Grace Digital GDI-BTPB300 Manual de usuario
Bluetooth Audio Receiver
GDI-BTPB300
Quick Start Guide
Important Safety Instructions and Warnings
Please read this user guide carefully before using the product.
Warning:
●This product may contain small parts. Keep them out of reach of small children.
●To reduce the risk of fire or electrical shock, do not expose the product to rain or moisture.
●This product may contain chemicals listed in Proposition 65
(http//www.oehha.ca.gov/prop65/prop65_list/Newlist.html)
●This product has a built-in Lithium Ion battery. The battery must NOT be used in or near
an open source or excessive heat.
Caution:
●Do NOT drop, hit or expose the product to strong shock or any kind. This could damage the
product.
●Power source - the product must only be connected to a power supply of the type specified
in the user’s guide or as marked on the product.
●Unplug the power adapter during lightning storms or when unused for long periods of time.
●Heat - keep the product away from heat sources such as radiators, heat registers, stoves or
other appliances that produce heat.
●If you use this product in a car, make sure this product is fixed firmly before driving to avoid
accident or damage. Do NOT attempt to connect or operate this product while driving or
1. Before You Start Using Your 3play Bluetooth Audio Receiver
1
waiting for traffic lights. Route all the cables connected to this product properly so that they
will not interfere with your driving.
●Please retain these safety instructions for future reference.
●Do NOT open to repair. A qualified technician must carry out repair work. All servicing
should be referred to qualified service personnel at www.gracesupport.com.
●Do NOT dispose this product in a landfill. Contact Grace Digital at
http://www.gracesupport.com/ or a certified recycling agent to dispose of the product.
2.1 About Your 3play Bluetooth Audio Receiver
3play is a Bluetooth audio receiver that can be plugged in to any stereo system or speakers using
a 3.5mm analogue, or Toslink digital (SPDIF) cable. It can connect to up to 3 devices
simultaneously. 3play is powered by aptX ®codec technology that enables high-quality audio
over Bluetooth.
Other Bluetooth receivers only allow one device to be connected to the receiver at a time. 3play
allows you to connect 3 Bluetooth enabled devices, and receive music from each one of them
without the need to reconnect. It will switch the music streams automatically when a new device
starts playing music, and pause playing music on the previously playing device.
With 3play, you and your friends will be connected and ready to play music. As soon as you press
PLAY, your phone’s music comes out from the speakers. You don't need others to PAUSE, and
you don't need to disconnect and reconnect which takes a lot of time and causes awkward silences.
2. Product Features
2
When your friend presses PLAY on their phone, their music come out from the speaker and your
music is automatically paused.
With its unique simultaneous multi-connection feature, you and your friends can share the music
you love in a radically new way. You can also switch music streaming between your devices
(phone, tablet, etc.) seamlessly.
2.2 What’s in the Box
2.3 Specifications
- 3play Bluetooth Audio Receiver - USB cable - AC adapter
- 3.5 mm audio cable - User manual
- Bluetooth Protocol: V4.0 - Frequency: 2.402 - 2.483GHz (ISM band)
- Bluetooth Profile: A2DP, AVRCP - Audio Output: Analogue and Digital (Toslink)
- Playtime : 10 + hours from full charge - Memory to pair up to 7 Bluetooth devices
- Built-in rechargeable battery:
Lithium Ion 3.7V 600mAh
- Battery charging time:
approximately 2.5 hours
- Micro USB power input: 5VDC, 1A - AC adapter: 100-240V, 50/60Hz, 1A
- Storage temperature:
14°F to 131°F (-10°C to 55°C)
- Operating temperature:
23°F to 104°F (- 5°C to 40°C)
- Size: 1.97 (L) x 0.79 (W) x 2.28 (D) inches
5.0 (L) x 2.0 (W) x 5.8 (D) cm
- Weight: 1.4 Oz (40 g)
3
3.1 Connecting Your 3play
1) Connect your 3play to a speaker or an audio system with the supplied 3.5mm audio cable
Note:
●If your audio system has a digital input (Toslink), you can use a 3.5mm to Toslink
cable (not supplied) for the connection
●If your speaker or your audio system has RCA input, you can use a RCA adapter
cable (not supplied) for the connection
2) Plug one end of the supplied USB cable into the supplied AC charger and then plug the
other end of the cable into the micro USB port of your 3play.
