Grandstream Networks HT818 Manual de instrucciones
Grandstream Networks, Inc.
HT818
Administration Guide
HT818 – Administration Guide
The HT818 analog telephone adapter provide transparent connectivity for analog phones and faxes to the world of internet voice.
Connecting to any analog phone, fax or PBX, the HT818 is an effective and flexible solution for accessing internet-based telephone
services and corporate intranet systems across established LAN and internet connections. This Grandstream Handy Tones are a new
addition to the popular Handy Tone ATA product family. This manual will help you to learn how to operate and manage your HT818
analog telephone adaptor and make the best use of their many upgraded features including simple and quick installation, 3- way
conferencing, direct IP-IP Calling, and new provisioning support among other features. The HT818 is very easy to manage and
configure, and it is specifically designed to be an easy to use and affordable VoIP solution for both the residential user and the
teleworker.
PRODUCT OVERVIEW
The HT818 is an 8 ports analog telephone adapter (ATA) that allow users to create a high-quality and manageable IP telephony
solution for residential and office environments. Their ultra-compact size, voice quality, advanced VoIP functionality, security protection
and auto provisioning options enable users to take advantage of VoIP on analog phones and enables service providers to offer high
quality IP service. The HT818 is an ideal ATA for individual use and for large scale commercial IP voice deployments since it permits
small and medium businesses to create integrated IP and PSTN telephony systems that efficiently manage communication costs.
HT818’s inclusion of an integrated NAT router and dual 10/100/1000Mbps Ethernet WAN and LAN ports enables a shared broadband
connection between multiple Ethernet devices as well as the extension of VoIP services to analog phones.
Feature Highlights
The following table contains the major features of the HT818:
HT818
Support dual 10/100/1000Mbps Ethernet port, 2 SIP profiles through 8 FXS ports
Support 3-way voice conferencing.
Support wide range of caller ID formats.
Support advanced telephony features, including call transfer, call forward, call-
waiting, do not disturb, message waiting indication, multi-language prompts,
flexible dial plan and more.
Support T.38 Fax for creating Fax-over-IP.
TLS and SRTP security encryption technology to protect calls and accounts.
Automated provisioning options include TR-069 and XML Config files.
Failover SIP server automatically switches to secondary server if main server loses
connection.
Use with Grandstream’s UCM series of IP PBXs for Zero Configuration provisioning.
Strong AES encryption with security certificate per unit
GR-909 Line Testing Functionalities.
Exceptional voice quality with wide-band HD codec
Table 1: HT818 Features at a Glance
HT818 Technical Specifications
The following table resumes all the technical specifications including the protocols/standards supported, voice codecs, telephony
features, languages and upgrade/provisioning settings for the HT818.
Interfaces
Telephone
Interfaces Eight (8) RJ11 FXS ports
Network Interface Two (2) 10/100/1000 Mbps Ethernet port (RJ45).
LED Indicators POWER, LAN, WAN, PHONE1, PHONE2, PHONE3, PHONE4, PHONE 5, PHONE 6, PHONE 7 and PHONE 8.
Factory Reset
Button Yes.
Voice, Fax, Modem
Telephony Features Caller ID display or block, call waiting, flash, blind or attended transfer, forward, hold, do not disturb, 3-way
conference.
Voice Codecs G.711 with Annex I (PLC) and Annex II (VAD/CNG), G.723.1, G.729A/B, G.726, G722, iLBC, OPUS, dynamic
jitter buffer, advanced line echo cancellation.
Fax over IP T.38 compliant Group 3 Fax Relay up to 14.4kpbs and auto-switch to G.711 for Fax Pass-through.
Short/Long Haul
Ring Load 2 REN, up to 1km on 24AWG line
Caller ID Bellcore Type 1 & 2, ETSI, BT, NTT, and DTMF-based CID.
Disconnect
Methods Busy Tone, Polarity Reversal/Wink, Loop Current.
Signaling
Network Protocols TCP/IP/UDP, RTP/RTCP, HTTP/HTTPS, ARP/RARP, ICMP, DNS, DHCP, NTP, TFTP, FTP/FTPS, SSH, STUN, SIP
(RFC3261), SIP over TCP/TLS, SRTP, TR-069.
QoS Layer 2 (802.1Q VLAN, SIP/RTP 802.1p) and Layer 3 (ToS, DiffServ, MPLS).
DTMF Methods In-audio, RFC2833 and/or SIP INFO.
