GRASS VALLEY BDS-1602CP Manual de usuario

MANUAL PART NO. 04-050466-002 Rev. 2

MARCH 10, 2003

INSTALLATION MANUAL

TRITON routing switcher

Serial Digital Video Router 16x2

With Local Control Panel

Product model no. TTN-BDS-1602CP

the most watched worldwide

Headquarters

Thomson Broadcast Systems

17 rue du Petit Albi - BP 8244

95801 Cergy Pontoise Cedex

FRANCE

Thomson Broadcast and

Media Solutions, Inc.

P.O. Box 599000

Nevada City, CA 95959-7900

USA

Copy

Triton are trademarks of Thomson. Specifications subject to change without notice.

For customer service, please call (800) 547-8949. For comments or questions concerning this manual, please

contact: Technical Publications Department, P.O. Box 30816, Salt Lake City, Utah 84130 USA. Phone: (801)

972-8000. Fax: (801) 977-1602. Email: SLCtechpubs@THmulti.com

iii

Contents

Electromagnetic Radiation Notice v

Hardware Warranty and Software License vi

Parts and Service vi

Revision history vii

1General 1

1.1 Specifications 1

1.2 Connection drawing 1

2Power connection 2

3Connecting the BDS-1602CP to your PC 2

3.1 Selection of router level 2

3.2 Pin-out of RS-232 connector 2

3.3 Maximum cable length 2

4NCB connection 3

4.1 Several routers in one system 3

4.2 Connecting control panels 3

4.3 Pin-out and cable type 4

4.3.1 RJ45 connectors 4

4.3.2 5-pin DIN connectors 4

4.3.3 RJ45 to 5-pin DIN converter 5

4.4 Control bus structure 5

4.5 Maximum distance between NCB devices 5

4.6 Control Bus configuration notes 5

5Router configuration 7

5.1 Router level 7

5.2 Router extension mode 8

5.3 VIT mode 8

5.4 Programming of restrictions 9

6Connecting video signals to the BDS-1602CP 9

7Input extension 9

8Control and connection of Triton systems, interface protocol 10

8.1 Important notes regarding the Triton Control Protocol 10

8.1.1 Binary Code 10

8.1.2 Echo 10

8.1.3 RS-422 Matrixes 10

8.1.4 Timeout 10

8.2 Basic principles 10

8.2.1 Example: A single unit with no NCB connected 10

8.2.2 Example: Several units connected by NCB 11

8.3 RS232 11

8.4 NCB 11

8.5 Commands 12

8.5.1 Audio crosspoint set 12

8.5.2 Audio crosspoint set acknowledge 12

8.5.3 Video crosspoint set 12

8.5.4 Video crosspoint set acknowledge 13

8.5.5 Crosspoint status request 13

9Control panel operation 14

9.1 Front panel drawing 14

9.2 PANEL ENABLE button 14

9.3 V/A TOGGLE button 14

9.4 Operating crosspoints 14

Electromagnetic Radiation Notice

The following information is given to note compliance with the United States Government Federal Communications

Commission (FCC) Rules (47 CFR Part 15) designed to limit interference to radio and TV reception. The ruling establishes

measurement procedures and frequency criteria for Class A computing devices (commercial and industrial applications) with

the following conduction and radiation limits:

CLASS A COMPUTING DEVICE: CONDUCTION LIMIT (Part 15.812)

Frequency (MHz) Maximum RF Line Voltage (uV)

0.45 - 1.6 1000

1.6 - 30 3000

CLASS A COMPUTING DEVICE: RADIATION LIMIT (Section 15.810)

Frequency (MHz) Distance (meters) Field Strength (uV/m)

30 - 88 30 30

88 - 216 30 50

216 - 1000 30 70

The policy of Thomson is one of continual development and improvement. For that reason Thomson uses components and

manufacturing techniques that provide the current state-of-the-art suppression of electromagnetic radiation. This equipment, in

production before October 1, 1981, has not been tested to the above listed measurements. However, equipment such as this

delivered after October 1, 1983 will have the measurements on record at the factory. Therefore, in compliance with the stated

FCC Regulation, the following information is provided for the user:

NOTE

Interference to Radio Communications

This equipment generates, uses, and can radiate radio frequency energy and if not installed and used

in accordance with the instruction manual, may cause interference to radio communications. As

temporarily permitted by regulation it has not been tested for compliance with the limits for Class A

computing devices pursuant to Subpart J of of Part 15 of FCC Rules, which are designed to provide

reasonable protection against such interference. Operation of this equipment in a residential area

is likely to cause interference in which case the user at his own expense will be required to take

whatever measures may be required to correct the interference.

