous condition.
•Take adequate safety measures to avoid bodily injury and access point
damage.
•Make sure that the ground is dry and flat and anti-slip measures are in
place.
•Keep the chassis clean and dust-free.
•Do not place the access point in a moist area and avoid liquid
surrounding the access point.
•Keep the chassis and installation tools away from walkways.
Accessories provided with the AP
The following accessories are provided with the AP:
Wall-mounting bracket MAC address label
4
Console cable (provided with the fat AP
only) Wall anchor kit
Hex-head bolt, washer, and nut Rubber feet
NOTE:
A
ntennas, power adapter, and power cable are user-supplied.
User-supplied installation tools and
equipment
When you install a WA2620i-AGN access point, you may need the following
tools:
Level Marker Knife
Wire stripper RJ-45 crimping tool Percussion drill with
matching drills
Tabla de contenidos
Otros manuales de Punto de acceso inalámbrico de H3C
H3C
H3C WA530 Manual de instrucciones
H3C
H3C WA Series Manual de usuario
H3C
H3C UAP380 Manual de usuario
H3C
H3C WA2110-AG Manual del operador
H3C
H3C WA6638 Manual de usuario
H3C
H3C WA6628E-T Manual de usuario
H3C
H3C AR 18-3XE/18-21X Series Manual de usuario
H3C
H3C WA2600 Series Manual de instalación
H3C
H3C WA4320H-ACN Guía del usuario
H3C
H3C WA6120 Manual de usuario
H3C
H3C WA2200 Series Manual de usuario
H3C
H3C WA4320-ACN-PI Manual de usuario
H3C
H3C WA6520 Manual de usuario
H3C
H3C WA2620X-AGNP Manual de usuario
H3C
H3C WA2620-AGN Manual de usuario
H3C
H3C WA5330 Manual de usuario
H3C
H3C WA6500 Series Guía del usuario
H3C
H3C WA560 Manual de usuario
H3C
H3C WA2110-AG Manual de usuario
H3C
H3C WA4320-ACN Manual de usuario
