FUNCTIONS
ON/OFF
Under Standby Mode, press the knob (or remote controller button), the heater
enters into the Normal Mode, works with highest power, and automatically set the
temperature at 35ºC, or recover to the state of the last standby state (Note: when the power
is not cut off). Repeatedly press the knob until the heater recovers to the Standby state.
Mode Switch
Under Working State, press the button (or remote controller button), the heater
switches between Normal Mode –fast-heating model -- Energy Saving Mode
--- Anti-Freezing Mode ---Normal Mode.
Level Switch
Under normal mode, repeatedly press the knob (or remote controller button) to
switch between High (orange) --- Middle (green) --- Low (red) --- OFF --- High (orange).
Temperature Setting
Under normal mode, press the button to check the current setting temperature, and
the temperature icon flashes. Turn the knob to adjust the setting temperature, it will
automatically exit the enquiry setting interface if it is not operated within 3s, and display
the setting temperature.
Timing ON
Under OFF state, press the button (or remote controller button) to enter into the
timing enquiry interface, the setting time and timing icon flashed, turn the knob to
adjust the setting time, it will automatically exit the enquiry setting interface if it is not
operated within 3s. When the setting is 0, it cancels timing ON.
After reaching the timing ON time, the heater automatically turns on and works at the
last standby state. The time setting range is 0-24H, the adjustment unit in hour.
Timing OFF
Under ON state, press the button (or remote controller button) to enter into the
timing enquiry interface,
turn the knob to adjust the setting time, it will automatically exit
the enquiry setting interface if it is not operated within 3s. When the setting is 0, it
cancels timing OFF. After reaching the timing OFF time, the heater automatically enters
into the standby state and stops work. The time setting range is 0-24H, the adjustment
unit in hour.
Remote
and
When working mode is on, press the button on control panel, press " " or " " to
adjust temperature within 5ºC to 35ºC. Press the button on remote controller, press "
" or " " to adjust time within 0 to 24 hours.
