Grundig Sonoclock 420 Manual de usuario

ELECTRONIC CLOCK RADIO

SONOCLOCK 420

3 Sicherheit/Informationen 8 Radio-Betrieb

4 Auf einen Blick 8 Weck-Betrieb

6 Stromversorgung 10 Timer-Betrieb

7Installation 84 Service

11 Safety/Information 17 Radio mode

12 Overview 17 Alarm mode

14 Current supply 19 Timer mode

16 Installation 84 Service

20 Sécurité/Informations 25 Fonction radio

21 Vue d’ensemble 25 Fonction réveil

23 Alimentation en courant 27 Fonction horloge

24 Installation 84 Service après-vente

28 Sicurezza/Informazioni 33 Funzionamento radio

29 In breve 33 Funzionamento sveglia

31 Alimentazione elettrica 35 Funzionamento Timer

32 Installazione 84 Servizio

36 Segurança/Informações 41 Função rádio

37 Vista geral 41 Função despertar

39 Alimentação de corrente 43 Função timer

40 Instalação 84 Assistência a clientes

44 Seguridad/Información 49 Modo radio

45 Vista general 49 Modo despertador

47 Alimentación de corriente 51 Modo timer

48 Instalación 84 Servicio

52 Veiligheid/informatie 57 Radiofunctie

53 In een oogopslag 57 Alarmfunctie

55 Stroomtoevoer 59 Timer-mode

56 Installeren 84 Service

60 Sikkerhed/informationer 65 Radiofunktion

61 Kort oversigt 65 Vækkefunktion

63 Strømforsyning 67 Timerfunktion

64 Installation 84 Service

68 Säkerhet/Information 73 Radioanvändning

69 En överblick 73 Väckningsfunktionen

71 Strömförsörjning 75 Timerfunktioner

72 Installation 84 Service

76 Turvatoimet/tietoja 81 Radiokäyttö

77 Yleiskatsaus 81 Herätystoiminto

79 Käyttövirta 83 Ajastintoiminto

80 Ohjelmointi 84 Service

___________________________________________________________________

DEUTSCH

ENGLISH

FRANÇAIS

ITALIANO

PORTUGUÊS

ESPAÑOL

NEDERLANDS

DANSK

SVENSKA

SUOMI

ENGLISH

Safety

To ensure that this device provides you with long-term satisfaction and ent-

ertainment, please observe the following instructions:

This device is designed for the playback of audio signals.

Any other use is expressly prohibited.

Protect the device from moisture.

Please note when setting up the device, that furniture surfaces are covered

by various types of lacquer and plastic, most of which contain chemical

additives. These additives can, among other things, corrode the material of

the device supports, resulting in residues on the furniture surfaces which are

difficult or impossible to remove.

Do not use any cleaning agent, as this may damage the casing. Clean the

device with a clean, moist leather cloth.

Do not open the device. The manufacturer accepts no liability for damage

resulting from improper handling.

The identification plate is located at the bottom of the device.

Information

This device is noise-suppressed according to the applicable EC guidelines.

This product fulfils the European guidelines 89/336/EEC, 73/23/EEC and

93/68/EEC.

This device corresponds to the safety regulation VDE 0860 and thus the

international safety regulation IEC 65.

Technical data

Current supply: 230 Volt, 50/60 Hz

Output: DIN 45324, 10% THD 800 mW

Frequency range: FM 87.5 ...108.0 MHz

Dimensions and weight W x H x L 185 x 70 x 170 mm

Weight approx. 0.7 kg

Environment

The packing material for your device has been kept to a minimum.

It can be divided into two separate materials: Cardboard (box) and poly-

ethylene (bag).

Please observe the local regulations for disposing of the packing material.

Technical and optical modifications reserved!

SAFETY, INFORMATION_____________________

ENGLISH

1...5 and Channel positions, press once for channel position

6...10 1 ... 5, press twice for channel position 6 ... 10.

Display Displays various information, such as station frequen-

cy, time, day, alarm setting.

MEMORY Saves a radio station on a channel position.

ALARM 1 Select the desired alarm type:

ALARM 2 (e1or e2) = wake with signal tone, (¤1or ¤2)

= wake with radio station.

To set the alarm time, press and hold down

»ALARM 1« or »ALARM 2« and set the alarm

time with »+« or »–«.

WEC Blocks the alarm function during the weekend.

SLEEP Pressing once activates the sleep timer;

each repeated pressing reduces the operating time by

10 minutes (from 90 to 10 minutes).

SNOOZE Device activated: interrupts the alarm for approx.

5 minutes.

Interrupts the sleep timer.

Device switched off: to set the day of the week, hold

down »SNOOZE« and set the day with »+« or »–«.

OVERVIEW ___________________________________________

ON/OFF

TIME

TUNING

SONOCLOCK 420

SNOOZE

1...5

6...10

ALARM 1 ALARM 2

WEC SLEEP

SNOOZE

MEMORY

+ TUNING –

TIME

ON/OFF

VOLUME

ENGLISH

+ TUNING – For setting the radio station;

for setting the time, day of the week and alarm time.

ON/OFF Switching on/off;

terminates alarm for the day;

terminates the reminder timer.

TIME To set the time, hold down »TIME« and set the time

with »+« or »–«.

VOLUME For setting the volume.

UUHeadphone jack, for connecting a headphone set with

a jack plug (ø 3.5 mm).

The device loudspeaker is switched off.

Back of the device

ÜÜMains cable.

Line antennae.

Bottom of the device

RESET Returns the device to its original setting.

Battery compartment for back-up batteries.

OVERVIEW____________________________________________

Connecting the mains cable

Note:

Check if the mains voltage on the identification plate (at the bottom of

the device) corresponds to the local mains voltage.

If this is not the case, contact your dealer.

1Insert the mains cable in the socket (230 V~, 50/60 Hz).

Caution:

The only way to isolate the device from the mains supply is to pull the

plug.

Insert back-up batteries

If there is a power failure, the clock time and alarm time, as well as the

channel memory of the device are saved by the back-up batteries.

Radio mode and alarm mode cannot be used, the display is not illuminated,

however the clock time is displayed.

1Open the battery compartment by pressing the marked surface and

pushing back the cover.

2Insert two batteries (micro type, for example, UM4, R 03, 2x1.5V),

observing the polarity marked at the bottom of the battery compart-

ment.

Note:

We recommend that you replace the back-up batteries after approxi-

mately 1 year.

Remove the batteries when they are flat, or when the device is dis-

connected from the mains for an extended period.

There is no liability for damage resulting from flat batteries.

Environmental note:

Batteries, including those which are heavy metal-free, may not be dis-

posed of along with household waste. Please ensure the environmental-

ly sound disposal of used batteries, e.g. via public recycling sites. Find

out about the legal regulations which apply in your area.

Reset

If the electronic system of your device becomes blocked (as the result of sta-

tic electricity from the floor carpet or storms, for example), the device can be

reset to its original condition.

1Press »RESET« (at the bottom of the casing) with a sharp object.

– Time, day, alarm time and radio settings are deleted.

CURRENT SUPPLY________________________________

RESET

ENGLISH

Important notes for users in the U.K.

Mains plug

This apparatus is fitted with an approved moulded 13 Amp plug. To change

a fuse in this type of plug proceed as follows:

1Remove fuse cover and fuse.

2Fix new fuse which should be a BS1362 5 Amp, A.S.T.A. or BSI appro-

ved type.

3Refit the fuse cover.

If the fitted plug is not suitable for your socket outlets, it should be cut off

and an appropriate plug fitted in its place.

If the mains plug contains a fuse, this should have a value of 5 Amp. If a

plug without a fuse is used, the fuse at the distribution board should not be

greater than 5 Amp.

Note:

The severed plug must be disposed to avoid a possible shock hazard

should it be inserted into a 13 Amp socket elsewhere.

How to connect plug

The wires in the mains lead are coloured with the following code: blue =

neutral (N), brown = live (L).

As these colours may not correspond with the colour markings identifying

the terminals in your plug, proceed as follows:

1Connect the blue wire to the terminal marked N or coloured black.

2Connect the brown wire to the terminal marked L or coloured red.

3Do not connect either wire to the earth terminal in the plug, marked E

(or e) or coloured green (or green and yellow).

Before replacing the plug cover, make certain that the cord grip is clamped

over the sheath oft the lead – not simply over the two wires.

CURRENT SUPPLY____________________________________

Setting the time

1After the device has been connected to the mains, you must set the time

and the day.

– Display: »88« and » «, the time »0:00« flashes.

2Press and hold down »TIME«.

3Set the time with »+« or »–« (TUNING).

– When »+« or »–« (TUNING) are held down, the time can be set

more quickly.

Setting the day

1Press »SNOOZE« and hold down.

2Set the day with »+« or »–« (TUNING).

Setting radio stations

There are 10 channel positions available for radio stations.

1Switch on Sonoclock with the »ON/OFF« button.

– Display: »•«.

2Begin station search by pressing and holding down »+« or »–«

(TUNING).

– The search stops as soon as a radio station with a sufficiently strong

signal is found.

– You can also set the frequency step-by-step (50 kHz) by briefly press-

ing »+« or »–« (TUNING).

3Save radio station by pressing »MEMORY« (»M« flashes in the dis-

play), select the desired channel position within 8 seconds with

»1 ... 10« and confirm with »MEMORY«.

– Press buttons »1 ... 10« once for channel positions 1 ... 5, and twice

for channel positions 6 ... 10.

– Display: the frequency of the selected channel position. In the dis-

play, »M« is illuminated.

4To set further radio stations, repeat procedure from pt. 2.

Note:

If no channel position is selected within 8 seconds, the device interrupts

the setting procedure. Start again at pt. 3.

SUN

INSTALLATION _____________________________________

SUNWEC

●88000: .

MONSUNWEC

●88930: .

SUNWEC

●88930: .

MONSUNWEC

●8FM MHz

8875:.

MONSUNWEC

●8FM MHz

8882:.

MONSUNWEC

●8FM

MHz

8882:.

ENGLISH

RADIO MODE_______________________________________

Note:

Each time a button is pressed, the display of your device is illuminated

for 8 seconds.

Radio reception

When the device is switched off, the display shows the current time and

day.

1Switch on the device with the »ON/OFF« button.

– Display: »FM«, »•«, the station frequency and the day of the week,

quickly followed by the current time.

– The previous channel position is automatically selected.

2Select channel position with the »1 ... 10« buttons.

– Press »1 ... 10« once for channel positions 1 ... 5, and twice for

channel positions 6 ... 10.

3Switch off the device with »ON/OFF«.

– Display: »88«, quickly followed by the current time and the day.

Note:

To display channel position and frequency, briefly press »+« or »–«

(TUNING).

Adjusting the volume

Adjust the volume

with »VOLUME «.

ALARM MODE______________________________________

Setting alarm time and type

You can enter two different alarm times and select between two different

alarm types.

Setting the alarm time

1Enter the first alarm time by pressing and holding down the

»ALARM 1« button.

– Display: the set alarm time.

2Set the desired alarm time with »+« or »–« (TUNING).

3Release »ALARM 1«.

Note:

Repeat procedure for the second alarm time, using »ALARM 2«.

WEDT UEMO NSUNWEC

●8FM

MHz

8979:.

WEDT UEMO NSUNWEC

●812 25: .

WEDT UEMO NSUNWEC

●8FM

MHz

8922:.

WEDT UEMO NSUNWEC

●8

¤18000: .

WEDT UEMO NSUNWEC

●8

¤18600: .

Alarm with radio station

1Switch on the device with »ON/OFF«.

2Select channel position with the »1 ... 10« buttons, adjust volume with

»VOLUME«.

3Switch off the device with »ON/OFF«.

4Activate first alarm time by pressing »ALARM 1« until »¤1«

appears in the display.

– The device switches to alarm time 1 and switches off again after

90 minutes.

– While the alarm sounds, »¤1« flashes in the display.

Note:

Repeat procedure for the second alarm time, using »ALARM 2«.

Alarm with signal tone

Your device is equipped with a dynamic signal tone; this means the volume

of the signal tone becomes increasingly louder as it sounds.

1Switch off the device with »ON/OFF«.

2Activate first alarm time by pressing »ALARM 1« until »e1«

appears in the display.

– The device switches to alarm time 1; the signal tone becomes increa-

singly loud. The signal tone is switched off after a maximum of

90 minutes.

– While the alarm sounds, »e1« flashes in the display.

Note:

Repeat procedure for the second alarm time, using »ALARM 2«.

The signal tones for alarm time 1 and alarm time 2 are different.

Check the alarm time

You can check both alarm times.

1Switch off the device with »ON/OFF«.

2Press »ALARM 1« once.

– Display: alarm type, alarm time 1.

3Press »ALARM 2« again.

– Display: alarm type, alarm time 2.

ALARM MODE________________________________________

WEDT UEMO NSUNWEC

●8

¤18600: .

WEDT UEMO NSUNWEC

ee1

●88600: .

Otros manuales para Sonoclock 420

Tabla de contenidos

Otros manuales de Radio reloj de Grundig

Grundig

Grundig Sonoclock SC 3300 Manual de usuario

Grundig

Grundig Sonoclock 720 Manual de usuario

Grundig

Grundig SONOCLOCK 890 Manual de usuario

Grundig

Grundig Sonoclock 590 Manual de usuario

Grundig

Grundig SONOCLOCK 610 Manual de usuario

Grundig

Grundig SONOCLOCK 620 Manual de usuario

Grundig

Grundig Sonoclock 3000 Manual de usuario

Grundig

Grundig SONOCLOCK SC 910 Manual de usuario

Grundig

Grundig Sonoclock 11 Manual de usuario

Grundig

Grundig Sonoclock SC 5300 Manual de usuario

Grundig

Grundig SONOCLOCK 620 Manual de usuario

Grundig

Grundig SCC 240 Manual de usuario

Grundig

Grundig SCC 240 Manual de usuario

Grundig

Grundig Sonoclock 490 Manual de usuario

Grundig

Grundig Sonoclock 760 DCF Manual de usuario

Grundig

Grundig SONOCLOCK 220 Manual de usuario

Grundig

Grundig Sonoclock 60 SC 6300 Manual de usuario

Grundig

Grundig YB-P 2000 Manual de usuario

Grundig

Grundig Sonoclock 910 Instrucciones de construcción

Grundig

Grundig Sonoclock 660 DAB Manual de usuario

Grundig

Grundig Sono Clock 420 Manual técnico

Grundig

Grundig Sonoclock 54 SC 5304 DCF Manual de usuario

Grundig

Grundig Sonoclock 390 Manual de usuario

Grundig

Grundig Sonoclock 660 PLL Manual de usuario

Manuales populares de Radio reloj de otras marcas

Denver

Denver CRQ-105 Manual de usuario

Audiovox

Audiovox CE90 Manual de usuario

Sony

Sony Dream Machine ICF-C763L Manual de usuario

Sanyo

Sanyo DMP-P6 Manual de usuario

RCA

RCA RPC100 Manual de usuario

Yamaha

Yamaha ISX-80 Manual de usuario

Pyle

Pyle PLMR20W Manual de usuario

Blaupunkt

Blaupunkt CR7BK Manual de usuario

Philips

Philips AJ3180 Manual de usuario

HoMedics

HoMedics SS-5500-2EU Manual de usuario

RCA

RCA RC66i Manual de usuario

Versaudio

Versaudio Vers Manual de usuario

SOUNDMASTER

SOUNDMASTER UR8100 Manual de usuario

Audiovox

Audiovox CE90 Manual de usuario

Jensen Audio

Jensen Audio JCR-222 - AM/FM Projection Alarm Clock Radio Manual de usuario

Roberts

Roberts ChronoDAB Manual de usuario

AEG

AEG MRC 4132 BT Manual de usuario

Tokai

Tokai TC-155 Manual de usuario