Hardware Warranty and Software License

Please contact your local Thomson representative for

hardware warranty and software license information.

Parts and Service

Thomson maintains a full stock of replacement parts available for immediate shipment.

NORTH AMERICA PARTS AND SERVICE

Please call toll-free 1-800-547-8949.

You will be switched automatically to the parts and service representative nearest you.

For email correspondence: [email protected]

Internet: http://www.thomsongrassvalley.com

INTERNATIONAL PARTS AND SERVICE

Contact your Thomson representative.

vii

Revision history

Current revision of this document is the uppermost in the table below.

Revision Replaces Date Change Description

2 1 10/03/03 Updated with new Thomson/GVG design.

1 0 30/01/01 Corrected error in baud rate setting

0 - 10/10/00 Initial Revision

BDS-1602CP Rev. 2

1 General

The BDS-1602CP is a 16x2 serial digital video router with vertical interval switching. This state of the art

router provides maximum quality with a data rate of up to 360Mbit/s and automatic cable equalizing. The

BDS-1602CP offers the possibility to expand the router in the input direction up to 64x2. The

BDS-1602CP is well suited for all demanding routing tasks in digital studio and broadcast environments.

The built-in RS-232 interface allows the user to control the router via the Triton Router Control System

PC software with many operational features. The control bus allows linking the unit to the BES-1602 or

BAS-1602 audio router thus creating a 16x2 AFV router. One or several Triton remote control panels can

control the BDS-1602CP as well. The built-in control panel provides buttons for selection of inputs and 4

function keys with following functions:

• OUTPUT 1 Assigns input buttons to output 1

• OUTPUT 2 Assigns input buttons to output 2

• AUDIO / VIDEO Enables Audio, Video or AFV

• ENABLE Enables panel

1.1 Specifications

Data rate NRZ: 143Mbps - 360Mbps

VIT input: Comp. Video 1Vpp, 300mV sync, 75 ohms

Number of inputs: 16 terminated

Equalisation: Automatic up to 250m (RG59)

Number of outputs: 16

Impedance: 75 ohms

Return-loss: > 16dB (10MHz-270MHz)

Signal level: 800mV fixed, 75 ohms load

Rise/fall time: typ. 0.7ns

Connector: BNC

AC power: External power supplies 100 - 260 VAC

DC power: +5V, connector DB9 male

Dimensions: 483 x 44 x 280 mm (19”, 1RU)

1.2 Connection drawing

Configuration switch

Video input section Video outputs

NCB1Vertical Interval Trigger Extension Extension

Router Output

Power connector RS-232 port

1Network Control Bus. The protocol of this bus is equal, and compatible to the MIDI bus protocol.

BDS-1602CP Rev. 2

2 Power connection

Do not connect mains to the desktop power supply before connecting the power supply to the

router.

Connect the DB9 female connector from the desktop power supply to the main unit. Tighten the screws to

assure a proper contact. To connect mains to the desktop power supply you need a mains cord with IEC

320 connector.

The BDS-1602CP is normally delivered with the desktop power model AC ±5V / 10W. Upon customer

request, BDS-1602CP can also be delivered with DC ±5V / 30W, which may be fed by a 36 – 72 VDC

mains power source. A Frame mounted power supply solution is also available.

Please refer to the latest Triton Product Catalogue for power supply types, or call Thomson Grass Valley

for this information.

If any third party power supply is used the BDS-1602CP router requires ±5V DC with a minimum current

of 600mA. The following pin-out is used on the DB9 male power connector:

Pin 1 0V

Pin 2 +5V

Pin 6 -5V

3 Connecting the BDS-1602CP to your PC

For connection to a PC with Triton Router Control System, the RS-232 interface is used. The RS-232 port

on all Triton devices uses the standard DCE pin-out, see pin-out table under 4.3.

