Graco EP2 Manual de usuario

Tabla de contenidos

Otros manuales de Bomba de agua de Graco

Graco

Graco GH 733 HYDRA-SPRAY Manual de operación

Graco

Graco Spindl-Gard SG-1 Manual de operación

Graco

Graco 239923 Manual de operación

Graco

Graco Husky 15120 Manual de uso y cuidado

Graco

Graco Series A Manual de usuario

Graco

Graco Eagle C Series Manual de operación

Graco

Graco Husky 515 series Manual de usuario

Graco

Graco G3 Max Series Manual de usuario

Graco

Graco Husky 205 D110 Series Manual de usuario

Graco

Graco Husky 1050A Manual de instrucciones

Graco

Graco President 24H627 Manual de operación

Graco

Graco 206897 Manual de operación

Graco

Graco Series A Manual de operación

Graco

Graco 24B748 Manual de usuario

Graco

Graco 222-832 Manual de operación

Graco

Graco 231161 Manual de operación

Graco

Graco 5:1 Fire-Ball 300 Manual de usuario

Graco

Graco 233776 Manual de usuario

Graco

Graco Check-Mate 2100 Manual de operación

Graco

Graco Series A Guía de configuración

Graco

Graco ToughTek S340e Manual de uso y cuidado

Graco

Graco Dura-Flo A Series Manual de operación

Graco

Graco 12 VDC EGP Manual de usuario

Graco

Graco Dyna-Star HP Manual de usuario

Manuales populares de Bomba de agua de otras marcas

Neptun

Neptun NPHW 5500 Manual de usuario

Sensidyne

Sensidyne Gilian BDX-II Instrucciones de instalación y funcionamiento

Draper

Draper 47808 Manual de usuario

Trolla

Trolla 12820 Manual de usuario

Sunfab

Sunfab SVH Series Manual de usuario

WilTec

WilTec 50740 Manual de usuario

Fieldmann

Fieldmann FVC 5015 EK Manual de usuario

Everbilt

Everbilt EFSUB5-122HD Manual de usuario

esotec

esotec 101018 Manual de usuario

moyno

moyno 2000 CC Manual de usuario

Becker

Becker BASIC VASF 2.80/1-0.AC230 Manual de usuario

Sykes AmeriPumps

Sykes AmeriPumps GP100M Guía de solución de problemas

DUROMAX

DUROMAX XP WX Series Manual de usuario

BRINKMANN PUMPS

BRINKMANN PUMPS SBF550 Manual de usuario

Franklin Electric

Franklin Electric IPS Manual de usuario

Xylem

Xylem e-1532 Series Manual de usuario

Milton Roy

Milton Roy PRIMEROYAL Manual de usuario

STA-RITE

STA-RITE ST33APP Manual de usuario

Pump Assembly Instructions

EP2 Hose Pump Assembly 406953B

EN

To assemble the roller kit to an EP2 Hose Pump.

For professional use only.

NOTE: Parts included in the kit are marked with an asterisk (*).

See your EP2 Hose Pump Repair Manual for a complete list of

Kit Part Numbers.

1. Remove the cover (12) and gasket (11).

2. Pull the hose out of the bottom of the housing (103) at the

6 o’clock position.

3. Move the eccentric shaft (7) to the 6 o’clock position.

4. Lubricate the eccentric shaft (7) with hose lube. Install

the roller (102*) and the roller retaining ring (8*).

5. Turn the motor fan to move the roller (102) to the 12

o’clock position. Push the hose (103) into the housing.

Use a rubber mallet if the hose is difficult to seat.

Continued.

TI18220a

12

11

1

Lubricate with hose lube.

1

TI18221a

7

8*

102*

TI18224a

102

103

Important Safety Instructions

Before beginning, read all warnings and instructions in this manual

and in your related equipment manuals. Save all instructions. This

manual is only a guide for kit installation. See your EP2 Hose Pump

manual for complete warnings and repair instructions.

All written and visual data contained in this document reflects the latest product information available at the time of publication.

Graco reserves the right to make changes at any time without notice.

Original instructions. This manual contains English. MM 406953

Graco Headquarters: Minneapolis

International Offices: Belgium, China, Japan, Korea

GRACO INC. AND SUBSIDIARIES • P.O. BOX 1441 • MINNEAPOLIS, MN 55440-1441 • USA

Copyright 2011, Graco Inc. All Graco manufacturing locations are registered to ISO 9001.

www.graco.com

Revised June 2012

6. Return the roller (102) to the 6 o’clock position, com-

pressing the hose. It is critical that the roller is at the bot-

tom of the pump to ensure the correct capacity of hose

lube. Reinstall the motor fan cover.

7. Install the gasket (11) and front cover (12). Install the

screws (14) and washers (13). Torque oppositely to 25

in-lb (2.8 N•m).

NOTE: Do not over-tighten the front cover screws. This will

cause the gasket to deform and the pump to leak.

8. Add hose lube as explained in your EP2 Pump Repair

Manual.

NOTICE

The roller must be returned to the 6 o’clock position before

installing the front cover. Failure to do so will result in overfill-

ing the pump with hose lube.

TI18225a

12

11

13

14

102

3

Torque oppositely to

25 in-lb (2.8 N•m).

3