Gofanco Matrix44HD2-LT Manual de usuario

4x4 HDMI 2.0 Matrix LT

User's Guide

G4-0115A

P/N:Matrix44HD2-LT

Thank you for purchasing from gofanco. Our products

aim to meet all your connectivity needs wherever you

go. For optimum performance and safety, please read

the instructions carefully and keep this User's Guide for

future reference. If you need more information about

our products, please visit www.gofanco.com. For

technical support, email us at [email protected].

For drivers or manual download, please go to

www.gofanco.com/downloads.

Important Safety Notices

Pleasereadsafetyinstructionscarefullybeforeinstallation

and operation.

• Please pay close attention to all warnings and hints

for this device

• Do not expose this unit to rain, heavy moisture, or

liquid

• Do not put any items into the device or attempt to

modify its operation

• Do not repair the device or open the enclosure

without professional guidance to avoid electric

shocks. Doing so may void your warranty

• Keep the product in a well-ventilated location to

avoid damage from overheating

• Shut off power and make sure environment is safe

before installation

• Do not plug the HDMI cables in/out when the

device is in use to avoid cable damage. Make sure

they are plugged into the correct ports

• Use the included 12VDC power adapter only. Make

sure the specification matches if using 3rd-party

DC power adapters

Introduction

The 4x4 HDMI 2.0 Matrix LT allows you to connect up to

four HDMI source devices and independently switch

any source to any of the four HDMI displays.

Features

• Supports up to 4K@60Hz YUV 4:4:4 8-bit, HDR (at

4K@60Hz YUV 4:2:0 10-bit), HDMI 2.0, HDCP 2.2/

1.4, 18Gbps

• SupportsHDdigitalaudio, LPCM 7.1, 24-bit, 96KHz,

Dolby Atmos

• 4K to 1080p auto downscaling to support mixed 4K

& 1080p outputs

• Control methods: Panel buttons, IR remote

• EDID management: Built-in EDID, EDID copy

• Firmware upgradable for expanded capability and

compatibility

Installation Requirements

• HDMI source devices (DVD player, set top box, PC,

etc.)

• HDMI displays (SDTV/Monitor, HDTV/Monitor,

projector, etc.)

• HDMI cables (not included)

PackageContents

• 4x4 HDMI 2.0 Matrix LT

• IR remote control

• Mounting accessories

• Power adapter, 12VDC/2A

• User's guide

Product Layout

Figure 1: Front Panel Layout

1. Micro USB Port: For firmware update

2. IR In: Receives IR signals from the included remote

control

3. Input LED: HDMI Input indicator for HDMI Out 1/

2/3/4 or EDID indicator for HDMI In 1/2/3/4

4. HDMI Out 1 Select Button: Press to select the

HDMI input device to display on HDMI Out 1

5. HDMI Out 2 Select Button: Press to select the

HDMI input device to display on HDMI Out 2

6. HDMI Out 3 Select Button: Press to select the

HDMI input device to display on HDMI Out 3

7. HDMI Out 4 Select Button: Press to select the

HDMI input device to display on HDMI Out 4

Select Button Functions

Select Button Operation Function

HDMI Out 1-4 Short press

1. Selects the HDMI Input device for

HDMI Out 1-4

2. Selects the EDID for HDMI Out 1-

4 when EDID management mode is

enabled

HDMI Out 1-4 Long press Enter/Exit EDID management mode

HDMI Out 1 + HDMI

Out 4

Long press

simultaneously Reset the Matrix to default settings

Figure 2: Rear Panel Layout

1. HDMI In (1-4): Connect to your HDMI sources

2. HDMI Out (1-4): Connect to your HDMI displays

3. PowerJack:Connects to theincludedpower adapter

Hardware Installation

1. Power off all devices including your HDMI

source(s) and HDMI display(s).

2. Connect your HDMI source devices to the Matrix's

HDMI In connectors with HDMI cables (HDMI

cables not included).

3. ConnectyourHDMIdisplays to the Matrix'sHDMI

Out connectors with HDMI cables (HDMI cables

not included).

4. Plug the included power adapter into the Matrix's

Power Jack, then plug the power adapter into a

reliable power outlet.

5. Power on all connected devices. The Matrix is

ready for use.

Application Diagram

The application diagram shows the most typical input

and output devices used with the 4x4 HDMI 2.0

Matrix LT.

Figure 3: Application Diagram

Matrix Device Control

Remote Control

Users can control the 4x4 HDMI 2.0 Matrix LT using the

included IR remote. Point the remote control towards the

Matrix's IR In window located on the front panel.

