H3C S5830 Series Manual de usuario

H3C S5830 Switch Series

Installation Guide

New H3C Technologies Co., Ltd.

http://www.h3c.com.hk

Document version: 6W103-20170526

No part of this manual may be reproduced or transmitted in any form or by any means without prior

written consent of New H3C Technologies Co., Ltd.

Trademarks

H3C, , H3CS, H3CIE, H3CNE, Aolynk, , H3Care,

, IRF, NetPilot, Netflow,

SecEngine, SecPath, SecCenter, SecBlade, Comware, ITCMM and HUASAN are trademarks of New

H3C Technologies Co., Ltd.

All other trademarks that may be mentioned in this manual are the property of their respective owners

Notice

The information in this document is subject to change without notice. Every effort has been made in the

preparation of this document to ensure accuracy of the contents, but all statements, information, and

recommendations in this document do not constitute the warranty of any kind, express or implied.

Environmental protection

This product has been designed to comply with the environmental protection requirements. The storage,

use, and disposal of this product must meet the applicable national laws and regulations.

Preface

The H3C S5830 Switch Series Installation Guide guides you through the installation of your switch. It

covers product overview, preparing for installation, installing the switch, powering on the switch for the

first time, setting up an IRF fabric, and troubleshooting.

This preface includes:

•Audience

•Conventions

•Obtaining documentation

•Technical support

•Documentation feedback

Audience

This documentation is intended for:

•Network planners

•Field technical support and servicing engineers

•Network administrators working with the S5830 switch series

Conventions

The following information describes the conventions used in the documentation.

Command conventions

Convention Descri

tion

Boldface Bold text represents commands and keywords that you enter literally as shown.

Italic Italic text represents arguments that you replace with actual values.

[ ] Square brackets enclose syntax choices (keywords or arguments) that are optional.

{ x | y | ... }

Braces enclose a set of required syntax choices separated by vertical bars, from which

you select one.

[ x | y | ... ]

Square brackets enclose a set of optional syntax choices separated by vertical bars, from

which you select one or none.

{ x | y | ... } *

Asterisk marked braces enclose a set of required syntax choices separated by vertical

bars, from which you select a minimum of one.

[ x | y | ... ] *

Asterisk marked square brackets enclose optional syntax choices separated by vertical

bars, from which you select one choice, multiple choices, or none.

&<1-n> The argument or keyword and argument combination before the ampersand (&) sign can

be entered 1 to n times.

# A line that starts with a pound (#) sign is comments.

GUI conventions

Convention Descri

tion

Boldface Window names, button names, field names, and menu items are in Boldface. For

example, the New User window opens; click OK.

> Multi-level menus are separated by angle brackets. For example, File > Create > Folder.

Symbols

Convention Descri

tion

WARNING An alert that calls attention to important information that if not understood or followed can

result in personal injury.

CAUTION An alert that calls attention to important information that if not understood or followed can

result in data loss, data corruption, or damage to hardware or software.

IMPORTANT An alert that calls attention to essential information.

NOTE An alert that contains additional or supplementary information.

TIP An alert that provides helpful information.

Network topology icons

Represents a generic network device, such as a router, switch, or firewall.

Represents a routing-capable device, such as a router or Layer 3 switch.

Represents a generic switch, such as a Layer 2 or Layer 3 switch, or a router that supports

Layer 2 forwarding and other Layer 2 features.

Represents an access controller, a unified wired-WLAN module, or the access controller

engine on a unified wired-WLAN switch.

Represents an access point.

Wireless terminator unit.

Wireless terminator.



Represents a mesh access point.



Represents omnidirectional signals.



Represents directional signals.



Represents a security product, such as a firewall, UTM, multiservice security gateway, or

load balancing device.

Represents a security module, such as a firewall, load balancing, NetStream, SSL VPN,

IPS, or ACG module.

Examples provided in this document

Examples in this document might use devices that differ from your device in hardware model,

configuration, or software version. It is normal that the port numbers, sample output, screenshots, and

other information in the examples differ from what you have on your device.

