GRAUPNER Mz-8 Manual de usuario

Otros manuales de Transmisor de GRAUPNER

GRAUPNER

GRAUPNER mz-32 HoTT Manual de usuario

GRAUPNER

GRAUPNER Kingpad mc-edition mc-28 Manual del propietario

GRAUPNER

GRAUPNER mz-24 PRO Manual de usuario

GRAUPNER

GRAUPNER S1031 Manual de usuario

GRAUPNER

GRAUPNER mc-19 tiFS Manual de usuario

GRAUPNER

GRAUPNER mc-32 HoTT Manual de usuario

GRAUPNER

GRAUPNER mz-12PRO HoTT Manual de usuario

GRAUPNER

GRAUPNER mc-32 HoTT Manual del propietario

GRAUPNER

GRAUPNER Kingpad mc-edition mc-28 Manual de usuario

GRAUPNER

GRAUPNER S1036.77 Manual de usuario

GRAUPNER

GRAUPNER Kingpad mc-edition mc-28 Manual de usuario

GRAUPNER

GRAUPNER mz-16 Manual de usuario

GRAUPNER

GRAUPNER MZ-10 HOTT Manual de usuario

GRAUPNER

GRAUPNER mz-10c Manual de usuario

GRAUPNER

GRAUPNER MZ-10 HOTT Manual de usuario

GRAUPNER

GRAUPNER S1047 Manual de usuario

GRAUPNER

GRAUPNER mz-32 HoTT Manual de usuario

GRAUPNER

GRAUPNER mz-32 HoTT Manual de usuario

GRAUPNER

GRAUPNER S8460 Manual de usuario

Manuales populares de Transmisor de otras marcas

NIVELCO

NIVELCO EasyTREK SCA-300 Series Manual del propietario

Honeywell

Honeywell 5816WMBR Manual de usuario

Kamstrup

Kamstrup READy MTU Instrucciones de funcionamiento

Omega

Omega ZW Series Manual de usuario

ABB

ABB Field 264H Guía

Alinco

Alinco DJ-V17T Manual de usuario

Dejero

Dejero EnGo 3x Manual de usuario

Rosemount

Rosemount 4600 Manual de usuario

Speaka Professional

Speaka Professional 2342740 Manual de usuario

trubomat

trubomat GAB 1000 Manual de usuario

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Manual de usuario

Rondish

Rondish UT-11 Manual de usuario

MG

MG 10JRE Manual de usuario

Burkert

Burkert 8177 Manual de usuario

Firetide

Firetide HotPort 3203 Manual

Tele Radio

Tele Radio T9-02 Manual de usuario

Rotronic

Rotronic HygroFlex HF3 Series Manual de usuario

Jamara

Jamara FCX6 Pro Tel Manual de usuario

P1

mz-8H HoTT

◎ GRAUPNER

8th F, 202 Dong, Chunui Techno-Park II, 202,Chunui-

Dong, onmi-Gu,

Bucheon-Si, Gyeonggi-do, SOUTH KOREA.

TEL: 070-7863-3675 FAX : 070-7863-3670

E-mail: service@openhobby.com

FUNCTION

Main function and Channel

Basic 4 Channels and added 6 Channels.

6 Channel is as below.

① LED : ON / OFF

-> CH8 1100us / 1900us

② SPEED : Attitude mode / Rate mode

-> CH 1100us / 1900us

③ SNAP : Taking pictures

-> CH9 1100us (1 00us nothing)

④ RECORD : Film movies

-> CH9 1900us

⑤ FLIP : Use the button on top left of image (360° FLIP)

-> CH10 1100us / 1900us

now channel 10, later channel 7, (Alpha 1 0 not active

in autopilot mode as soon as GPS is connected it will be

channel 6 coming home function)

⑥ 3D / EASY : Use the button on top right of image

(180° revolution and additional function)

-> CH6 1100us / 1900us

CH6, when AKRO3D is adjusted in the receiver, for

normal flight mode with GPS (Alpha 1 0) it will be

autopilot function

⑦ 2.4GHz Quad with 6-Axis Gyro

⑧ You can check real time flight screen with FPV

Camera and 5.8GHz RF. And you can monitor with

Goggle and other monitors.

