Godex EZ-2200 Manual de operación y mantenimiento

P/N. 920-011212-02

Edition 2

AUG.14

EZ-2200/EZ-2300 Programmer’s Manual

EZ-2200/EZ-2300 PROGRAMMER’S MANUAL............0

1. COMMANDS ......................................................................................2

1-1. EZPL................................................................................................2

1-2. LanguageDescription.......................................................................3

1-3. Barcode..........................................................................................13

2. EXAMPLES ...................................................................................14

APPENDIX...........................................................................................21

A. Barcode Details...................................................................................21

1. Commands

1-1. EZPL

The EZPL (EZ Programming Language) is a high-level label definition and printer control language.

The features are:

1. The data fields are stored and processed until the printing instruction is received.

2. All the data can be rotated.

3. Images can be downloaded and stored.

There are three basic types ofcommands:

• Setup

• Control

• Label format

Setup commands

Contain the printer control instructions, configuration instructions and image downloading instructions.

Description Command Page

Printing mode ^Ax 3

Stop position setting ^Ex 3

Setting Print darkness ^Hx 3

Number ofpages printed ^Px 4

Label length ^Qx,y(,z±) 4

Speed setting ^Sx 4

Number ofcopies per label ^Cx 4

Rowcolumn adjustment ^Rx 4

Label format begin sign ^L4

10.

Stripper sensor ^Ox 5

11.

Download label format ^Fname5

12.

Recall label format ^Kname5

13.

Label width setting ^Wxx 5

14.

Number oflabels per cut ^Dx 5

15.

Serial Port translation setting ^Yp1.p2,p3,p4 5

16.

Set the forward length ^Mx 6

17.

Set the backward length ^Bx 6

Control commands

Cause the printer to take action immediately, such as cleaning memory, feeding label.

Description Command Page

Graphic download memory~Ea, name, length 6

Bit-Mapped font download ~Jn 6

Graphic mode ~G 6

Print last label ~Px 6

Print version message ~V 6

Date / Time setting ~Dm,d,y,h,I,s 6

Reset printer ~Z 7

Printer head testing ~T7

Clear all ~MDEL 7

10.

Clear memory ~MDELx,name7

11.

Rotate printing ~Rx 7

12.

Print the available space and data name in the memory

~Xn 7

13.

Acknowledge formRS-232 ~Kn 7

14.

RowOffset Adjustment ~Q±n7

Label formatting commands

Define field data, such as Line, Rectangle, Barcode, Text and image.

Description Command Page

Define date layout Daa|bb|cc 8

Serial number setting Cx,ys,±value,prompt 8

Terminate label formatting mode and print label

Graphic command Gwxxx 8

Line command La,x, y, x1, y19

Rectangle Rx, y, x1,y1, lrw, ubw9

Table Hx,y,row_count,col_count,row_width,col_width,line_wi

dth

Define time layout formatting Th|m|s9

Graphics Yx, y, name9

10.

Text At, x, y, x_mul, y_mul, gap, rotation, data 10

11.

Barcode Bt,x,y,narrow,wide,height,rotation,readable,data 10

12.

PDG 417 Px,y,w,h,r,c,ec,len 11

13.

Maxicode

Mx, y,sno, nos, mode, ccode, zip, class, rotation,

message 11

14.

DataMatrix Code Xp1, p2, p3, data 11

15.

Define variable field Vxx, length, prompt 11

16.

Pattern command Qx, y, width, height 12

17.

Downloading character sets to memoryVt, x, y, x_mul, y_mul, gap, rotation, data 12

1-2. Language Description

Rules and syntax

EZPL commands have parameter strings associated with them;

• The commands begin with a letter as ID for each function.

• The comma (,) is the delimiter to separate each parameter.

• The CR [Carriage Return: decimal (13), hex (oD) signifies the end ofeverycommand.

• Control and Setup commands use the tilde (~) and caret (^) prefix.

• Label Formatting commands have no prefix.

Example: “~Ea,name,length “. ”E”is an image download command, and (a,name,length) are three parameters.

Setup commands

1. Printing mode

Syntax :

^Ax

Parameter :

x = D or T

Description :

x = D , Direct thermal mode

x = T, Thermal transfer mode

2. Stop position setting

Syntax :

^Ex

Parameter :

X = 0~40 (unit : mm)

Description :

Feed paper to desired stop position.

3. Setting Print darkness

Syntax :

^Hx

Parameter :

X = 00 ~ 19

Description :

Set printing darkness.

4. Number ofpages printed

Syntax :

^Px

Parameter :

x = 1 ~ 32767

Description :

Set howmanylabels to print; and it will initiate the program.

