GLD Viper 777 Manual de usuario
GLD Products 777 Electronic Dartboard
Item 42-0000
Item 42-0000
January 2012 UPC Code 7-19265-51777-1
Viper 777
ELECTRONIC DARTBOARD
Replacement Parts
Order direct at www.gldproducts.com
or call our Customer Service department at
(800) 225-7593 ext. 113
8 am to 4:30 pm Central Standard Time
4 X AA
GAME OPTIONS #OF PLAYERS
ON/OFF BOUNCE OUT START
ELIMINATE
DART SCORE
PLAYER
CHANGE
VOLUME INOUT 15 16 17 18 19 20 B
CRICKET
GAME
OPTION
PLAYER SCORE
P
L
A
Y
E
R
GLD Products 777 Electronic Dartboard
Item 42-0000
Staple your receipt here.
Important: A copy of your receipt will be needed to activate your warranty (see page 27).
GLD Products 777 Electronic Dartboard
Item 42-0000
3 1-800-225-7593
www.gldproducts.com
Congratulations and THANK YOU for purchasing the
777 Electronic Dartboard You have chosen a product
that should provide years of entertainment. To assist
you with customer service and warranty claims,
staple your receipt to the inside cover, then keep this
manual in a safe place for future reference.
GLD Products
S84 W19093 Enterprise Drive
Muskego, WI 53150 USA
1-800-225-7593 ext 113
Fax: 1-800-841-6944
Email: gld@gldmfg.com
Web: www.gldproducts. com
This manual may have been updated. For the latest manual visit the GLD products website.
Place your package near the location where it will be used. Carefully unpack
all components and verify you have all the correct pieces.
If you notice missing or defective parts, please call us at:
1-800-225-7593 ext. 113
Please read and understand all instructions before beginning assembly.
This assembly will require 2 adults.
This product is not for use by children without adult supervision.
GLD Products 777 Electronic Dartboard
Item 42-0000
1-800-225-7593 4
www.gldproducts.com
GLD Products 777 Electronic Dartboard
Item 42-0000
3957-522-008-15
www.gldproducts.com
IF YOU HAVE A WARRANTY CLAIM, CALL US FIRST
Please see page 27.
GLD Products
Available 8 am to 4:30 pm Central Standard Time
S84 W19093 Enterprise Drive
Muskego, WI 53150 USA
1-800-225-7593 ext. 113
Fax: 1-800-841-6944
Email: gld@gldmfg.com
Web: www.gldproducts.com
For all claims, please have your receipt and item number when you call. The
product item number can be found on the back of the dartboard.
If you are instructed to return the product for service, you are
responsible for shipping the unit at your expense.
PRODUCT REGISTRATION
Important: The product registration form on page 29 and a copy of your
receipt must be completed and returned within 10 days of purchase to
validate your warranty.
GLD Products 777 Electronic Dartboard
Item 42-0000
1-800-225-7593 6
www.gldproducts.com
EASY ASSEMBLY INSTRUCTIONS & RULES
Thank you for purchasing the GLD Products 777 Electronic Dartboard. Its computerized
scoring system makes game playing easy and enjoyable. With 26 games and 113 options to
choose from, beginners and more advanced players will find challenging games to suit
them.
Features also include:
• 8 player electronic dart games
• Team play
• Ultra thin spider
Included in box:
• Dartboard
• Mounting hardware
• 2 sets of darts with extra tips
NOTE: Additional parts can be ordered. See the order form in the back of this manual.
WARNING: Parents - Please read instructions carefully. Not
for use by children without adult supervision.
TOOLS REQUIRED
• Phillips head screwdriver or electric screwdriver
•Level
• Mounting hardware (provided)
• Tape measure
• Nail or marker
UNPACKING THE GAME
After unpacking the game, it is important to save the original box, all packing material, and
the receipt. These items will be needed if it ever proves necessary to return the game for
service.
When requesting service use the item number that is located on the back of the dartboard.
GLD Products 777 Electronic Dartboard
Item 42-0000
7 1-800-225-7593
www.gldproducts.com
MOUNTING (PHYSICAL INSTALLATION)
Center of Board
Wall
Throwing or
Toe LIne
Plumb Line from
Face of Board to Floor
Floor
96 in.
68 in.
12.5"
6.25" 6.25"
6.25"
6.25"
8.5"
8.75"
17.25"
68"
To Floo
r
Bullseye
Keyhole Slots
GLD Products 777 Electronic Dartboard
Item 42-0000
1-800-225-7593 8
www.gldproducts.com
Two methods for mounting the dartboard are available.
1. Use the two keyhole slots and mount the center of the dartboard following the illustration.
The two screws are screwed into the wall until the screw head is 3/8" away from the wall.
The dartboard is positioned so the two screw heads are inside the keyhole. Slide the
dartboard down to secure. The head of the screw that is used must be larger than 5/16"
and smaller than 3/8".
2. Four equally spaced holes are accessible from the front to drive in screws. With the
dartboard held in place, four screws are driven in from the front, through the existing
holes. Use 1/8" diameter screws. The head of the screw must fit inside the pocket.
