Green Dot N8102T Manual de usuario
1. Be sure to read
this user’s manual
before starting your
operation.
2. Never open the
cover. It is very dan-
gerous to touch the
inside of the unit due
to possible electric
shock.
3. In lightning storm
weather, or when
this unit is not in use
for a long time,
pleasepull the power
cord from the outlet.
Never use a dam-
aged power cord.
Please connect to an
power socket with an
all-pole mains
switch in buildings.
4. Do not touch the
power with a wet
hand. If there is liq-
uid flowing into the
unit, pull out the
power cord immedi-
ately because it may
cause fire or electric
shock.
5. Place the unit in a
well ventilated and
no heat environment.
6.Install the unit
horizontally. Unbal-
anced installation may
cause the unit to be
damaged.
9. Do not put heavy ob-
jects on top of the unit
and power cord.
8. Install the unit in a
place with:
suitable temperature
no direct sunrays
low humidity
low vibration influence
7. When the unit is sud-
denly moved from a hot
area to a cold area, turn
it off for 1 to 2 hours.
IMPORTANT SAFETY INSTRUCTION
This symbol alerts user to the presence of uninsulated "danger-
ous voltage" in product enclosure that sufficient magnitude will
constitute risk to person.
This symbol reminds user of presence of important operation and
maintenance instructions in literature accompanying this receiver.
WARNING MARK:
This mark appears on the rear panel of the receiver, painted prominently in contrasting
color to the background.
Warning: To reduce the risk of electric shock, don't remove the cover (or back). Equipment
service and maintenance should be undertaken by qualified personnel.
1
Contents
I. General Information .....................................................................................................2
1. Preface ................................................................................................................... 2
2. Feature ................................................................................................................... 2
3. Front Panel ............................................................................................................. 3
4. Rear Panel ............................................................................................................. 4
5. Remote Control Unit .............................................................................................. 5
6. System Connection ............................................................................................... 6
II. Quick Installation ........................................................................................................7
III. Main Menu ..................................................................................................................8
1. Installation .............................................................................................................. 8
1.1 Auto Search .................................................................................................... 8
1.2 Manual Search ............................................................................................... 8
1.3 Upgrade Software .......................................................................................... 9
2. Manage Channel ................................................................................................... 9
2.1 Channel Favourite .......................................................................................... 9
2.2 Channel Information ...................................................................................... 9
3. User Setup ........................................................................................................... 10
3.1 System Lock .................................................................................................10
3.2 General Setting ............................................................................................ 10
3.3 Factory Default ............................................................................................. 11
4. Information ........................................................................................................... 11
4.1 CA Information .............................................................................................. 11
4.2 Mail Information ............................................................................................ 11
4.3 System Information ...................................................................................... 11
5. Games ................................................................................................................. 11
6. Shortcut Key Function .......................................................................................... 12
6.1 EPG ..............................................................................................................12
6.2 Channel List .................................................................................................12
6.3 Channel Information .................................................................................... 12
6.4 Volume Control ............................................................................................. 13
6.5 Schedule Manage ........................................................................................ 13
6.6 Subtitle ......................................................................................................... 13
6.7 Audio Selection ............................................................................................. 13
IV. Technical Specification...........................................................................................14
V. Trouble Shooting ......................................................................................................15
2
I.GeneralInformation
1. Preface
Thank you for purchasing N8102T Digital Terrestrial Receiver. It is able to transform
digital signal into high quality video and audio signal for entertainment.
Please read this user’s manual carefully to safely install, use and maintain the receiver
at maximum performance. Please keep this user’s manual next to your receiver for
future reference.
Note: The information in this user's manual is subject to change without notice. The
photo and function explanations in the manual are for reference. If any discrepancy
exists, please refer to the entity.
2. Feature
Support MPEG-4 video and audio decoding
DVB-T tuner
Convenient NIT (Network Information Table) search
Video output: 4:3 / 6:9
OTA (Over the Air) upgrade supported
Support stereo analog audio output and digital audio output
English OSD (On Screen Display)
3
3. Front Panel
○○○○○○○
○○○○○○○
○○○○○○
○○○○○○
○○○○○○○○
○○○○
○○○○○○○○○
○○○○○○
○○○○○○○
○○○○○○
Name Function
1/3. Adjust volume or move cursor left/right
2/8. Switch channel or move cursor up/down
4. Switch between operation and standby modes
5. IR Remote receiver
6. LED DISPLAY Display status
7. MENU Display/exit from main menu
9. OK Display channel list or confirm operation
10. SMART CARD SLOT Open the cover to insert smart card
4
4. Rear Panel
○○○○○○
○○○○○
○○○○○
○○○○○
○○○
○○○○○
○○○○○○
Name Function
1. ANT IN Connect to a terrestrial antenna
2. LOOP OUT Loop output RF signal to another receiver
3. VIDEO Output video signal to TV
4. D-AUDIO Output digital audio signal to amplifier
5/6. R/L-AUDIO Output right/left audio signal to TV or amplifier
7. 100-240V ~ Power supply
8. ON/OFF Power switch
○○○○○○
5
5. Remote Control Unit
Name Function
Mute/restore sound
Switch between operation and standby
modes
Switch between TV and radio modes
EPG Display EPG Guider
FAV Display channel favourite window
LANG Display subtitle window
MENU Display/exit from menu mode
EXIT Back to previous menu or exit from
operation
Switch channel or move cursor up/down
Adjust volume or move cursor left/right
OK Display channel list or confirm operation
Back to previous channel
INFO Display channel information bar
VOL+/- Adjust volume
REMIND Display schedule manage window
GAME Display games window
PAGE+/- Up/down pages
COLOR
KEYS
Functions depend on specific
applications
0-9 Number keys
AUDIO Display audio selection window
MAIL Reserved
Note: The keys mentioned in the main menu refer to that on RCU (Remote Control
Unit), except for special explanations.
6
6. System Connection
The following figure shows connections required for TV and other related electric devices.
If you encounter any problem, please contact your local dealer.
1. Connect ANT IN port to a terrestrial antenna with an RF cable.
2. Connect LOOP OUT port to ANT IN port on another receiver with an RF cable.
3. Connect VIDEO and R/L-AUDIO ports on receiver to corresponding ports on TV with
an RCA cable.
4. Connect D-AUDIO port on receiver to a corresponding port on amplifier with an D-
AUDIO cable.
7
II.QuickInstallation
Step 1: Check the system connection.
Check and make sure your related devices are correctly connected as instructed in 6.
System Connection.
Step 2: Insert the smart card released by your local dealer.
1. Open the right hand cover on front panel of the receiver.
2. Face the side with electronic chip downwards and insert the smart card into corre-
sponding slot horizontally according to arrow direction.
Note: Don't attempt to remove or insert the smart card while the receiver is on.
Step 3: Turn on your TV and switch it to AV mode.
Step 4: Power on the receiver.
Turn on the receiver, system initializes and start-up OSD is shown on TV screen.
Step 5: Search channels.
1. If there are some channels stored in the receiver, the channel number is shown on
LED DISPLAY.
2. If there is no channel stored in the receiver, system will search channels automatically.
For more details, please refer to 1. Installation.
Step 6: Play program
When watching TV, you can select channel with keys.
Tabla de contenidos