⑨ You can attach camera and video module by

choosing option. You can take a video on the radio

using Photo & Video button.

mz-8

Frequency band 2404.0 6MHz ~2479.09 MHz

Modulation FHSS

Transmission output about 1mW

Temperature range -10 … + ℃

Antenna Monopole Antenna

Battery AA Size x 3 pcs

Operating voltage 3.6 … 4.8V

Output voltage about 0mA

Dimension 1 1 x 134 x 63.7 mm

Weight about 260g (Incl. battery)

P2

Transmitter manual

Operating transmitter

- Power on : Pull Slide switch up

- Power off : Pull Slide switch down

1) Flip Function

I

f you push Flip button, buzzer will ring with 0. seconds

intervals.

To rotate a full 360 degrees,

push Flip button and when

buzzer starts rin

ging, move stick of transmitter to

maximum position quickly.

2) 3D & Easy Function

W

hen you push 3D button, buzzer will ring twice with 1

second intervals.

3D function is for 180 degrees flight.

T

same function with Flip.

Flip Button

Speed Button

Light

Button

Trim

f you push Flip button, buzzer will ring with 0. seconds

push Flip button and when

ging, move stick of transmitter to

hen you push 3D button, buzzer will ring twice with 1

T

o operate, use

3) Attitude Function

W

hen you push Function button, one short sound rings.

This function is attitude

control of general quad copters.

4) Rate Function

W

hen you push Function button, two short sound rings.

Y

ou can do rotation and normal flight on 3D flight mode

with

transmitter. Function is same with 3D helicopter.

Power Switch

MZ

-

8

hen you push Function button, one short sound rings.

control of general quad copters.

hen you push Function button, two short sound rings.

ou can do rotation and normal flight on 3D flight mode

transmitter. Function is same with 3D helicopter.

3D / Easy Button

Status & Function

Camera ecord Button

Camera Snep

Trim

P3

LED Function

< LED arrangement of transmitter >

1) LIGHT ON / OFF Function

Yellow Led

① When the lights are off, LED

stay OFF

②

When the lights are on, LED stay ON condition.

（default status）

2) SPEED Attitude and Rate Function

Red Led

① Attitude mode : LED

stay ON condition.

status）

② Rate mode : LED

blinks with one second intervals.

3) Camera function （O

ptional feature

Green Led

① When power is switched on, stay On

condition.

--> Photograph mode （

default status

②

When movie button is pressed, LED blinks with one

second intervals.

--> Video mode

4) Binding

and Transmitter status function.

Red Led （Status Led

）

① Show Power and Binding

② If device is not bou

nd, LED blinks with 0. second

intervals.

③ If device is bound, LED stay ON

condition

< LED arrangement of transmitter >

stay OFF

condition.

When the lights are on, LED stay ON condition.

stay ON condition.

（default

blinks with one second intervals.

ptional feature

）

condition.

default status

）

When movie button is pressed, LED blinks with one

and Transmitter status function.

）

nd, LED blinks with 0. second

condition

.

Status Discription

Red LED

Bind range

Bind status (No

bind)

blinking (1s)

Bind Success,

RX receive O

Range Test

fast blinking

Error

Low Voltage

fast blinking

Sensor Warring

Rx Voltage,

Temp Error

fast blinking

Receive rate low,

No RX

slow blinking

Factory Error

Normal mode

Trim inc/dec

Trim 0%

Program

mode

Program mode

start

1 blink

Program mode

exit

Servo Reverse

(Normal)

Servo Reverse

(Reverse)

ATV 100%

Fail Safe mode

start

2 blink

Fail safe (trim dn,

hold)

Fail safe (trim up,

fail)

Stick

Calibration

Calibration mode

start

3 blink

Stick move done

3 blink

(3times)

Dead range set

Red LED

Green LED Buzzer

blinking (1s)

low beep(1)

on low beep(2)

on

fast blinking

low beep(2)

/2sec

fast blinking

High beep(4)

/2sec

High beep(3)

/2sec

fast blinking

High beep(2)

/2sec

slow blinking

High beep(1)

/2sec

Low beep(1)

/2sec

low beep(1)

/click

High beep(1)

/click

1 blink

low beep(1)

low beep(1)

1 blink

(5times) low beep(1)

2 blink

(5times) low beep(2)

High beep(1)

2 blink

low beep(2)

1 blink

(5times) low beep(1)

2 blink

(5times) High beep(1)

3 blink

3 blink

(3times)

3 blink

(3times) low beep(2)

Dead

blink/3sec

P4

Normal Mode

(1) Basic Operation

- When Power on, t

he last used memory will be bound

Receiver.

-

In case of No Receiver connection, if you press the

button of left stick for 1sec,

it will search Receiver.