Wall Anchors
A wall with studs is the most common type of wall to mount the dartboard.
1. Locate a stud and use wood screws or sheet metal type screws to secure the dartboard.
2. If a stud cannot be located or is not in the proper location, use an anchor that is suitable
for the type of wall.
Some common anchors are:
Plastic - Drill a snug hole in drywall and push the anchor in up
to the head. When the screw is screwed into the anchor, the
plastic will expand, locking the anchor in place. Do not use on
thin panelling.
Toggle Bolt - Drill hole through wall. Hole must be large
enough for the wings to pass through. Insert screw through the
holes in the dartboard and thread the toggle wings just onto
the screw. Fold the wings back and push through the hole until
the wings spring open. Pull back on the screw to hold wings
against the inside of the wall and tighten screw.
Hollow wall anchor - Drill a snug hole through the wall. Tap
anchor into the hole until the prongs on the underside of the
head are seated securely into the wall. Turn screw in and
apply pressure to keep the anchor head from turning. Tighten
screw until resistance is felt. Do not over tighten. Turn screw
out to remove. Anchor will stay and screw can be replaced.
Other methods are available. Consult a hardware store if questions arise.
Mounting Using the Four Holes From the Front
1. Choose a location that is near an electrical outlet (if using power adapter) and has at
least 10 feet of open floor space in front of the board. Use a wall stud for mounting when-
ever possible.
GLD Products 777 Electronic Dartboard
Item 42-0000
9 1-800-225-7593
www.gldproducts.com
2. Two people are needed for this step. Hold board on the wall. Position center of bullseye
68" from the floor. Level the board. Hold in place.
3. Locate the four mounting holes on the front of the board. Use a marker or nail to mark the
position of the board through the four mounting holes onto the wall. Remove the board.
4. Drill four pilot holes on the marks created in Step 3.
5. If using plastic anchors: drill the holes so the anchors fit snugly. Push anchors into place.
6. Line up dartboard over anchors. Screw board into place. The screws will expand the
anchors.
7. Place a toe line 96" from the face of the board for the throwing distance. Adhesive tape
or masking tape, 2' long by 2-1/2" wide, may be used.
8. After the board is mounted, the bullseye should be 68" (173 cm) above the floor.
Mounting Using the Keyhole Slots
1. Determine the location for the dartboard. Place a mark on the wall 68 inches (172.7 cm)
from the floor. This mark is the final position of the center of the dartboard (bullseye).
2. Locate studs and use wood screws or sheet metal screws to secure the dartboard if the
bullseye mark is on the stud. The head of the screw must be larger than 5/16" and
smaller than 3/8".
3. If the mark is not over a stud, use the mounting hardware that came with your dartboard.
4. Measure 8-3/4" (22.2 cm) directly up from the bullseye mark and place a mark on the
wall.Then measure down 8-1/2" (21.6 cm) from the bullseye mark and place a mark on
the wall. Use a level to check that all three marks are vertical.
5. Drill pilot holes on the top and bottom marks. These are for the mounting screws.
6. If using wall anchors, follow the instructions under
Wall Anchors
on page 8.
7. Insert screws into anchors until a 1/4" (6.5 mm) gap is left between the wall and the
screw head.
8. Hold the dartboard so the two screw heads fit into the lower part of the keyhole. The
dartboard should slide down 1/2 inch and the screw heads will hold it on the wall.
9. Screws can be tightened or loosened to provide a secure mounting.
GLD Products777 Electronic Dartboard
Item 42-0000
013957-522-008-1
www.gldproducts.com
POWER INSTALLATION
The dartboard is powered by 4 AA batteries. The battery compartment can be opened from
the front to install the 4 alkaline AA batteries. To conserve batteries, this dartboardis
equipped with a sleep mode and an auto power-off mode. If the dartboard is not being used,
it will automatically entersleep mode after3 minutes and will turn off after 30 minutes.
The dartboard can also be powered by an external power supply. The power supply must be
120V, 60 Hz, 12 w input with 300 mA, 9 VDC output. The round plug for the dartboard has a
negative outside and a positive center. Remove the batteries and plug the power supply into
the jack on the side of the dartboard.
PROTECTIVE FILM
This electronic dartboard has a clear protective film over the entire display and button area
to prevent scratching during shipping. It is recommended that you remove this film for easier
reading of the display. To remove, simply lift edge, peel off and discard.
WARNING:Not for use by children without adult supervision.
Darts are not toys and may cause injury if used
improperly. Everyone must stand behind the dart
shooter.
Tabla de contenidos
Manuales populares de Juego de otras marcas
Koala Technologies
Koala Technologies KoalaWare Spider Eater Manual de usuario
Tomy
Tomy The Magic Oven Manual de usuario
Sega
Sega GAME SHOW Manual de usuario
Tiger Electronics
Tiger Electronics Last Out 7-584-0 Manual de usuario
Fisher-Price
Fisher-Price RollOverRover Manual de usuario
Mattel
Mattel World Championship Football Manual de usuario