5. Label length

Syntax :

^Qx,y(,z±)

Die cut label (See fig. 1)

x = Label length (unit : mm)

y= Gap length (mm)

Parameter :

EX.

^Q25,3

(x=25,y=3) mm

paper feed

direction

Plain paper:

x = Label length (unit : mm)

y= 0 (constant)

z= Feed paper length (unit : mm)

Blackmarklabel:

x = Label length (unit : mm)

y= Blackmarkwidth (mm)

z= Blackline to top offormposition.

z+ : When the position is outside the blackmark.

z- : When the position is within the blackmark.

EX.

^Q25,4,3+

(x=25, y=4, z=3+) mm

^Q25,4,3-

(x=25, y=4, z=3-) mm

Description :

Set label size (length, gap length, [plain paper feed length])

6. Speed setting

Syntax :

^Sx

Parameter :

x=1 to 6 (inch/sec)

Description :

Set printing speed

7. Number ofcopies per label

Syntax :

^Cx

Parameter :

X = 0 ~ 32767

Description :

Number ofcopies ofthe same label.

8. Rowcolumn adjustment

Syntax :

^Rx

Parameter :

x = 0 ~ 399 dots

Response :

None

Description :

Set left margin

9. Label format begin sign

Syntax :

Parameter :

None

Descripton :

Set label begin sign

10.Stripper sensor

Syntax :

^Ox

Parameter :

x = 0 , stripper disable.

x = 1 , stripper enable

Description :

Enable or disable the stripper sensor. When you use this command, it should be matched

with^Ex. (refer page 17)

11.Download label format

Syntax :

^Fname

data

Parameter :

Name = name oflabel format (up to 20 characters)

Data = the data containing the label formatting command for this stored format

Description :

Download label format into memory. After the download is finished, the printer will beep once

(refer page 20).

^Fname

Control/Setup command

Label format command

data

Same name inspection : Ifyou use the same file name, the printer will print ”REPEATFILE

NAME”, and the download will be not be accepted.

12.Recall label format

Syntax :

^Kname

Parameter :

Name = name ofrecall label format (up tp 20 characters)

Description :

Recall label format fromexternal format (refer page 20)

^Kname

~Px

data

Control/Setup command [option]

13.Label width setting

Syntax :

^Wxx

Parameter :

x=label width (mm)

Description :

Label width setting

14.Number oflabels per cut

Syntax :

^Dx

Parameter :

X = 0 , disable cutting.

X = 1 ~ 32767 , number oflabel per cut.

Description :

Number oflabels per cut (refer page 17)

15.Serial Port translation setting

Syntax :

^Yp1.p2,p3,p4

Parameter :

p1 : Baud Rate (48 or 96 or 19 or 38) ; 48=4800bps; 96=9600bps; 19=19200bps;

38=38400bps

p2 : Parity(N, O, E) ; N=none parity; O=odd parity; E=even parity

p3 : Number ofdata bits (7 or 8)

p4 : Number ofstop bits (1 or 2)

Description :

Serial Port translation setting

16.Set the forward length

Syntax :

^Mx

Parameter :

x = forward length (mm)

Description :

Set the forward length ofthe paper

17.Set the backward length

Syntax :

^Bx

Parameter :

x = backward length (mm)

Description :

Set the backward length ofthe paper

CONTROL COMMAND

1. Graphic download memory

Syntax :

~Ea, name, length

Parameters :

a = P or p : PCX file

a = B or b : BMP file

name : Name ofimage (up to 20 character)

length : Length ofimage (bytes), maximum512K byte.

Description :

Download monochrome image onto memory. Printer will beep 1 time after completely

downloaded. Ifyou use the same file name, the printer will show”REPEATFILE NAME”, and

the download will be not be accepted (refer page 19).

2. Bit-Mapped font download

Syntax :

~Jn

Parameters :

n = character; Froma ~ zor A ~ Z; at least up to 26 characters.

Description :

The command used for font loading is usuallygenerated byQlabel-III label creation

software. The printer will beep once after downloaded. Ifyou use the same file name, the

printer will show”REPEATFILE NAME”, and the download will be not being accepted. The

downloaded font are compatible with the HP Laser Jet II Plus (PCL-4).

Download the “HVR0OE1A.SFP”text file to external memorycard. Use “A”to do the

character code name.

Example :

~JA ; Define A as HVR0OE1A.SFP

COPYHVR0OE1A.SFP PRN/B ; Send the order with the DOS mode

3. Graphic mode

Syntax :

Parameter :

None

Decription :

Printer is in the image-receiving mode. Image data is directlysent fromhost to the printing

buffer (refer page 18)

4. Print last label

Syntax :

~Px

Parameter :

x = 1 ~ 32767

Description :

This command will repeatedlyprint the indicated copies ofthe last label format.