- if Receiver

is not searched, it will be repeated until

Receiver, and you can bind with new Receiver by

pressing BIND/LED Switch.

(2) BIND mode

In case of no having receiver, which is already saved in

memory, then you can bind with new receiver by

pressing BIND Switch.

If Receive Signal is normal, RED LED wi

In case of Waiting Receiver or Range warning, RED

LED will be slow blinked.

(3) Range Test mode

Functional switch:

Press shortly button of

SNAP once.

A

fter Binding with Receiver, if you shortly press this

functional Switch, Range Test mode will operate for

90sec.

While operating Range mode, if you shortly press this

switch, Range test mode will be ended.

A

t Range mode operation, RED LED will blink quickly

and make buzzer sound.

After 90sec, Beep sound will be

occurred

enter to Main Mode.

(4) Low Battery Voltage warning

RED LED will do fast blinking. (

RED LED indicate State)

At under 3200V, Warning will be announced and at

3300V, warning will be removed.

3Cell Alkaline Battery will be used.

Important Point :

hile Binding, Transmitter should always have distance

from the Receiver. At least 1m should h

ave.

Otherwise, it might be connected to Return channel, and

do malfunction.

he last used memory will be bound

to

In case of No Receiver connection, if you press the

it will search Receiver.

is not searched, it will be repeated until

find

Receiver, and you can bind with new Receiver by

In case of no having receiver, which is already saved in

memory, then you can bind with new receiver by

If Receive Signal is normal, RED LED wi

ll be turned On.

In case of Waiting Receiver or Range warning, RED

Press shortly button of

SPEED +

fter Binding with Receiver, if you shortly press this

functional Switch, Range Test mode will operate for

While operating Range mode, if you shortly press this

t Range mode operation, RED LED will blink quickly

occurred

one time, and

RED LED indicate State)

At under 3200V, Warning will be announced and at

hile Binding, Transmitter should always have distance

ave.

Otherwise, it might be connected to Return channel, and

Program Mode

(

workable only at Binding condition

(1)

Condition of Basic Operation

Enter to Program mode

simultaneously for 2sec.

Release Program mode

simultaneously for a second.

Indication of

Program mode : Red Led

once per a second inter al

.

Program mode : Blink

once per a second inter al

(2) Saving Data

50pcs of last used

Data could be sa ed.

(3) Adjustment of

Servo End

In

case of Stick Calibration, Default will

value, Customer can adjust trim as below

- 100% --

> 1100us ~ 1900us

At Max. or Min. Positi

on of Stick,

Range of Trim is available

0% ~ 100%

I

f move to 100% position, High Beep sound will be

occurred once.

-

Red Led will be blinked once per a second interval

Program mode : Blink

once per a second interval

(4) Servo Reverse Set

This is used

when change Servo direction.

All sticks

are on neutral pos

switch to Max. or Min. Posi

tion.

I

f press Power switch with pressed trim switch to Max. or

Min. position, Normal mode and Reverse mode will be

changed.

- Indication of Servo Rece

i

blinked

once per a second interval

-

Normal mode : Green LED will be blinked once per a

second interval.

workable only at Binding condition

)

Condition of Basic Operation

: Press two Stick Switch

: Press two Stick Switch

simultaneously for a second.

Program mode : Red Led

will be blinked

once per a second inter al

Data could be sa ed.

Servo End

Position

case of Stick Calibration, Default will

be 100%. At this

value, Customer can adjust trim as below

way.

> 1100us ~ 1900us

on of Stick,

adjust Trim Switch

0% ~ 100%

~ 1 0%.

f move to 100% position, High Beep sound will be

Red Led will be blinked once per a second interval

once per a second interval

when change Servo direction.

are on neutral pos

ition, and move the trim

tion.

f press Power switch with pressed trim switch to Max. or

Min. position, Normal mode and Reverse mode will be

i

ver mode : Red Led will be

once per a second interval

Normal mode : Green LED will be blinked once per a

P5

-Reverse mode :

Green LED will be blinked

second interval.

Program mode : Blink

once per a second interval

Normal mode : Blink

once per a second interval

(Repetition times)

Reverse mode : Blink twice per a second interval

(Repetition times)

(5) Fail Safe Set

Press right

stick switch for a second at Program mode.

Press trim button

per channels and select Fail pos mode

and Hold it.

Whenever press Trim button, Setting-

condition will be

transferred to Receiver.

If press right-

stick switch for a second, Fail safe setting

mode will be ended.