3. Setting Up Your 3play Bluetooth Audio Receiver
4
3.2 Multi-function Button (MFB) and LED Indicators
Multi-function Button (MFB)
The Multi-function button (MFB) has two functions:
●Press and hold the MFB to turn on or turn off 3play
●Double click the MFB to put 3play into pairing mode
Top facing LEDs
The top LEDs indicate 3play Bluetooth state and battery status
Multi-function Button
Top LEDs
Front LEDs
Device Status LED Indicator
Connectable state, no devices
connected
Blue LEDs blink slowly
Connectable state, one or more
devices
Blue LEDs are solid on. An additional device can be
connected
5
Front LEDs
The 3 front blue LEDs indicate how many devices are connected to 3play. If a front LED blinks,
3play is in Pairing/Discoverable mode and an additional device is ready to connect – up to 3
devices total!
3.3 Turn on or turn off your 3play
1) Turn on
To turn on your 3play, press and hold the MFB button for 1 second. Once 3play is on the
top blue LED’s will blink. If it is connected to powered speakers or stereo system you will
also it hear it play a melody.
2) Turn off
To turn off 3play, press and hold the MFB button for 1 second. Before 3play is off, it will
play a melody and the LED’s will turn off.
Note:
• When 3play is powered by battery and idle or not connected to any device for more than 5
minutes, it will turn off automatically to save battery power.
Pairing/Discoverable state Blue and red LEDs blink fast in an alternating pattern.
Battery status - Full Top red LEDs are off
Battery status - Low Top red LEDs blink fast (once a second)
Battery status - Charging Top red LEDs blink slowly (once every 5s)
6
3.4 Battery charging
When connected to external power source via either a USB connection to a computer or to the
supplied AC adapter, 3play will automatically charge the built-in rechargeable battery.
It is suggested that you charge the 3play completely prior to your first time use on battery power.
It will take proximately 2 to 3 hours to completely charge the battery.
Note:
●The built-in battery charges while 3play is playing audio and plugged into an external power
source
7
4.1. How to Enter Pairing/Discoverable Mode
All your Bluetooth devices need to be “paired” with 3play before they can be connected to 3play.
This is necessary when it is the first time your device connects to 3play, or when you have
“unpaired” or “forgot” your 3play on your device Bluetooth list.
To let your Bluetooth device pair/connect to your 3play, you will need to put your 3play in
Pairing/Discoverable mode.
To put your 3play in Pairing/Discoverable mode, simply double-click the MFB button. Once
3play is in Pairing/Discoverable mode, the top red and blue LED will blink, and one of the front
LEDs will also blink. 3play will play a short tone.
Note:
●3play will stay in Pairing/Discoverable mode for two minutes, after which it will go back
to connectable state if no devices are connected within those two minutes.
4. Pairing and Connecting Device to Your 3play Bluetooth Audio
8
4.2 Pairing and Connecting an Apple iOS Device
If your Apple iOS device has never been paired to 3play or “forgot” 3play, please follow the steps
below.
1) Turn 3play on
2) Put 3play in pairing mode
3) On your iOS device, go to Settings -> Bluetooth
4) On the list of discovered devices, select 3playJambadoo. This will pair and connect you
iOS device to 3play. Once it’s connected, the top blue LEDs turn solid blue and the front
LED turns solid blue. 3play will play a short tone.
4.3 Connecting a Paired Apple iOS Device
If your Apple iOS device has been paired to 3play and you want to connect it to the 3play, please
follow the steps below.
1) Turn 3play on
2) On your iOS device, go to Settings -> Bluetooth
3) On the list of discovered devices, select 3playJambadoo. This will connect you iOS device
to 3play. Once it’s connected, the top blue LEDs turn solid blue and the front blink LED
turns solid blue. The 3play will play a short tone.
9
Tabla de contenidos