5. Print version message

Syntax :

Parameter :

None

Description :

Print firmware version.

6. Date/Time setting

Syntax :

~Dm,d,y,h,I,s

Parameter :

m= Month (01 to 12)

d = Date (01 to 31)

y= Year (last two digits ofyear)

h = Hour (00 to 23)

i = Minutes (00 to 59)

s = Seconds (00 to 59)

Description :

Set real time clock.

7. Reset printer

Syntax :

Parameter :

None

Description :

Reset the printer, the LED will flash once.

8. Printer head testing

Syntax :

Parameter :

None

Description :

Print a pattern for the user to determine ifthe print head is damaged (refer page 20)

9. Clear all

Syntax :

~MDEL

Parameter :

none

Description :

Clear all in the memory(not include Asia font)

10.Clear memory

Syntax :

~MDELx,name

Parameter :

x = type

G, graphic

F, label form

E, Bit-Mapped font (not included Asia font)

name: The name ofthe graphic, formand Bit-Mapped font

Description :

Able to delete individual files or erase entire flash memory.

Example :

~MDELG,Bus ; the graphic “Bus”will be deleted

11.Rotate printing

Syntax :

~Rx

Parameter :

x = label width; from1 to 104 (mm)

Description :

Rotate the label format 180-degrees when printing (refer page 19). To return to the original

print direction, set the x value greater than 104 (ie. ~R105).

12..Print the available space and data name in the memory

Syntax :

~Xn

Parameter :

n = 1, print label format names and available space in memory.

n = 2, print graphic names and available space in memory.

n = 3, print Bit-Mapped font names and available space in memory.

n = 4, print the name ofthe label formats, graphics, fonts, and available space in memory.

n = 5, print Asia font names and available space in memory

n = 6, displaythe total printed length on the LCD

Description :

Print the available space in the memorycard (unit: bytes)

13.Acknowledge fromRS-232

Syntax :

~Kn

Pararmeter :

n = 0, disable.

n = 1, enable.

Return value :

Description :

Acknowledge a “Y(0D0A)”fromRS-232 backto host each printing label.

14.RowOffset Adjustment

Syntax :

~Q±n

Pararmeter :

n=-36 ~ +36

Return value :

none

Description :

Ifthe printing doed not appear in the same place on everylabel, this command instructs the

printer to print label formats +n increments above the position the format specifies, and –n

decrements belowthe position the format specifies.

Label formatting commands

1. Define date layout

Syntax :

Daa|bb|cc

Parameter :

aa = Year

y2 : Year with two digits (such as 97)

y4 : Year with four digits ( such as 1997)

bb = Month

me : Month in letters (JAN, FEB, .... )

mn : Month in numeric (01, 02, .... )

cc = 2 digits day

|= Separator, can be anyASCII character between decimal 32 to 63.

Description :

Define the date layout for print out (refer page 15)

2. Serial number setting

Syntax :

Cx,ys,±value,prompt

Parameter :

x: 0 to 9(up to10group), maximumcombination up to 3 groups.

y: select the decimal

y= none, Decimal (0~9)

y= A, Hexadecimal (0~9,A~F)

y= C, 0~9, A~Z

s: start value ofserial variable (up to 13-digit)

±value: inc. / dec. value ofserial variable (up to 12-digit)

prompt: prompt ofserial variable (up to 20 characters)

Description :

Set the serial number (refer page 18)

Example :

^Q50,0,0

^W100

^S6

^H10

^E12

^P5

C0,000,+1,AA

C1,AEE,+1,BB

C2,CZYY,+1,CC

AC,5,5,1,1,1,0,^C0^C1^C2

Printing result:

000EEZYY

001EFZYZ

002F0ZZ0

003F1ZZ1

004F2ZZ2

3. Terminate label formatting mode and print label

Syntax :

Parameter :

None

Description :

End offormatting command; printer will print label after receiving this command.

4. Graphic command

Syntax :

Gwxxx

Parameter :

wxxx...

w: byte number ofimage data (xxx...)