- Indication of Fail Safe mode : RED

LED will be blinked

twice per a second interval.

- Pos mode :

If Trim is UP, it is a Fail safe mode, and

Green LED will be blinked twi

ce per a second interval.

(Repetition times)

- Hold mode : If Trim is Down, it is a

Green LED will be blinked once per a second interval.

(Repetition times)

Program mode (Failsafe mode):

Blink twice per a

second interval

Hold mode : Blink

once per a second interval (

times)

Pos mode :

Blink twice per a second interval (

times)

Green LED will be blinked

twice per a

once per a second interval

once per a second interval

Reverse mode : Blink twice per a second interval

stick switch for a second at Program mode.

per channels and select Fail pos mode

condition will be

stick switch for a second, Fail safe setting

LED will be blinked

If Trim is UP, it is a Fail safe mode, and

ce per a second interval.

Hold mode, and

Green LED will be blinked once per a second interval.

Blink twice per a

once per a second interval (

Repetition

Blink twice per a second interval (

Repetition

How to do Stick Calibration

(1) Enter to

Stick Calibration Mode

Turn On the Radio

, in state of

I

f enter to Mode, RED LED will blink 3 times.

Stick calibration mode

: Blink 3 times per a second

interval

(2) Set Stick Calibration

Move all sticks from side to Side and

position.

A

fter operated last stick, hold it to middle position for

3Seconds.

If Set is done,

Red and Green LED will blink 3Times at

same time.

Stick calibration mode

Blink 3 Times per a second interv

※

after that, it is moved to Dead Range set mode

automatically.

(3) Dead range set

This is for keep Neutral

position

accurate Neutral value.

Dead range set about Neutral position, is set by trim

switch up and down.

It can be settable

from 1 to 6 steps.

※ in case of Throttle CH1

, there is no spring, Do not set.

(

only set for CH2, CH3, CH4

Green LED will blink depends on Neutral set steps.

F

or example, if you set Dead range to 6%, LED will

blink 4time

s per a second interval.

Dead range mode

Blink 3times per a sec interval.

Dead range set

Blinks depends of setting value

I

f set is done, press left stick button for 2 sec.

Stick Calibration Mode

, in state of

pressing left stick switch.

f enter to Mode, RED LED will blink 3 times.

: Blink 3 times per a second

Move all sticks from side to Side and

back to middle

fter operated last stick, hold it to middle position for

Red and Green LED will blink 3Times at

Stick move done

Blink 3 Times per a second interv

al

after that, it is moved to Dead Range set mode

position

, in case of they have no

Dead range set about Neutral position, is set by trim

from 1 to 6 steps.

( 0, 2, 4, 6, 8, 10% )

, there is no spring, Do not set.

only set for CH2, CH3, CH4

)

Green LED will blink depends on Neutral set steps.

or example, if you set Dead range to 6%, LED will

s per a second interval.

Blink 3times per a sec interval.

Blinks depends of setting value

(6 steps)

f set is done, press left stick button for 2 sec.

P6

안안안안

(1) KC 인증

Graupner mz-8 Transmitter

KCC

인인인인

: MSIP-CRM-sjr-16007500

(2)

Conformite Europeenne

Product(s): Graupner mz-8 Transmitter,

(3)

FCC Information

Graupner mz-8 Transmitter

FCC ID: SNL-16007500

FCC Statement

1. This device complies with Part 15 of the FCC ules. Operation is

subject to the following two conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received, including

interference that may cause undesired operation.

2. Changes or modifications not expressly approved by the party

responsible for compliance could void the user

‘

s authority to operate

the equipment.

• NOTE

This equipment has been tested and found to comply with the limits for

a Class B digital device, pursuant to Part 15 of the FCC ules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment

generates uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment

off and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

- eorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- _Connect the equipment into an outlet on a circuit different from that

to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

• FCC radiation exposure statement

This equipment complies with FCC radiation exposure limits set forth

for an uncontrolled environment.

◎

Notes on environmental protection

This symbol on the product, user

manual or packaging indicates that this

product must not be disposed of with

other household waste at the end of its

life. It must be handed over

to the applicable collection point for the

recycling of electrical and electronic

equipment.

The materials are recyclable as marked. By recycling,

material reusing or other forms of scrap usage you are

making an important contribution to environmental

protection.

Batteries and accumulators must be removed from the

device and disposed of at an appropriate collection point.

Please inquire if necessary from the local authority for

the appropriate disposal site.