A standard modem cable can be used for connecting the router to the PCs serial port.

3.1 Selection of router level

The router level depends on the system configuration the router is going to work with. See chapter 5 for

more information. All routers are delivered with default level 1. Triton Router Control System offers the

control of up to 16 different routers or combinations of routers.

3.2 Pin-out of RS-232 connector

The DB9 female connector for the RS-232 port has the following pin-out:

Pin 2 Tx

Pin3 Rx

Pin 5 GND

3.3 Maximum cable length

The maximum cable length for an RS-232 connection is per definition 15m. Longer distances can be

installed depending on the environmental conditions of the installation site. It is the responsibility of the

installer / user to secure a proper installation of the RS-232 connection.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Enrutador de red de GRASS VALLEY

GRASS VALLEY

GRASS VALLEY SIRIUS SCR 1616-12G Manual de usuario

GRASS VALLEY

GRASS VALLEY PROFILE XP PVS Series Manual de lista de piezas

GRASS VALLEY

GRASS VALLEY CR6400 Series Manual de usuario

GRASS VALLEY

GRASS VALLEY CR Series Manual de usuario

GRASS VALLEY

GRASS VALLEY APEX - Manual

GRASS VALLEY

GRASS VALLEY Profile XP PVS1000 Manual de usuario

GRASS VALLEY

GRASS VALLEY PROFILE XP PVS Series Manual de lista de piezas

GRASS VALLEY

GRASS VALLEY TRITON TTN-BAV-0808 Manual de usuario

GRASS VALLEY

GRASS VALLEY IQH4B Manual de usuario

GRASS VALLEY

GRASS VALLEY K2 BASECAMP EXPRESS Manual de usuario

GRASS VALLEY

GRASS VALLEY NV8500 Series Manual de usuario

GRASS VALLEY

GRASS VALLEY 8900NET - Manual de usuario

GRASS VALLEY

GRASS VALLEY Profile XP PVS2000 Manual de usuario

GRASS VALLEY

GRASS VALLEY PROFILE XP PVS Series Manual de lista de piezas

GRASS VALLEY

GRASS VALLEY TRINIX NXT - Manual de usuario

GRASS VALLEY

GRASS VALLEY Profile XP PVS3000 Manual de usuario

GRASS VALLEY

GRASS VALLEY ACAPPELLA - Manual de usuario

GRASS VALLEY

GRASS VALLEY TRINIX NXT - Manual de usuario

GRASS VALLEY

GRASS VALLEY Trinix Manual técnico

GRASS VALLEY

GRASS VALLEY CR6400 Family Manual de usuario

GRASS VALLEY

GRASS VALLEY Profile XP PVS1100 Manual de usuario

GRASS VALLEY

GRASS VALLEY Profile XP PVS2000 Manual de usuario

GRASS VALLEY

GRASS VALLEY L1102101 Manual de usuario

GRASS VALLEY

GRASS VALLEY Triton Plus Manual de usuario

Manuales populares de Enrutador de red de otras marcas

Allnet

Allnet ALL0333AU Manual de usuario

HomeSeer

HomeSeer HT-SEL Manual de usuario

Sercomm

Sercomm Genesis OC3505D Manual de usuario

Billion

Billion BIPAC 5102 Series Manual de usuario

TP-Link

TP-Link TD-8817 Manual de usuario

Motorola

Motorola MR1900 Manual de usuario

Digi

Digi IX14 Manual de usuario

Cisco

Cisco NCS 540 Manual

XAVi

XAVi X8821e Manual de usuario

BEC

BEC 6200WZL Manual de usuario

MikroTik

MikroTik hAP ac3 Series Manual de usuario

Korenix

Korenix JetNet 5428G Series Manual de usuario

NETGEAR

NETGEAR FS526T - Switch Manual de usuario

Korenix

Korenix JetNet 5710G Series Manual de usuario

Automated Logic

Automated Logic ZN551 Manual del propietario

Cisco

Cisco ASR 1000 Series Manual del operador

EnGenius

EnGenius ESR-9710 Manual de usuario

Cisco

Cisco 805 Series Instrucciones de funcionamiento y seguridad