Description :

This command is a sub-command of~G It is sent bybinarydata. Wis the digits number byte of

image data (refer page 18). For example, ifthe image file is 50 bytes, the command is G2xxx . (2:

ASCII is 50 decimal)

5. Line command

Syntax :

La,x, y, x1, y1

Parameter :

a = o, overwrite line

a = e, exclusive or line

x : left-up; per horizontal(Hori.) pos. (dot; 1mm=

8dots)

y: left-upper vertical (Vert.) pos. (dots)

x1: right-bottomHori. Pos. (dots)

y1: right-bottomVert. Pos. (dots)

Description :

Define a line to render in the label (refer page 16)

** The diagonal line drawis not available **

6. Rectangle

Syntax :

Rx, y, x1,y1, lrw, ubw

Parameter :

x : left-upper Hori .pos. (dots)

y: left-upper Vert. Pos. (dots)

x1 : right-bottomHori. Pos. (dots)

y1 : right-bottomVert. Pos. (dots)

lrw: thickness ofleft, right border (dots)

ubw: thickness ofupper bottomborder

(dots)

(x,y)

lrm

ubw

(x1,y1)

Description :

Drawa rectangle in the label (refer page 16)

7. Table

Syntax :

Hx,y,row_count,col_count,row_width,col_width,line_width

Parameter :

x : left-upper Hori .pos. (dots)

y: left-upper Vert. Pos. (dots)

row_count : numbe ofrows

col_count : number ofcolumns

row_width : rowwidth

col_width : column width

line_width : line width

Description :

Drawa table in the label.

Example :

H20,20,2,3,30,20,10

8. Define time layout formatting

Syntax :

Th|m|s

Parameter :

h = Hour format ( 2 digits, 00 ~ 23)

m= Minute format ( 2 digits, 00 ~ 59)

s = Second format (2 digits, 00 ~ 59)

|= Separator (It can be anyseparator between dec. 32 to 63 ofASCII).

Descripton :

Define the time layout for internal real-time clock(refer page 15)

9. Graphics

Syntax :

Yx, y, name

Parameter :

x : Hori. Pos. ofleft-upper ofgraphics (dots)

y: Vert. Pos. ofleft-upper ofgraphics (dots)

name : Name ofgraphics download

Description :

This command is print a graphic that has been previouslystored in printer memory(refer page

19)

Example:

A graphic in printer named “Graphic1”,

command Y20,40,Graphic1 ↵will put

this graphic into label at position

(20,40).

(20,40)

Otros manuales para EZ-2200

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Impresora de Godex

Godex

Godex EZ-2000 PLUS Manual de usuario

Godex

Godex EZ-1200 Manual de usuario

Godex

Godex EZ-2000 PLUS Manual de operación y mantenimiento

Godex

Godex EZ225i Manual de usuario

Godex

Godex C-650Plus II Manual de usuario

Godex

Godex EZ-2000 PLUS Manual de usuario

Godex

Godex GE300 Manual de usuario

Godex

Godex EZ-DT-2 Manual de usuario

Godex

Godex EZ-4TKP Manual de usuario

Godex

Godex RT200i Manual de usuario

Godex

Godex EZ-2P Manual de usuario

Godex

Godex EZ-4206 Manual de operación y mantenimiento

Godex

Godex RT860i Manual de usuario

Godex

Godex C-680 FlatJet Manual

Godex

Godex EZ-1000 Plus Manual de operación y mantenimiento

Godex

Godex AG2000 Manual de usuario

Godex

Godex EZ-1000 Plus Manual de usuario

Godex

Godex HD830i Manual de usuario

Godex

Godex EZ-DT-2 Manual de usuario

Godex

Godex AG4000T Manual de usuario

Godex

Godex EZ-4206 Manual de usuario

Godex

Godex EZ-1105P series Manual de usuario

Godex

Godex MX20 Manual de usuario

Godex

Godex EZPi-1200 Manual de usuario

Manuales populares de Impresora de otras marcas

Lexmark

Lexmark 1400 Series Manual

Canon

Canon i70 Series Manual de usuario

Evolis

Evolis Elypso Manual de usuario

Kyocera

Kyocera FS-9530DN Manual de usuario

Canon

Canon LASER SHOT LBP-1210 Manual de usuario

Samsung

Samsung BIXOLON SRP-350plusF Manual de usuario

Canon

Canon PIXMA PRO-1 Series Manual de usuario

Canon

Canon PIXMA G3560 Guía de configuración

Dell

Dell Color Laser Printer 2130cn Manual de usuario

Tektronix

Tektronix Phaser 840 Manual de usuario

Epson

Epson ET-7750 Instrucciones de funcionamiento

Canon

Canon CLBR 460ps Manual de usuario

Eltron

Eltron P210 Guide Manual de usuario

Ricoh

Ricoh MD-P1 Manual de usuario

Epson

Epson SC-F7100 series Manual de usuario

Epson

Epson Stylus C40UX Manual de usuario

Canon

Canon imagePASS-A2 Manual de usuario

Canon

Canon S820D Manual de usuario