1. Standby: Press to place the Matrix into standby

mode. Press again to wake up the Matrix

2. Mute: Turns audio On/Off. Choose the output

first, then press M. Example: To mute output 1 -

press Output 1 button (see #4), then press M

3. Lock: Press to lock the remote control

4. Output 1/2/3/4: Selects an input source to display

on an output port. Example: To select Input 1

source to display on Output 1 port - Press Output

1 button, then press Input 1 button (see #8)

5. All:Selectsoneinputdevice to display on alloutputs.

Example: Press All button, then press Input 1/2/3/

4 (see # 8)

6. PTP (Port to Port): Press to assign all inputs and

outputs to their numerical counterparts. Examples:

Input 1 to Output 1, Input 2 to Output 2, Input 3 to

Output 3, Input 4 to Output 4

7. X: Turn off output port. Example: To turn off

display on Output 1 - Press Output 1 button (see

#4), then press X. To turn on the display, press

Output 1 + X again

8. Input Select: Press to select input 1/2/3/4

9. Next: Switch to the next input device. Example: To

switch Output 1 to the next input device - Press

Output 1 button (see #4), then press >. Note: If the

next input device is inactive it will automatically

skip to the next active input device

10. Last: Switch to the previous input device. Example:

To switch Output 1 to the previous input device -

Press Output 1 button (see #4), then press <. Note:

If the previous input device is inactive it will

automatically skip to the next active input device

Note: Allbuttons support shortpress, long press function

is not supported.

EDID Management

Allows you to choose the EDID for each input.

Supports built-in and EDID copy modes.

There are 8 EDID groups.

EDID Table

EDID Configuration Mode Setup

The Matrix's default EDID is 4K@60Hz YUV 4:4:4 8-bit 2-

ch (0,0,0,1). Do Not make any changes if the default EDID

works properly.

1. To change the EDID for Input 1, long press the

HDMI Out 1 Select button (on the Matrix's front

panel) for 1 second to enter EDID configuration

mode. Release the button when the HDMI Out 1

LED begin to flicker. Example: If only Input 1 LED

is flickering, it represents EDID Def1: 4K60Hz YUV

4:4:4 8-bit 2Ch (see Indicator status in EDID table on

page 9).

2. Quickpressthe HDMI Out 1 Select button to choose

the EDID setting (see Indicator status in EDID table

onpage9).Example: If only Input2LEDis flickering,

it represents EDID Def2: 4K60Hz YUV 4:2:0 8-bit

2Ch.Note: EDID switching sequence: Built-inEDID

> Copy EDID.

Specifications

HDMI Compliance HDMI 2.0

HDCP Compliance HDCP 2.2/1.4

Resolution

480p@60Hz, 576p@50Hz, 720p@60Hz,

1080p@24/50/60Hz, 4K@24/30Hz,

4K@60Hz YUV 4:2:0, 4K@60Hz YUV 4:4:4

Bandwidth 18Gbps

Input Video Signal 0.5 - 1.0 volts p-p

Input DDC signal 5 volts p-p (TTL)

Video Compatibility HDR10, HDR, Dolby Vision

Deep Color 8bit, 10bit, 12bit

Audio Output LPCM 7.1/24bit/ 96khz, Dolby Atmos,

DTS-X

Power Consumption 12.3W (max)

Operating Temperature 0 - 40 C (32 to 104 F)

Operating Humidity 5 to 90% RH (no condensation)

3. Long press the HDMI Out 1 Select button for about

1 second or wait 10 seconds to save your changes

and exit EDID mode.

4. Repeat steps 1-3 for each HDMI input if necessary.

Tabla de contenidos

Otros manuales de Cambiar de gofanco

gofanco

gofanco USBCMST2DP Manual de usuario

gofanco

gofanco Prophecy PRO-KVMaud4P Manual de usuario

gofanco

gofanco SwitchBYOD41 Manual de usuario

gofanco

gofanco KVMHD2-4P Manual de usuario

gofanco

gofanco HDRswitch4P-Aud Manual de usuario

gofanco

gofanco EthSwitch24P Manual de usuario

gofanco

gofanco Switch41-HD20 Manual de usuario

gofanco

gofanco Switcher3P Manual de usuario

gofanco

gofanco USBCMST2HD-4K60 Manual de usuario

gofanco

gofanco EthSwitch24P-2 Manual de usuario

gofanco

gofanco KVMScaler2P Manual de usuario

gofanco

gofanco DPMST2DP Manual de usuario

gofanco

gofanco KVMDP-2P Manual de usuario

gofanco

gofanco PRO-QuadView Manual de usuario

gofanco

gofanco Matrix88HD20-Pro Manual de usuario

gofanco

gofanco Switcher5p Manual de usuario

gofanco

gofanco mDPMST2DP Manual de usuario

gofanco

gofanco HDRswitch5P Manual de usuario

gofanco

gofanco USBCMST3VID Manual de usuario

gofanco

gofanco KVMHD2-2P Manual de usuario

gofanco

gofanco HDRswitch3P Manual de usuario

gofanco

gofanco Switch3P-HD20 Manual de usuario

gofanco

gofanco Prophecy PRO-KVMDP-4P Manual de usuario

gofanco

gofanco DP14MST2HD Manual de usuario

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario

gofanco Matrix44HD2-LT Manual de usuario

Manuales populares de Cambiar de otras marcas