Goodwe ES Manual de uso y cuidado

Goodwe ES nad EM Firmware Updating Guide:

1. Please read instructions carefully before updating.

2. Please Note EM inverters may be damaged when updating with PV on.

3. Please do not se the EZ flash if the unit has the most current version on:

The firmware update for Goodwe ES and EM is EZ flash (master and slave 1515) Data send 08.

For EM is EZ flash (master and slave 0404) Data send 08.

The new ES inverters (shipped after march 2019) will not require EZ flash update only the Data

send.

Equipment needed:

• • Laptop or PC

• • SB male to male cable

• • EZFlash (program)

• • Data Send (Program)

The SB cable can be purchased at any Matrix store

Download link for firmware:

https://www.dropbox.com/sh/yuqyso46vwg1xel/AAABqqK7DWcTFFi00QnB1Oqxa?dl=0

The dropbox download link contains all the files needed for updating the EM or ES Goodwe inverter,

latest versions are regularly uploaded.

STEP 1

Download the software and latest firmware files.

It is advised to do this before traveling to site in case of any internet or computer issues. Create a folder

on your desktop named Goodwe to copy the downloads to.

Important: Choose files that match your inverter model, either EM (2.3KW) or ES (4.6KW).

Files are named appropriately to avoid confusion.

For the EM, chose file named “EM Full firmware” download the two files ending in “slave.out” and

“master.out”.

In addition download all the files in the Ezflash folder, this is the program for updating the firmware.

For the ES, chose file named “ES Full firmware” download the two files ending in “slave.out” and

“master.out”. In addition download all the files in the Ezflash folder, this is the program for updating the

firmware.

STEP 2

Turn off all power sources to inverter starting from grid, PV and then the batteries. You can power

on the inverter from either the batteries or Grid.

Please NOTE (please Note EM inverters may be damaged when updang with PV

Remove the Wi-Fi dongle from the inverter during updates

The SB port on the ES inverter is under the panel marked “Meter”. nscrew the four screw and

remove the panel.

The SB port on the EM inverter is under the Wi-Fi antenna.

Connect computer and inverter with the male to male SB cable.

STEP 3

Open the EzFlash program

ARM box should be selected

Click on select file and choose the appropriate files

Press ok.

Then select the

Update Both button.

Wait for the update to finish, it takes about 5 minutes.

ntil you see: Reset complete!

The update process should not be interrupted.

The update will run through the master cpu will update first.

The Slave cpu will then update.

Once the updates have complete successfully the system will reset.

On reset complete you can close the EzFlash application and proceed to step 3 to update

ARM firmware.

Step3

To update the ARM firmware use the data send application.

(English version not available)

Open the DATA SEND application.

1. Please ensure SB Open Success when connected to inverter and the grid and loads are switched

off. Just have one DC source on the inverter. Find the tool (DataSend.exe), you will need this to

update the ARM firmware.

2. Select the file for upadate (first button shown below)

3. Run the update as shown below, Wait for the pdate to complete

Este manual sirve para los siguientes modelos

1

Tabla de contenidos

Otros manuales de Inversor de Goodwe

Goodwe

Goodwe BT Series Instrucciones de funcionamiento originales

Goodwe

Goodwe BT Series Manual de usuario

Goodwe

Goodwe ET Series Manual de usuario

Goodwe

Goodwe ES Series Manual de usuario

Goodwe

Goodwe ET Series Manual de usuario

Goodwe

Goodwe ESA5000 Manual de usuario

Goodwe

Goodwe ES Series Manual de usuario

Goodwe

Goodwe EH Series Manual de usuario

Goodwe

Goodwe ET Series Manual de usuario

Goodwe

Goodwe ES Series Manual de usuario

Goodwe

Goodwe SUNSHINE TILE Manual de usuario

Goodwe

Goodwe HT 73-136kW Series Manual de usuario

Goodwe

Goodwe SDT G2 Series Manual de usuario

Goodwe

Goodwe MS Series Manual de usuario

Goodwe

Goodwe MIS Series Manual de usuario

Goodwe

Goodwe UT Series Manual de usuario

Goodwe

Goodwe MS Series Manual de usuario

Goodwe

Goodwe SCB2000 Manual de usuario

Goodwe

Goodwe DNS Series Manual de usuario

Goodwe

Goodwe XS Series Manual de usuario

Goodwe

Goodwe SMT Series Manual de usuario

Goodwe

Goodwe HT Series Manual de usuario

Goodwe

Goodwe EH Series Manual de usuario

Goodwe

Goodwe GW10K-DT Manual de usuario

Manuales populares de Inversor de otras marcas

Fourgroup

Fourgroup Easy Manual de usuario

Velleman

Velleman PI300M Manual de usuario

Sungrow

Sungrow SG350HX-US Manual de usuario

WilTec

WilTec 61897 Manual de usuario

SMA

SMA SUNNY BOY STORAGE 2.5 Manual de usuario

Simplicity

Simplicity LANDLORD 316 Manual de usuario

Santak

Santak SMAX 3000 Manual de usuario

ATON

ATON RA.Store-3 Manual de usuario

ZIEHL-ABEGG

ZIEHL-ABEGG FXET4AMQ Manual de usuario

Tektronix

Tektronix CFG250 Manual de usuario

Champion

Champion 200989 Manual de usuario

Vanner

Vanner 20-500 Series Manual de usuario

GE

GE GEP Manual de usuario

Astrel Group

Astrel Group Power Reducer Guía rápida

MULTIQUIP

MULTIQUIP GDP-5H Guía

GoWISE

GoWISE PS1007 Manual de usuario

Promate

Promate PM13500D ES Manual de usuario

Mastervolt

Mastervolt WHISPER 3.5M3000 RPM Manual de usuario