Provisioning and
Control HTTP, HTTPS, FTP, FTPS, SSH, TFTP, TR-069, secure and automated provisioning using TR069, syslog.
Security
Media SRTP.
Control TLS/SIPS/HTTPS.
Management Syslog support, SSH, remote management using web browser.
Physical
Universal Power
Supply
Input: 100-240VAC, 50-60Hz
Output: 12V/1.5A.
Environmental
Operational: 32 – 104 F or 0º – 40ºC.
Storage: 14 – 140 F or -10º – 60ºC.
Humidity: 10 – 90% Non-condensing.
Dimensions and
Weight
Dimension : 36 x 120 x 180 mm (H x W x D)
Weight: 356g
Compliance
Compliance FCC/CE/RCM.
Table 2: HT818 Technical Specifications
GETTING STARTED
This chapter provides basic installation instructions including the list of the packaging contents and also information for obtaining the
best performance with the HT818.
Equipment Packaging
The HT818 ATA package contains
Figure 1: HT818 Package Contents
HT818 Ports Description
The following figure describes the different ports on the back panel of the HT818.
Figure 2: HT818 Back Panel
Phone 1- 8 (HT818) Connects the analog phones / fax machines to the phone adapter using an RJ-11 telephone cable.
o o
o o
Check the package before installation. If you find anything missing, contact your system administrator.
WAN Connects the phone adapter to your router, switch or modem using an Ethernet RJ45 network cable.
co
LAN Connects the phone adapter to your PC or switch using an Ethernet RJ45 network cable.
DC Power Connects the phone adapter to PSU (12V – 1.5A).
Reset Factory reset button. Press for 7 seconds to reset factory default settings.
Table 3: Definition of the HT818 Connectors
Connecting HT818
The HT818 is designed for easy configuration and easy installation, to connect your HT818, please follow the steps below:
Scenario 1: Connecting the HT818 using WAN Port
When connecting HT818 using the WAN port, it will act as simple DHCP Client.
1. Insert a standard RJ11 telephone cable into the phone ports and connect the other end of the telephone cable to a standard
touch-tone analog telephone.
2. Connect the WAN port of the HT818 to a router, switch or modem using an Ethernet cable.
3. Insert the power adapter into the HT818 and connect it to a wall outlet and make sure to respect the technical specifications of the
power adapter used.
4. Power, WAN and Phone LEDs will be solidly lit when the HT818 is ready for use.
Scenario 2: Connecting the HT818 using LAN Port
When connecting the HT818 using the LAN port, it will act as a router and DHCP serving addresses, the devices connected with HT818
LAN will pull DHCP addresses from your HT818.
1. Insert a standard RJ11 telephone cable into the phone ports and connect the other end of the telephone cable to a standard
touch-tone analog telephone.
2. Connect a computer or switch to the LAN port of the HT818 using an Ethernet Cable.
3. Insert the power adapter into the HT818 and connect it to a wall outlet and make sure to respect the technical specifications of the
power adapter used.
4. Power, LAN and Phone LEDs will be solidly lit when the HT818 is ready for use.
Please make sure to enable NAT Router under Web GUI 🡪 Basic Settings 🡪Device Mode.
Figure 3: Connecting the HT818
HT818 LEDs Pattern
There are four (4) LED types that help you manage the status of your HT818.
Figure 4: HT818 LEDs Pattern
LED Lights Status
Power LED The Power LED lights up when The HT818 is powered on and it flashes when the HT818 is booting up
WAN LED The WAN LED lights up when The HT818 is connected to your network through the WAN port.
LAN LED The LAN LED lights up when The HT818 is connected to your network through the LAN port.
Phone LED 1- 8
The phone LEDs indicate status of the respective FXS port-phone on the back panel
OFF – Unregistered
ON (Solid Blue) – Registered and Available
Blinking every 500 ms – Off-Hook / Busy
Slow blinking – FXS LEDs indicates voicemail
Table 4: HT818 LEDs Pattern Description
CONFIGURATION GUIDE
The HT818 can be configured via one of two ways:
The IVR voice prompt menu.
The Web GUI embedded on the HT818 using PC’s web browser.
Obtain HT818 IP Address via Connected Analogue Phone
HT818 is by default configured to obtain the IP address from DHCP server where the unit is located. In order to know which IP address
is assigned to your HT818, you should access to the “Interactive Voice Response Menu” of your adapter via the connected phone and
check its IP address mode.
