.
Spacer plates
Step 2
Set carrier mounting arm
to desired position & fit
12mm x 65 long bolts & nuts
Step 1
Position mount on top of post
Note spacer plates.
Fit 12mm x 85 long bolts & nuts
Step 4
Tighten this nut to achieve
resistance in tilting action
Step 3
Tighten all 12mm nuts
Step 1
Set carrier mount
to desired position
Step 2
Insert safety pin & R clip
Step 3
Tighten 12mm bolts
Spacer plates
Step 3
Fit 12mm x 75 long
bolts & nuts,
fully tighten
Step 2
Set carrier mounting arm
to desired position
page 3
Fit assembly to top of post.
Fit carrier mount to arm
Step 1
Position non tilting mount
on top of post
Note spacer plates
Tilting Carrier
Non Tilting Carrier