Obtaining documentation

To access the most up-to-date H3C product documentation, go to the H3C website

at http://www.h3c.com.hk.

To obtain information about installation, configuration, and maintenance, click

http://www.h3c.com.hk/Technical_Documents

To obtain software version information such as release notes, click

http://www.h3c.com.hk/Software_Download

Technical support

service@h3c.com

http://www.h3c.com.hk

Documentation feedback

You can email your comments about product documentation to inf[email protected].

We appreciate your comments.

Contents

Product overview·························································································································································· 1

S5830-52SC panel views················································································································································1

S5830-106S panel views ················································································································································2

Preparing for installation ············································································································································· 4

Safety recommendations ··················································································································································4

Examining the installation site ·········································································································································4

Temperature/humidity ·············································································································································4

Cleanness··································································································································································5

EMI·············································································································································································5

Laser safety································································································································································5

Installation tools·································································································································································6

Installing the switch······················································································································································ 7

Installing the switch in a 19-inch rack·····························································································································8

Mounting bracket and cable management bracket kits·······················································································8

Rack mounting rail kit ··············································································································································9

Installation methods··············································································································································· 10

Installing the mounting brackets, chassis rails, and grounding cable (for the S5830-52SC)······················· 11

Installing the mounting brackets, chassis rails, and grounding cable (for the S5830-106S) ······················· 13

Rack-mounting the S5830-52SC switch·············································································································· 15

Rack-mounting the S5830-106S switch ·············································································································· 17

Grounding the switch ···················································································································································· 20

Grounding the switch with a grounding strip····································································································· 20

Grounding the switch through the PE wire of an AC power cord ··································································· 21

Installing/removing a fan tray······································································································································ 21

Selecting a fan tray ··············································································································································· 21

Installing a fan tray ··············································································································································· 22

Removing a fan tray·············································································································································· 23

Installing/removing a power module··························································································································· 23

Installing/removing a power module·················································································································· 23

Connecting the power cord ·········································································································································· 26

Connecting the AC power cord··························································································································· 26

Connecting the DC power cord··························································································································· 27

Installing/removing an interface card ························································································································· 27

Installing an interface card··································································································································· 27

Removing an interface card ································································································································· 28

Verifying the installation················································································································································ 28

Powering on the switch for the first time···················································································································29

Setting up the configuration environment···················································································································· 29

Connecting the console cable ······································································································································ 29

Console cable························································································································································ 29

Connection procedure ·········································································································································· 30

Setting terminal parameters ·········································································································································· 30

Powering on the switch·················································································································································· 33

Setting up an IRF fabric ·············································································································································34

IRF fabric setup flowchart·············································································································································· 34

Planning IRF fabric setup··············································································································································· 35

Planning IRF fabric size and the installation site································································································ 35

Identifying the master switch and planning IRF member IDs ············································································ 35

Planning IRF topology and connections ·············································································································· 36

Identifying physical IRF ports on the member switches ····················································································· 37

Planning the cabling scheme ······························································································································· 37

Configuring basic IRF settings······································································································································· 39

Connecting the physical IRF ports ································································································································ 40

Accessing the IRF fabric to verify the configuration ··································································································· 40

Maintenance and troubleshooting····························································································································41

Power module failure····················································································································································· 41

Fan failure······································································································································································· 41

Configuration terminal problems·································································································································· 41

Appendix A Technical specifications························································································································43

Technical specifications················································································································································· 43

Cooling system ······························································································································································· 44

Cooling system of the S5830-52SC···················································································································· 44

Cooling system of the S5830-106S ···················································································································· 45

Appendix B FRUs and compatibility matrixes··········································································································47

Hardware compatibility matrix····································································································································· 47

Hot swappable power modules···································································································································· 47

Hot swappable fan trays··············································································································································· 48

Interface cards································································································································································ 49

Appendix C Ports and LEDs ······································································································································50

Ports ················································································································································································· 50

Console port··························································································································································· 50

Management Ethernet port··································································································································· 50

10/100/1000Base-T Ethernet port ···················································································································· 50

SFP port ·································································································································································· 51

SFP+ port································································································································································ 53

LEDs ················································································································································································· 56

System status LED··················································································································································· 56

10/100/1000Base-T Ethernet port LED············································································································· 56

SFP port LED··························································································································································· 56

SFP+ port LED ························································································································································ 57

Management Ethernet port LEDs·························································································································· 57

Interface card status LED······································································································································· 57

Index ···········································································································································································58

Product overview

The H3C S5830 Switch Series includes the following models:

•S5830-52SC

•S5830-106S

This chapter describes the chassis panel views of the S5830 switches.