Please refer to the steps below to access the interactive voice response menu:
1. Use a telephone connected to phone ports (FXS) of your HT818.
2. Press *** (press the star key three times) to access the IVR menu and wait until you hear “Enter the menu option “.
3. Press 02 and the current IP address will be announced.
Understanding HT818 Interactive Voice Prompt Response Menu
The HT818 has a built-in voice prompt menu for simple device configuration which lists actions, commands, menu choices, and
descriptions. The IVR menu works with any phone connected to the HT818. Pick up the handset and dial “***” to use the IVR menu.
Menu Voice Prompt Options
Main
Menu
“Enter a Menu
Option”
Press “*” for the next menu option
Press “#” to return to the main menu
Enter 01-05, 07,10, 12-17,47 or 99 menu options
01
“DHCP Mode”,
“Static IP Mode”
“PPPoE Mode“
Press “9” to toggle the selection
If using “Static IP Mode”, configure the IP address information using menus 02 to 05.
If using “Dynamic IP Mode”, all IP address information comes from the DHCP server
automatically after reboot.
If using “PPPoE Mode”, configure PPPoE Username and Password from web GUI to get IP from
your ISP.
02 “IP Address “ + IP
address
The current WAN IP address is announced
If using “Static IP Mode”, enter 12-digit new IP address. You need to reboot your HT818 for
the new IP address to take Effect.
03 “Subnet “ + IP
address Same as menu 02
04 “Gateway “ + IP
address Same as menu 02
05 “DNS Server “ + IP
address Same as menu 02
Menu Voice Prompt Options
07 Preferred Vocoder
Press “9” to move to the next selection in the list:
PCM U / PCM A
iLBC
G-726
G-723
G-729
OPUS
G722
10 “MAC Address”
Announces the MAC address of the unit.
Note: The device has two MAC addresses. One for the WAN port and one for the LAN port. The
device MAC address announced is the address of LAN port.
12 WAN Port Web
Access
Press “9” to toggle between enable / disable.
Default is disabled.
13 Firmware Server IP
Address Announces current Firmware Server IP address. Enter 12-digit new IP address.
14 Configuration Server
IP Address Announces current Config Server Path IP address. Enter 12-digit new IP address.
15 Upgrade Protocol Upgrade protocol for firmware and configuration update. Press “9” to toggle between
TFTP/HTTP/HTTP /FTP/FTPS
16 Firmware Version Announces Firmware version information.
17 Firmware Upgrade
Firmware upgrade mode. Press “9” to toggle among the following three options:
Always check
Check when pre/suffix changes
Never upgrade
47 “Direct IP Calling” Enter the target IP address to make a direct IP call, after dial tone.
86 Voice Mail Access to your voice mails messages.
99 “RESET”
Press “9” to reboot the device
Enter MAC address to restore factory default setting
(See Restore Factory Default Setting section)
“Invalid Entry” Automatically returns to main menu
“Device not
registered”
This prompt will be played immediately after off hook If the device is not registered and the
option “Outgoing Call without Registration” is in NO
Table 5: Voice Prompt Menu
Five success tips when using the voice prompt
“*” shifts down to the next menu option and “#” returns to the main menu
“9” functions as the ENTER key in many cases to confirm or toggle an option.
All entered digit sequences have known lengths – 2 digits for menu option and 12 digits for IP address. For IP address, add 0
before the digits if the digits are less than 3 (i.e. – 192.168.0.26 should be key in like 192168000026. No decimal is needed).
Key entry cannot be deleted but the phone may prompt error once it is detected.
Dial *98 to announce the extension number of the port.
Configuration via Web Browser
The HT818 embedded Web server responds to HTTP GET/POST requests. Embedded HTML pages allow a user to configure the HT818
through a web browser such as Google Chrome, Mozilla Firefox and Microsoft’s IE.
Microsoft Internet Explorer: version 10 or higher.
Google Chrome: version 58.0.3 or higher.
Mozilla Firefox: version 53.0.2 or higher.
Safari: version 5.1.4 or higher.
Opera: version 44.0.2 or higher.
Accessing the Web UI
Via WAN port
For the initial setup, the Web access is by default enabled when the device is using private IP and disabled when using public IP, and
you cannot access the Web UI of your HT818 until it’s enabled, the following steps will show you how to enable it via IVR.
1. Power your HT818 using PSU with the right specifications.
2. Connect your analog phone to phone ports (FXS) of your HT818.
3. Press *** (press the star key three times) to access the IVR menu and wait until you hear “Enter the menu option “.
4. Press 12, the IVR menu will announce that the web access is disabled, press 9 to enable it.
5. Reboot your HT818 to apply the new settings.
Please refer to steps below if your HT818 is connected via WAN port:
1. You may check your HT818 IP address using the IVR on the connected phone.
Please see Obtain the HT818 IP address via the connected analogue phone
2. Open the web browser on your computer.
3. Enter the HT818’s IP address in the address bar of the browser.
4. Enter the administrator’s password to access the Web Configuration Menu.
Via LAN port
Please refer to steps below if your HT818 is connected via LAN port:
1. Power your HT818 using PSU with the right specifications.
2. Connect your computer or switch directly to your HT818 LAN port.
Please make sure to reboot the device after changing network settings (IP Address, Gateway, Subnet…) to apply the new configuration.
The computer must be connected to the same sub-network as the HT818. This can be easily done by connecting the computer to the
same hub or switch as the HT818.
3. Open the web browser on your computer.
4. Enter the default LAN IP address (192.168.2.1) in the address bar of the browser.
5. Enter the administrator’s password to access the Web Configuration Menu.
6. Make sure to reboot your device after changing your settings to apply the new configuration.
Web UI Access Level Management
There are two default passwords for the login page:
User Level Username Password Web Pages Allowed
End User Level user 123 Only Status and Basic Settings
Administrator Level admin admin All pages
Viewer Level viewer viewer View all pages. No changes allowed.
The password is case sensitive with maximum length of 25 characters. When changing any settings, always submit them by pressing
Update or Apply button on the bottom of the page. After submitting the changes in all the Web GUI pages, if a reboot is required, the
web page will prompt the user to reboot by offering a reboot button on the web page.
Saving the Configuration Changes
After users make changes to the configuration, pressing Update button will save but not apply the changes until Apply button is
clicked. Users can instead directly press Apply button. When a reboot is required to apply changes, the web page will prompt the user
to reboot by offering a reboot button on the web page.
Changing Admin Level Password
1. Access your HT818 web UI by entering its IP address in your favorite browser. (the screenshot is taken from an HT80X model since
the same configuration applies to the HT818 model)
2. Enter your admin password (default: admin).
3. Press Login to access your settings.
4. Go to Advanced Settings 🡪 New Admin Password and enter the new admin password.
5. Confirm the new admin password.
6. Press Apply at the bottom of the page to save your new settings.
Figure 5: Admin Level Password
Changing User Level Password
Please make sure that your computer has a valid IP address on the range 192.168.2.x so you can access the web GUI of your HT818.
Otros manuales para HT818
5
Tabla de contenidos
Otros manuales de Adaptador de Grandstream Networks
Grandstream Networks
Grandstream Networks HT701 Manual de usuario
Grandstream Networks
Grandstream Networks HT503 FXO Manual de usuario
Grandstream Networks
Grandstream Networks HT812 Manual de usuario
Grandstream Networks
Grandstream Networks HT802 Manual de usuario
Grandstream Networks
Grandstream Networks HT701 Manual de usuario
Grandstream Networks
Grandstream Networks HT701 Manual de usuario
Grandstream Networks
Grandstream Networks HT-286 Manual de usuario
Grandstream Networks
Grandstream Networks HT801 Manual de usuario
Grandstream Networks
Grandstream Networks HandyTone-386 Manual de usuario
Grandstream Networks
Grandstream Networks Handytone 502 Manual de usuario
Grandstream Networks
Grandstream Networks HT702 Manual de usuario
Grandstream Networks
Grandstream Networks HandyTone 503 Manual de usuario
Grandstream Networks
Grandstream Networks HT704 Manual de usuario
Grandstream Networks
Grandstream Networks HT814 Manual de usuario
Grandstream Networks
Grandstream Networks HT818 Manual de instrucciones
Grandstream Networks
Grandstream Networks HT802 Manual de usuario
Grandstream Networks
Grandstream Networks HT702 Manual de usuario
Grandstream Networks
Grandstream Networks HT701 Manual de usuario
Grandstream Networks
Grandstream Networks HandyTone 386 Manual de usuario
Grandstream Networks
Grandstream Networks Handytone 502 Manual de usuario
