Vex Add It Up Manual de usuario

This document will provide detailed specifications, a bill of materials (BOM), and assembly

instructions for the Official Competition Field.

Please note that this field utilizes the VEX IQ Challenge Field Tiles & Perimeter kit (228-2550)

developed by VEX Robotics. Instructions and specifications for this field perimeter are available

in a separate document, and are also important for field assembly.

This document is divided up into four sections:

1. Field Overview

2. Field Bill of Materials

3. Field Specifications

4. Field Assembly Instructions

There is also an accompanying STEP file which can be imported into most 3D modeling

programs (i.e. Autodesk Inventor). This 3D model not only shows the “official” setup of a VEX

Add It Up Competition field, but also includes detailed models of all the individual field elements.

For additional game-play detail, please refer to the VEX Add it Up competition manual.

The game VEX Add It Up is played on a 4 ft x 8 ft playing field, surrounded by 2-1/2” walls. The

playing field floor tiles and walls are modular plastic tiles from the VEX IQ Challenge Field Tiles

& Perimeter kit (228-2550) with integrated mounting holes for VEX IQ structural elements. The

field is divided in half by a center structure consisting of four elevated scoring Goals and a

horizontal Hanging Bar. Spread around the field are (36x) Small BuckyBalls, (4x) Large

BuckyBalls, and (4x) Scoring Rings, for robots to manipulate and score. For more details and

specific game-play rules, please refer to the VEX Add It Up manual.

Note: The center of the balls and rings are aligned using the edges of the floor tiles and/or the rows of the mounting

pin holes as a reference guide.

There are two options available for the official VEX IQ Challenge playing field. The field is sold

as a half field option and as a full field option. Two Half Field kits can be combined to equal a

Full Field kit. The Playing Field is a standard configuration that will be reusable each year.

228-2550

VIQC Full Field (4ft x 8ft) Tiles & Perimeter Set

$199.98

228-3051

VIQC Half Field (4ft x 4ft) Tiles & Perimeter Set

$99.99

$199.98

228-2984

ALL Official VEX Add It Up Game Elements

Contains All Game Elements for One Complete Field

(1x) 228-3054 VEX Add It Up Goal Kit

(2x) 228-2055 VEX Add It Up Ball & Ring Kit

$99.97

228-3054

VEX Add It Up Goal Kit

(2x) Goal Structure

(1x) Hanging Bar

(1x) VEX IQ Elements Bag

$49.99

228-3055

VEX Add It Up Ball & Ring Kit

(18x) Small BuckyBall

(2x) Large BuckyBall

(2x) Scoring Ring

$24.99

This section will outline the specifications which are most important to teams designing a robot

to compete in the VEX IQ Challenge –Add It Up. Though many of the critical dimensions are

included in this section, it may be necessary to consult the field assembly drawings for an

additional level of detail.

Field components may vary slightly from event to event. This is to be expected; teams will need

to adapt accordingly. It is a good design practice to create mechanisms capable of

accommodating variances in the field and game pieces.

The standard VEX IQ Challenge playing field is composed of (32x) floor tiles, (20x) straight wall

segments, and (4x) corner wall segments. Each floor tile is 1 foot (305mm) square and molded

in a very light grey plastic. Black lines 1 inch (25.4mm) wide for a “+” sign over the top of the tile;

these lines are used to determine robot starting squares, corner goals, and can be read by

advanced sensors on the robot.

The standard VEX IQ Challenge playing field is composed of (32x) 1ft square tiles. These tiles

are arranged in a rectangle that is (4x) tiles wide by (8x) tiles long. A 2-1/2” wall is assembled to

the outside of these tiles. All floor tiles and wall sections easily and quickly snap together.

The Small BuckyBall is a hollow plastic truncated icosahedron (a 32-sided object composed of

20 hexagons and 12 pentagons). The diameter of the ball is approximately 80mm (3.15 inches)

measured from pentagon to opposite pentagon. The ball weighs approximately 50 grams (0.11

pounds).

The Large BuckyBall is a hollow plastic truncated icosahedron with a diameter of approximately

127mm (5.0 inches) from pentagon to opposite pentagon, and weighs approximately 100 grams

(0.22 pounds).

The Scoring Ring is a 7 inch diameter, hollow plastic torus that is 2 inches high, and weighs

approximately 95 grams (0.21 pounds).

Otros manuales de Juego de Vex

Vex

Vex Challenge Ringmaster Manual de usuario

Manuales populares de Juego de otras marcas

Outdoor Play

Outdoor Play Box it! 2020 Manual de usuario

Beleduc

Beleduc Papilio Manual de usuario

Costway

Costway UY10001 Manual de usuario

DGT

DGT Centaur Manual de usuario

Radica Games

Radica Games BUCKAROO 630 Manual de usuario

Fundex Games

Fundex Games Timber Tumble Manual de usuario

Go! Gater

Go! Gater 1-1-16453-TP02 Manual de usuario

Smoby

Smoby BBF Challenger Manual de usuario

Hathaway

Hathaway BG2019SK Manual de usuario

Roberto Sport

Roberto Sport INGLESE Manual de usuario

Beleduc

Beleduc XXL Witches' Kitchen Manual de usuario

Koala Technologies

Koala Technologies KoalaWare Spider Eater Manual de usuario

Tomy

Tomy The Magic Oven Manual de usuario

Sega

Sega GAME SHOW Manual de usuario

Tiger Electronics

Tiger Electronics Last Out 7-584-0 Manual de usuario

Fisher-Price

Fisher-Price RollOverRover Manual de usuario

Mattel

Mattel World Championship Football Manual de usuario

Haba

Haba Dragon Diego Dart Manual de usuario