S5830-52SC panel views

Figure 1 S5830-52SC front panel

(1) 10/100/1000Base-T auto-sensin

Ethernet port

(2) 10/100/1000Base-T Ethernet port LED

(3) ACT LED for the management Ethernet port (4) LINK LED for the management Ethernet port

(5) Console port (6) Interface card status LED (Slot)

(7) System status LED (SYS) (8) SFP+ port

(9) SFP+ port LED (10) 1000Base-X SFP port

(11) SFP port LED

(12) Mana

ement Ethernet port

Figure 2 S5830-52SC rear panel

100-240Vac 100-240Vac

(1) System status LED (SYS) (2) Expansion interface card slot

(3) Fan tray slot (4) Power module slot 1 (PWR1)

(5) Power module slot 2 (PWR2)

NOTE:

The S5830-52SC switch comes with one expansion interface card slot, one fan tray slot, and two power

modules slots with filler panels. In this figure, two LSVM1AC650 AC power modules, one

LSWM152SCFAN fan tray, and one LSPM2SP2P expansion interface card are installed.

Figure 3 S5830-52SC left side panel

(1) Primary grounding point (2) Auxiliary grounding point

S5830-106S panel views

Figure 4 S5830-106S front panel

(1) Management Ethernet port (2) Console port

(3) 10/100/1000Base-T auto-sensin

Ethernet port

(4) 10/100/1000Base-T -Ethernet port LED

(5) SFP+ port (6) SFP+ port LED

(7) LINK LED for the management Ethernet port (8) ACT LED for the management Ethernet port

(9) System status LED (SYS)

Figure 5 S5830-106S rear panel

(1) Power module slot 1 (PWR1) (2) Power module slot 2 (PWR2)

(3) Fan tray slot (4) System status LED (SYS)

NOTE:

The S5830-106S switch comes with one fan tray slot and two power modules slots with filler panels. In this

figure, two LSVM1AC650 AC power modules and one LSVM1106SFAN fan tray are installed.

Figure 6 S5830-106S left side panel

(1) Primary grounding point (2) Auxiliary grounding point

Otros manuales para S5830 Series

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Cambiar de H3C

H3C

H3C S9500 Series Manual de usuario

H3C

H3C S5170-EI Series Manual de usuario

H3C

H3C s5820x series Manual de usuario

H3C

H3C S9500 Series Manual de usuario

H3C

H3C S3100-52P Instrucciones de instalación

H3C

H3C S9500 Series Manual de usuario

H3C

H3C S9500 Series Manual de usuario

H3C

H3C S5820X-28S Manual de usuario

H3C

H3C S9500 Series Manual de usuario

H3C

H3C S9500 Series Manual de usuario

H3C

H3C S9500E Series Manual de usuario

H3C

H3C S7500 Series Manual de usuario

H3C

H3C WX3000 Series Manual de instrucciones

H3C

H3C S12500X-AF Series Manual de usuario

H3C

H3C S7500 Series Instrucciones de instalación

H3C

H3C S5850-54QS Manual de usuario

H3C

H3C S9500 Series Manual de usuario

H3C

H3C S7500-LSQM1SRPB0-SALIENCE VI FRU PRE REL Manual de usuario

H3C

H3C S5150-EI Series Manual de usuario

H3C

H3C H3C S3600 Series Manual de usuario

H3C

H3C S3600V2-52TP-SI Manual de instalación

H3C

H3C S5560X-EI Series Manual de usuario

H3C

H3C S12500 Series Manual de usuario

H3C

H3C LS-S5600-26C-OVS Manual de usuario

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario